in a research paper what is an abstract

Writing an Abstract for Your Research Paper

Definition and Purpose of Abstracts

An abstract is a short summary of your (published or unpublished) research paper, usually about a paragraph (c. 6-7 sentences, 150-250 words) long. A well-written abstract serves multiple purposes:

• an abstract lets readers get the gist or essence of your paper or article quickly, in order to decide whether to read the full paper;
• an abstract prepares readers to follow the detailed information, analyses, and arguments in your full paper;
• and, later, an abstract helps readers remember key points from your paper.

It’s also worth remembering that search engines and bibliographic databases use abstracts, as well as the title, to identify key terms for indexing your published paper. So what you include in your abstract and in your title are crucial for helping other researchers find your paper or article.

If you are writing an abstract for a course paper, your professor may give you specific guidelines for what to include and how to organize your abstract. Similarly, academic journals often have specific requirements for abstracts. So in addition to following the advice on this page, you should be sure to look for and follow any guidelines from the course or journal you’re writing for.

The Contents of an Abstract

Abstracts contain most of the following kinds of information in brief form. The body of your paper will, of course, develop and explain these ideas much more fully. As you will see in the samples below, the proportion of your abstract that you devote to each kind of information—and the sequence of that information—will vary, depending on the nature and genre of the paper that you are summarizing in your abstract. And in some cases, some of this information is implied, rather than stated explicitly. The Publication Manual of the American Psychological Association , which is widely used in the social sciences, gives specific guidelines for what to include in the abstract for different kinds of papers—for empirical studies, literature reviews or meta-analyses, theoretical papers, methodological papers, and case studies.

Here are the typical kinds of information found in most abstracts:

• the context or background information for your research; the general topic under study; the specific topic of your research
• the central questions or statement of the problem your research addresses
• what’s already known about this question, what previous research has done or shown
• the main reason(s) , the exigency, the rationale , the goals for your research—Why is it important to address these questions? Are you, for example, examining a new topic? Why is that topic worth examining? Are you filling a gap in previous research? Applying new methods to take a fresh look at existing ideas or data? Resolving a dispute within the literature in your field? . . .
• your research and/or analytical methods
• your main findings , results , or arguments
• the significance or implications of your findings or arguments.

Your abstract should be intelligible on its own, without a reader’s having to read your entire paper. And in an abstract, you usually do not cite references—most of your abstract will describe what you have studied in your research and what you have found and what you argue in your paper. In the body of your paper, you will cite the specific literature that informs your research.

When to Write Your Abstract

Although you might be tempted to write your abstract first because it will appear as the very first part of your paper, it’s a good idea to wait to write your abstract until after you’ve drafted your full paper, so that you know what you’re summarizing.

What follows are some sample abstracts in published papers or articles, all written by faculty at UW-Madison who come from a variety of disciplines. We have annotated these samples to help you see the work that these authors are doing within their abstracts.

Choosing Verb Tenses within Your Abstract

The social science sample (Sample 1) below uses the present tense to describe general facts and interpretations that have been and are currently true, including the prevailing explanation for the social phenomenon under study. That abstract also uses the present tense to describe the methods, the findings, the arguments, and the implications of the findings from their new research study. The authors use the past tense to describe previous research.

The humanities sample (Sample 2) below uses the past tense to describe completed events in the past (the texts created in the pulp fiction industry in the 1970s and 80s) and uses the present tense to describe what is happening in those texts, to explain the significance or meaning of those texts, and to describe the arguments presented in the article.

The science samples (Samples 3 and 4) below use the past tense to describe what previous research studies have done and the research the authors have conducted, the methods they have followed, and what they have found. In their rationale or justification for their research (what remains to be done), they use the present tense. They also use the present tense to introduce their study (in Sample 3, “Here we report . . .”) and to explain the significance of their study (In Sample 3, This reprogramming . . . “provides a scalable cell source for. . .”).

Sample Abstract 1

From the social sciences.

Reporting new findings about the reasons for increasing economic homogamy among spouses

Gonalons-Pons, Pilar, and Christine R. Schwartz. “Trends in Economic Homogamy: Changes in Assortative Mating or the Division of Labor in Marriage?” Demography , vol. 54, no. 3, 2017, pp. 985-1005.

Sample Abstract 2

From the humanities.

Analyzing underground pulp fiction publications in Tanzania, this article makes an argument about the cultural significance of those publications

Emily Callaci. “Street Textuality: Socialism, Masculinity, and Urban Belonging in Tanzania’s Pulp Fiction Publishing Industry, 1975-1985.” Comparative Studies in Society and History , vol. 59, no. 1, 2017, pp. 183-210.

Sample Abstract/Summary 3

From the sciences.

Reporting a new method for reprogramming adult mouse fibroblasts into induced cardiac progenitor cells

Lalit, Pratik A., Max R. Salick, Daryl O. Nelson, Jayne M. Squirrell, Christina M. Shafer, Neel G. Patel, Imaan Saeed, Eric G. Schmuck, Yogananda S. Markandeya, Rachel Wong, Martin R. Lea, Kevin W. Eliceiri, Timothy A. Hacker, Wendy C. Crone, Michael Kyba, Daniel J. Garry, Ron Stewart, James A. Thomson, Karen M. Downs, Gary E. Lyons, and Timothy J. Kamp. “Lineage Reprogramming of Fibroblasts into Proliferative Induced Cardiac Progenitor Cells by Defined Factors.” Cell Stem Cell , vol. 18, 2016, pp. 354-367.

Sample Abstract 4, a Structured Abstract

Reporting results about the effectiveness of antibiotic therapy in managing acute bacterial sinusitis, from a rigorously controlled study

Note: This journal requires authors to organize their abstract into four specific sections, with strict word limits. Because the headings for this structured abstract are self-explanatory, we have chosen not to add annotations to this sample abstract.

Wald, Ellen R., David Nash, and Jens Eickhoff. “Effectiveness of Amoxicillin/Clavulanate Potassium in the Treatment of Acute Bacterial Sinusitis in Children.” Pediatrics , vol. 124, no. 1, 2009, pp. 9-15.

“OBJECTIVE: The role of antibiotic therapy in managing acute bacterial sinusitis (ABS) in children is controversial. The purpose of this study was to determine the effectiveness of high-dose amoxicillin/potassium clavulanate in the treatment of children diagnosed with ABS.

METHODS : This was a randomized, double-blind, placebo-controlled study. Children 1 to 10 years of age with a clinical presentation compatible with ABS were eligible for participation. Patients were stratified according to age (<6 or ≥6 years) and clinical severity and randomly assigned to receive either amoxicillin (90 mg/kg) with potassium clavulanate (6.4 mg/kg) or placebo. A symptom survey was performed on days 0, 1, 2, 3, 5, 7, 10, 20, and 30. Patients were examined on day 14. Children’s conditions were rated as cured, improved, or failed according to scoring rules.

RESULTS: Two thousand one hundred thirty-five children with respiratory complaints were screened for enrollment; 139 (6.5%) had ABS. Fifty-eight patients were enrolled, and 56 were randomly assigned. The mean age was 6630 months. Fifty (89%) patients presented with persistent symptoms, and 6 (11%) presented with nonpersistent symptoms. In 24 (43%) children, the illness was classified as mild, whereas in the remaining 32 (57%) children it was severe. Of the 28 children who received the antibiotic, 14 (50%) were cured, 4 (14%) were improved, 4(14%) experienced treatment failure, and 6 (21%) withdrew. Of the 28children who received placebo, 4 (14%) were cured, 5 (18%) improved, and 19 (68%) experienced treatment failure. Children receiving the antibiotic were more likely to be cured (50% vs 14%) and less likely to have treatment failure (14% vs 68%) than children receiving the placebo.

CONCLUSIONS : ABS is a common complication of viral upper respiratory infections. Amoxicillin/potassium clavulanate results in significantly more cures and fewer failures than placebo, according to parental report of time to resolution.” (9)

Some Excellent Advice about Writing Abstracts for Basic Science Research Papers, by Professor Adriano Aguzzi from the Institute of Neuropathology at the University of Zurich:

Academic and Professional Writing

This is an accordion element with a series of buttons that open and close related content panels.

Analysis Papers

Reading Poetry

A Short Guide to Close Reading for Literary Analysis

Using Literary Quotations

Play Reviews

Writing a Rhetorical Précis to Analyze Nonfiction Texts

Incorporating Interview Data

Grant Proposals

Planning and Writing a Grant Proposal: The Basics

Additional Resources for Grants and Proposal Writing

Job Materials and Application Essays

Writing Personal Statements for Ph.D. Programs

• Before you begin: useful tips for writing your essay
• Guided brainstorming exercises
• Get more help with your essay
• Frequently Asked Questions

Resume Writing Tips

CV Writing Tips

Cover Letters

Business Letters

Proposals and Dissertations

Resources for Proposal Writers

Resources for Dissertators

Research Papers

Planning and Writing Research Papers

Quoting and Paraphrasing

Writing Annotated Bibliographies

Creating Poster Presentations

Thank-You Notes

Advice for Students Writing Thank-You Notes to Donors

Reading for a Review

Critical Reviews

Writing a Review of Literature

Scientific Reports

Scientific Report Format

Sample Lab Assignment

Writing for the Web

Writing an Effective Blog Post

Writing for Social Media: A Guide for Academics

Generate accurate APA citations for free

• Knowledge Base
• APA Style 7th edition
• How to write and format an APA abstract

APA Abstract (2020) | Formatting, Length, and Keywords

Published on November 6, 2020 by Raimo Streefkerk . Revised on January 17, 2024.

An APA abstract is a comprehensive summary of your paper in which you briefly address the research problem , hypotheses , methods , results , and implications of your research. It’s placed on a separate page right after the title page and is usually no longer than 250 words.

Most professional papers that are submitted for publication require an abstract. Student papers typically don’t need an abstract, unless instructed otherwise.

Instantly correct all language mistakes in your text

Upload your document to correct all your mistakes in minutes

Table of contents

How to format the abstract, how to write an apa abstract, which keywords to use, frequently asked questions, apa abstract example.

Formatting instructions

Follow these five steps to format your abstract in APA Style:

• Insert a running head (for a professional paper—not needed for a student paper) and page number.
• Set page margins to 1 inch (2.54 cm).
• Write “Abstract” (bold and centered) at the top of the page.
• Do not indent the first line.
• Double-space the text.
• Use a legible font like Times New Roman (12 pt.).
• Limit the length to 250 words.
• Indent the first line 0.5 inches.
• Write the label “Keywords:” (italicized).
• Write keywords in lowercase letters.
• Separate keywords with commas.
• Do not use a period after the keywords.

Prevent plagiarism. Run a free check.

The abstract is a self-contained piece of text that informs the reader what your research is about. It’s best to write the abstract after you’re finished with the rest of your paper.

The questions below may help structure your abstract. Try answering them in one to three sentences each.

• What is the problem? Outline the objective, research questions , and/or hypotheses .
• What has been done? Explain your research methods .
• What did you discover? Summarize the key findings and conclusions .
• What do the findings mean? Summarize the discussion and recommendations .

Check out our guide on how to write an abstract for more guidance and an annotated example.

Guide: writing an abstract

At the end of the abstract, you may include a few keywords that will be used for indexing if your paper is published on a database. Listing your keywords will help other researchers find your work.

Choosing relevant keywords is essential. Try to identify keywords that address your topic, method, or population. APA recommends including three to five keywords.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarizes the contents of your paper.

An APA abstract is around 150–250 words long. However, always check your target journal’s guidelines and don’t exceed the specified word count.

In an APA Style paper , the abstract is placed on a separate page after the title page (page 2).

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

Streefkerk, R. (2024, January 17). APA Abstract (2020) | Formatting, Length, and Keywords. Scribbr. Retrieved September 9, 2024, from https://www.scribbr.com/apa-style/apa-abstract/

Is this article helpful?

Raimo Streefkerk

Other students also liked, apa headings and subheadings, apa running head, apa title page (7th edition) | template for students & professionals, scribbr apa citation checker.

An innovative new tool that checks your APA citations with AI software. Say goodbye to inaccurate citations!

• Grammar Checker
• Paraphrasing Tool
• Critique Report
• Writing Reports
• Learn Blog Grammar Guide Community Events FAQ
• Grammar Guide

How to Write an Abstract (With Examples)

By Sarah Oakley

Table of Contents

What is an abstract in a paper, how long should an abstract be, 5 steps for writing an abstract, examples of an abstract, how prowritingaid can help you write an abstract.

If you are writing a scientific research paper or a book proposal, you need to know how to write an abstract, which summarizes the contents of the paper or book.

When researchers are looking for peer-reviewed papers to use in their studies, the first place they will check is the abstract to see if it applies to their work. Therefore, your abstract is one of the most important parts of your entire paper.

In this article, we’ll explain what an abstract is, what it should include, and how to write one.

An abstract is a concise summary of the details within a report. Some abstracts give more details than others, but the main things you’ll be talking about are why you conducted the research, what you did, and what the results show.

When a reader is deciding whether to read your paper completely, they will first look at the abstract. You need to be concise in your abstract and give the reader the most important information so they can determine if they want to read the whole paper.

Remember that an abstract is the last thing you’ll want to write for the research paper because it directly references parts of the report. If you haven’t written the report, you won’t know what to include in your abstract.

If you are writing a paper for a journal or an assignment, the publication or academic institution might have specific formatting rules for how long your abstract should be. However, if they don’t, most abstracts are between 150 and 300 words long.

A short word count means your writing has to be precise and without filler words or phrases. Once you’ve written a first draft, you can always use an editing tool, such as ProWritingAid, to identify areas where you can reduce words and increase readability.

If your abstract is over the word limit, and you’ve edited it but still can’t figure out how to reduce it further, your abstract might include some things that aren’t needed. Here’s a list of three elements you can remove from your abstract:

Discussion : You don’t need to go into detail about the findings of your research because your reader will find your discussion within the paper.

Definition of terms : Your readers are interested the field you are writing about, so they are likely to understand the terms you are using. If not, they can always look them up. Your readers do not expect you to give a definition of terms in your abstract.

References and citations : You can mention there have been studies that support or have inspired your research, but you do not need to give details as the reader will find them in your bibliography.

Good writing = better grades

ProWritingAid will help you improve the style, strength, and clarity of all your assignments.

If you’ve never written an abstract before, and you’re wondering how to write an abstract, we’ve got some steps for you to follow. It’s best to start with planning your abstract, so we’ve outlined the details you need to include in your plan before you write.

Remember to consider your audience when you’re planning and writing your abstract. They are likely to skim read your abstract, so you want to be sure your abstract delivers all the information they’re expecting to see at key points.

1. What Should an Abstract Include?

Abstracts have a lot of information to cover in a short number of words, so it’s important to know what to include. There are three elements that need to be present in your abstract:

Your context is the background for where your research sits within your field of study. You should briefly mention any previous scientific papers or experiments that have led to your hypothesis and how research develops in those studies.

Your hypothesis is your prediction of what your study will show. As you are writing your abstract after you have conducted your research, you should still include your hypothesis in your abstract because it shows the motivation for your paper.

Throughout your abstract, you also need to include keywords and phrases that will help researchers to find your article in the databases they’re searching. Make sure the keywords are specific to your field of study and the subject you’re reporting on, otherwise your article might not reach the relevant audience.

2. Can You Use First Person in an Abstract?

You might think that first person is too informal for a research paper, but it’s not. Historically, writers of academic reports avoided writing in first person to uphold the formality standards of the time. However, first person is more accepted in research papers in modern times.

If you’re still unsure whether to write in first person for your abstract, refer to any style guide rules imposed by the journal you’re writing for or your teachers if you are writing an assignment.

3. Abstract Structure

Some scientific journals have strict rules on how to structure an abstract, so it’s best to check those first. If you don’t have any style rules to follow, try using the IMRaD structure, which stands for Introduction, Methodology, Results, and Discussion.

Following the IMRaD structure, start with an introduction. The amount of background information you should include depends on your specific research area. Adding a broad overview gives you less room to include other details. Remember to include your hypothesis in this section.

The next part of your abstract should cover your methodology. Try to include the following details if they apply to your study:

What type of research was conducted?

How were the test subjects sampled?

What were the sample sizes?

What was done to each group?

How long was the experiment?

How was data recorded and interpreted?

Following the methodology, include a sentence or two about the results, which is where your reader will determine if your research supports or contradicts their own investigations.

The results are also where most people will want to find out what your outcomes were, even if they are just mildly interested in your research area. You should be specific about all the details but as concise as possible.

The last few sentences are your conclusion. It needs to explain how your findings affect the context and whether your hypothesis was correct. Include the primary take-home message, additional findings of importance, and perspective. Also explain whether there is scope for further research into the subject of your report.

Your conclusion should be honest and give the reader the ultimate message that your research shows. Readers trust the conclusion, so make sure you’re not fabricating the results of your research. Some readers won’t read your entire paper, but this section will tell them if it’s worth them referencing it in their own study.

4. How to Start an Abstract

The first line of your abstract should give your reader the context of your report by providing background information. You can use this sentence to imply the motivation for your research.

You don’t need to use a hook phrase or device in your first sentence to grab the reader’s attention. Your reader will look to establish relevance quickly, so readability and clarity are more important than trying to persuade the reader to read on.

5. How to Format an Abstract

Most abstracts use the same formatting rules, which help the reader identify the abstract so they know where to look for it.

Here’s a list of formatting guidelines for writing an abstract:

Stick to one paragraph

Use block formatting with no indentation at the beginning

Put your abstract straight after the title and acknowledgements pages

Use present or past tense, not future tense

There are two primary types of abstract you could write for your paper—descriptive and informative.

An informative abstract is the most common, and they follow the structure mentioned previously. They are longer than descriptive abstracts because they cover more details.

Descriptive abstracts differ from informative abstracts, as they don’t include as much discussion or detail. The word count for a descriptive abstract is between 50 and 150 words.

Here is an example of an informative abstract:

A growing trend exists for authors to employ a more informal writing style that uses “we” in academic writing to acknowledge one’s stance and engagement. However, few studies have compared the ways in which the first-person pronoun “we” is used in the abstracts and conclusions of empirical papers. To address this lacuna in the literature, this study conducted a systematic corpus analysis of the use of “we” in the abstracts and conclusions of 400 articles collected from eight leading electrical and electronic (EE) engineering journals. The abstracts and conclusions were extracted to form two subcorpora, and an integrated framework was applied to analyze and seek to explain how we-clusters and we-collocations were employed. Results revealed whether authors’ use of first-person pronouns partially depends on a journal policy. The trend of using “we” showed that a yearly increase occurred in the frequency of “we” in EE journal papers, as well as the existence of three “we-use” types in the article conclusions and abstracts: exclusive, inclusive, and ambiguous. Other possible “we-use” alternatives such as “I” and other personal pronouns were used very rarely—if at all—in either section. These findings also suggest that the present tense was used more in article abstracts, but the present perfect tense was the most preferred tense in article conclusions. Both research and pedagogical implications are proffered and critically discussed.

Wang, S., Tseng, W.-T., & Johanson, R. (2021). To We or Not to We: Corpus-Based Research on First-Person Pronoun Use in Abstracts and Conclusions. SAGE Open, 11(2).

Here is an example of a descriptive abstract:

From the 1850s to the present, considerable criminological attention has focused on the development of theoretically-significant systems for classifying crime. This article reviews and attempts to evaluate a number of these efforts, and we conclude that further work on this basic task is needed. The latter part of the article explicates a conceptual foundation for a crime pattern classification system, and offers a preliminary taxonomy of crime.

Farr, K. A., & Gibbons, D. C. (1990). Observations on the Development of Crime Categories. International Journal of Offender Therapy and Comparative Criminology, 34(3), 223–237.

If you want to ensure your abstract is grammatically correct and easy to read, you can use ProWritingAid to edit it. The software integrates with Microsoft Word, Google Docs, and most web browsers, so you can make the most of it wherever you’re writing your paper.

Before you edit with ProWritingAid, make sure the suggestions you are seeing are relevant for your document by changing the document type to “Abstract” within the Academic writing style section.

You can use the Readability report to check your abstract for places to improve the clarity of your writing. Some suggestions might show you where to remove words, which is great if you’re over your word count.

We hope the five steps and examples we’ve provided help you write a great abstract for your research paper.

Sarah Oakley

Get started with prowritingaid.

Drop us a line or let's stay in touch via:

• Privacy Policy

Home » Research Paper Abstract – Writing Guide and Examples

Research Paper Abstract – Writing Guide and Examples

Table of Contents

Research Paper Abstract

Research Paper Abstract is a brief summary of a research pape r that describes the study’s purpose, methods, findings, and conclusions . It is often the first section of the paper that readers encounter, and its purpose is to provide a concise and accurate overview of the paper’s content. The typical length of an abstract is usually around 150-250 words, and it should be written in a concise and clear manner.

Research Paper Abstract Structure

The structure of a research paper abstract usually includes the following elements:

• Background or Introduction: Briefly describe the problem or research question that the study addresses.
• Methods : Explain the methodology used to conduct the study, including the participants, materials, and procedures.
• Results : Summarize the main findings of the study, including statistical analyses and key outcomes.
• Conclusions : Discuss the implications of the study’s findings and their significance for the field, as well as any limitations or future directions for research.
• Keywords : List a few keywords that describe the main topics or themes of the research.

How to Write Research Paper Abstract

Here are the steps to follow when writing a research paper abstract:

• Start by reading your paper: Before you write an abstract, you should have a complete understanding of your paper. Read through the paper carefully, making sure you understand the purpose, methods, results, and conclusions.
• Identify the key components : Identify the key components of your paper, such as the research question, methods used, results obtained, and conclusion reached.
• Write a draft: Write a draft of your abstract, using concise and clear language. Make sure to include all the important information, but keep it short and to the point. A good rule of thumb is to keep your abstract between 150-250 words.
• Use clear and concise language : Use clear and concise language to explain the purpose of your study, the methods used, the results obtained, and the conclusions drawn.
• Emphasize your findings: Emphasize your findings in the abstract, highlighting the key results and the significance of your study.
• Revise and edit: Once you have a draft, revise and edit it to ensure that it is clear, concise, and free from errors.
• Check the formatting: Finally, check the formatting of your abstract to make sure it meets the requirements of the journal or conference where you plan to submit it.

Research Paper Abstract Examples

Research Paper Abstract Examples could be following:

Title : “The Effectiveness of Cognitive-Behavioral Therapy for Treating Anxiety Disorders: A Meta-Analysis”

Abstract : This meta-analysis examines the effectiveness of cognitive-behavioral therapy (CBT) in treating anxiety disorders. Through the analysis of 20 randomized controlled trials, we found that CBT is a highly effective treatment for anxiety disorders, with large effect sizes across a range of anxiety disorders, including generalized anxiety disorder, panic disorder, and social anxiety disorder. Our findings support the use of CBT as a first-line treatment for anxiety disorders and highlight the importance of further research to identify the mechanisms underlying its effectiveness.

Title : “Exploring the Role of Parental Involvement in Children’s Education: A Qualitative Study”

Abstract : This qualitative study explores the role of parental involvement in children’s education. Through in-depth interviews with 20 parents of children in elementary school, we found that parental involvement takes many forms, including volunteering in the classroom, helping with homework, and communicating with teachers. We also found that parental involvement is influenced by a range of factors, including parent and child characteristics, school culture, and socio-economic status. Our findings suggest that schools and educators should prioritize building strong partnerships with parents to support children’s academic success.

Title : “The Impact of Exercise on Cognitive Function in Older Adults: A Systematic Review and Meta-Analysis”

Abstract : This paper presents a systematic review and meta-analysis of the existing literature on the impact of exercise on cognitive function in older adults. Through the analysis of 25 randomized controlled trials, we found that exercise is associated with significant improvements in cognitive function, particularly in the domains of executive function and attention. Our findings highlight the potential of exercise as a non-pharmacological intervention to support cognitive health in older adults.

When to Write Research Paper Abstract

The abstract of a research paper should typically be written after you have completed the main body of the paper. This is because the abstract is intended to provide a brief summary of the key points and findings of the research, and you can’t do that until you have completed the research and written about it in detail.

Once you have completed your research paper, you can begin writing your abstract. It is important to remember that the abstract should be a concise summary of your research paper, and should be written in a way that is easy to understand for readers who may not have expertise in your specific area of research.

Purpose of Research Paper Abstract

The purpose of a research paper abstract is to provide a concise summary of the key points and findings of a research paper. It is typically a brief paragraph or two that appears at the beginning of the paper, before the introduction, and is intended to give readers a quick overview of the paper’s content.

The abstract should include a brief statement of the research problem, the methods used to investigate the problem, the key results and findings, and the main conclusions and implications of the research. It should be written in a clear and concise manner, avoiding jargon and technical language, and should be understandable to a broad audience.

The abstract serves as a way to quickly and easily communicate the main points of a research paper to potential readers, such as academics, researchers, and students, who may be looking for information on a particular topic. It can also help researchers determine whether a paper is relevant to their own research interests and whether they should read the full paper.

About the author

Muhammad Hassan

Researcher, Academic Writer, Web developer

You may also like

Research Paper Title – Writing Guide and Example

Future Research – Thesis Guide

Context of the Study – Writing Guide and Examples

Implications in Research – Types, Examples and...

Research Methodology – Types, Examples and...

Research Design – Types, Methods and Examples

• USC Libraries
• Research Guides

Organizing Your Social Sciences Research Paper

• 3. The Abstract
• Purpose of Guide
• Design Flaws to Avoid
• Independent and Dependent Variables
• Glossary of Research Terms
• Reading Research Effectively
• Narrowing a Topic Idea
• Broadening a Topic Idea
• Extending the Timeliness of a Topic Idea
• Academic Writing Style
• Applying Critical Thinking
• Choosing a Title
• Making an Outline
• Paragraph Development
• Research Process Video Series
• Executive Summary
• The C.A.R.S. Model
• Background Information
• The Research Problem/Question
• Theoretical Framework
• Citation Tracking
• Content Alert Services
• Evaluating Sources
• Primary Sources
• Secondary Sources
• Tiertiary Sources
• Scholarly vs. Popular Publications
• Qualitative Methods
• Quantitative Methods
• Insiderness
• Using Non-Textual Elements
• Limitations of the Study
• Common Grammar Mistakes
• Writing Concisely
• Avoiding Plagiarism
• Footnotes or Endnotes?
• Further Readings
• Generative AI and Writing
• USC Libraries Tutorials and Other Guides
• Bibliography

An abstract summarizes, usually in one paragraph of 300 words or less, the major aspects of the entire paper in a prescribed sequence that includes: 1) the overall purpose of the study and the research problem(s) you investigated; 2) the basic design of the study; 3) major findings or trends found as a result of your analysis; and, 4) a brief summary of your interpretations and conclusions.

Writing an Abstract. The Writing Center. Clarion University, 2009; Writing an Abstract for Your Research Paper. The Writing Center, University of Wisconsin, Madison; Koltay, Tibor. Abstracts and Abstracting: A Genre and Set of Skills for the Twenty-first Century . Oxford, UK: Chandos Publishing, 2010;

Importance of a Good Abstract

Sometimes your professor will ask you to include an abstract, or general summary of your work, with your research paper. The abstract allows you to elaborate upon each major aspect of the paper and helps readers decide whether they want to read the rest of the paper. Therefore, enough key information [e.g., summary results, observations, trends, etc.] must be included to make the abstract useful to someone who may want to examine your work.

How do you know when you have enough information in your abstract? A simple rule-of-thumb is to imagine that you are another researcher doing a similar study. Then ask yourself: if your abstract was the only part of the paper you could access, would you be happy with the amount of information presented there? Does it tell the whole story about your study? If the answer is "no" then the abstract likely needs to be revised.

Farkas, David K. “A Scheme for Understanding and Writing Summaries.” Technical Communication 67 (August 2020): 45-60;  How to Write a Research Abstract. Office of Undergraduate Research. University of Kentucky; Staiger, David L. “What Today’s Students Need to Know about Writing Abstracts.” International Journal of Business Communication January 3 (1966): 29-33; Swales, John M. and Christine B. Feak. Abstracts and the Writing of Abstracts . Ann Arbor, MI: University of Michigan Press, 2009.

Structure and Writing Style

I.  Types of Abstracts

To begin, you need to determine which type of abstract you should include with your paper. There are four general types.

Critical Abstract A critical abstract provides, in addition to describing main findings and information, a judgment or comment about the study’s validity, reliability, or completeness. The researcher evaluates the paper and often compares it with other works on the same subject. Critical abstracts are generally 400-500 words in length due to the additional interpretive commentary. These types of abstracts are used infrequently.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgments about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarized. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less. Informative Abstract The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Highlight Abstract A highlight abstract is specifically written to attract the reader’s attention to the study. No pretense is made of there being either a balanced or complete picture of the paper and, in fact, incomplete and leading remarks may be used to spark the reader’s interest. In that a highlight abstract cannot stand independent of its associated article, it is not a true abstract and, therefore, rarely used in academic writing.

II.  Writing Style

Use the active voice when possible , but note that much of your abstract may require passive sentence constructions. Regardless, write your abstract using concise, but complete, sentences. Get to the point quickly and always use the past tense because you are reporting on a study that has been completed.

Abstracts should be formatted as a single paragraph in a block format and with no paragraph indentations. In most cases, the abstract page immediately follows the title page. Do not number the page. Rules set forth in writing manual vary but, in general, you should center the word "Abstract" at the top of the page with double spacing between the heading and the abstract. The final sentences of an abstract concisely summarize your study’s conclusions, implications, or applications to practice and, if appropriate, can be followed by a statement about the need for additional research revealed from the findings.

Composing Your Abstract

Although it is the first section of your paper, the abstract should be written last since it will summarize the contents of your entire paper. A good strategy to begin composing your abstract is to take whole sentences or key phrases from each section of the paper and put them in a sequence that summarizes the contents. Then revise or add phrases or words to make the narrative flow clearly and smoothly. A useful strategy is to avoid using conjunctions [ e.g. and, but, if] that connect long clauses or sentences and, instead, write short, concise sentences . Note that statistical findings should be reported parenthetically [i.e., written in parentheses].

Before handing in your final paper, check to make sure that the information in the abstract completely agrees with what you have written in the paper. Think of the abstract as a sequential set of complete sentences describing the most crucial information using the fewest necessary words. The abstract SHOULD NOT contain:

• A catchy introductory phrase, provocative quote, or other device to grab the reader's attention,
• Lengthy background or contextual information,
• Redundant phrases, unnecessary adverbs and adjectives, and repetitive information;
• Acronyms or abbreviations,
• References to other literature [say something like, "current research shows that..." or "studies have indicated..."],
• Using ellipticals [i.e., ending with "..."] or incomplete sentences,
• Jargon or terms that may be confusing to the reader,
• Citations to other works, and
• Any sort of image, illustration, figure, or table, or references to them.

Abstract. Writing Center. University of Kansas; Abstract. The Structure, Format, Content, and Style of a Journal-Style Scientific Paper. Department of Biology. Bates College; Abstracts. The Writing Center. University of North Carolina; Borko, Harold and Seymour Chatman. "Criteria for Acceptable Abstracts: A Survey of Abstracters' Instructions." American Documentation 14 (April 1963): 149-160; Abstracts. The Writer’s Handbook. Writing Center. University of Wisconsin, Madison; Hartley, James and Lucy Betts. "Common Weaknesses in Traditional Abstracts in the Social Sciences." Journal of the American Society for Information Science and Technology 60 (October 2009): 2010-2018; Koltay, Tibor. Abstracts and Abstracting: A Genre and Set of Skills for the Twenty-first Century. Oxford, UK: Chandos Publishing, 2010; Procter, Margaret. The Abstract. University College Writing Centre. University of Toronto; Riordan, Laura. “Mastering the Art of Abstracts.” The Journal of the American Osteopathic Association 115 (January 2015 ): 41-47; Writing Report Abstracts. The Writing Lab and The OWL. Purdue University; Writing Abstracts. Writing Tutorial Services, Center for Innovative Teaching and Learning. Indiana University; Koltay, Tibor. Abstracts and Abstracting: A Genre and Set of Skills for the Twenty-First Century . Oxford, UK: 2010; Writing an Abstract for Your Research Paper. The Writing Center, University of Wisconsin, Madison.

Writing Tip

Never Cite Just the Abstract!

Citing to just a journal article's abstract does not confirm for the reader that you have conducted a thorough or reliable review of the literature. If the full-text is not available, go to the USC Libraries main page and enter the title of the article [NOT the title of the journal]. If the Libraries have a subscription to the journal, the article should appear with a link to the full-text or to the journal publisher page where you can get the article. If the article does not appear, try searching Google Scholar using the link on the USC Libraries main page [scroll down under the heading Quick Links]. If you still can't find the article after doing this, contact a librarian or you can request it from our free i nterlibrary loan and document delivery service .

• << Previous: Research Process Video Series
• Next: Executive Summary >>
• Last Updated: Sep 4, 2024 9:40 AM
• URL: https://libguides.usc.edu/writingguide

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, automatically generate references for free.

• Knowledge Base
• Dissertation
• How to Write an Abstract | Steps & Examples

How to Write an Abstract | Steps & Examples

Published on 1 March 2019 by Shona McCombes . Revised on 10 October 2022 by Eoghan Ryan.

An abstract is a short summary of a longer work (such as a dissertation or research paper ). The abstract concisely reports the aims and outcomes of your research, so that readers know exactly what your paper is about.

Although the structure may vary slightly depending on your discipline, your abstract should describe the purpose of your work, the methods you’ve used, and the conclusions you’ve drawn.

One common way to structure your abstract is to use the IMRaD structure. This stands for:

• Introduction

Abstracts are usually around 100–300 words, but there’s often a strict word limit, so make sure to check the relevant requirements.

In a dissertation or thesis , include the abstract on a separate page, after the title page and acknowledgements but before the table of contents .

Instantly correct all language mistakes in your text

Be assured that you'll submit flawless writing. Upload your document to correct all your mistakes.

Table of contents

Abstract example, when to write an abstract, step 1: introduction, step 2: methods, step 3: results, step 4: discussion, tips for writing an abstract, frequently asked questions about abstracts.

Hover over the different parts of the abstract to see how it is constructed.

This paper examines the role of silent movies as a mode of shared experience in the UK during the early twentieth century. At this time, high immigration rates resulted in a significant percentage of non-English-speaking citizens. These immigrants faced numerous economic and social obstacles, including exclusion from public entertainment and modes of discourse (newspapers, theater, radio).

Incorporating evidence from reviews, personal correspondence, and diaries, this study demonstrates that silent films were an affordable and inclusive source of entertainment. It argues for the accessible economic and representational nature of early cinema. These concerns are particularly evident in the low price of admission and in the democratic nature of the actors’ exaggerated gestures, which allowed the plots and action to be easily grasped by a diverse audience despite language barriers.

Keywords: silent movies, immigration, public discourse, entertainment, early cinema, language barriers.

The only proofreading tool specialized in correcting academic writing

The academic proofreading tool has been trained on 1000s of academic texts and by native English editors. Making it the most accurate and reliable proofreading tool for students.

Correct my document today

You will almost always have to include an abstract when:

• Completing a thesis or dissertation
• Submitting a research paper to an academic journal
• Writing a book proposal
• Applying for research grants

It’s easiest to write your abstract last, because it’s a summary of the work you’ve already done. Your abstract should:

• Be a self-contained text, not an excerpt from your paper
• Be fully understandable on its own
• Reflect the structure of your larger work

Start by clearly defining the purpose of your research. What practical or theoretical problem does the research respond to, or what research question did you aim to answer?

You can include some brief context on the social or academic relevance of your topic, but don’t go into detailed background information. If your abstract uses specialised terms that would be unfamiliar to the average academic reader or that have various different meanings, give a concise definition.

After identifying the problem, state the objective of your research. Use verbs like “investigate,” “test,” “analyse,” or “evaluate” to describe exactly what you set out to do.

This part of the abstract can be written in the present or past simple tense  but should never refer to the future, as the research is already complete.

• This study will investigate the relationship between coffee consumption and productivity.
• This study investigates the relationship between coffee consumption and productivity.

Next, indicate the research methods that you used to answer your question. This part should be a straightforward description of what you did in one or two sentences. It is usually written in the past simple tense, as it refers to completed actions.

• Structured interviews will be conducted with 25 participants.
• Structured interviews were conducted with 25 participants.

Don’t evaluate validity or obstacles here — the goal is not to give an account of the methodology’s strengths and weaknesses, but to give the reader a quick insight into the overall approach and procedures you used.

Next, summarise the main research results . This part of the abstract can be in the present or past simple tense.

• Our analysis has shown a strong correlation between coffee consumption and productivity.
• Our analysis shows a strong correlation between coffee consumption and productivity.
• Our analysis showed a strong correlation between coffee consumption and productivity.

Depending on how long and complex your research is, you may not be able to include all results here. Try to highlight only the most important findings that will allow the reader to understand your conclusions.

Finally, you should discuss the main conclusions of your research : what is your answer to the problem or question? The reader should finish with a clear understanding of the central point that your research has proved or argued. Conclusions are usually written in the present simple tense.

• We concluded that coffee consumption increases productivity.
• We conclude that coffee consumption increases productivity.

If there are important limitations to your research (for example, related to your sample size or methods), you should mention them briefly in the abstract. This allows the reader to accurately assess the credibility and generalisability of your research.

If your aim was to solve a practical problem, your discussion might include recommendations for implementation. If relevant, you can briefly make suggestions for further research.

If your paper will be published, you might have to add a list of keywords at the end of the abstract. These keywords should reference the most important elements of the research to help potential readers find your paper during their own literature searches.

Be aware that some publication manuals, such as APA Style , have specific formatting requirements for these keywords.

It can be a real challenge to condense your whole work into just a couple of hundred words, but the abstract will be the first (and sometimes only) part that people read, so it’s important to get it right. These strategies can help you get started.

Read other abstracts

The best way to learn the conventions of writing an abstract in your discipline is to read other people’s. You probably already read lots of journal article abstracts while conducting your literature review —try using them as a framework for structure and style.

You can also find lots of dissertation abstract examples in thesis and dissertation databases .

Reverse outline

Not all abstracts will contain precisely the same elements. For longer works, you can write your abstract through a process of reverse outlining.

For each chapter or section, list keywords and draft one to two sentences that summarise the central point or argument. This will give you a framework of your abstract’s structure. Next, revise the sentences to make connections and show how the argument develops.

Write clearly and concisely

A good abstract is short but impactful, so make sure every word counts. Each sentence should clearly communicate one main point.

To keep your abstract or summary short and clear:

• Avoid passive sentences: Passive constructions are often unnecessarily long. You can easily make them shorter and clearer by using the active voice.
• Avoid long sentences: Substitute longer expressions for concise expressions or single words (e.g., “In order to” for “To”).
• Avoid obscure jargon: The abstract should be understandable to readers who are not familiar with your topic.
• Avoid repetition and filler words: Replace nouns with pronouns when possible and eliminate unnecessary words.
• Avoid detailed descriptions: An abstract is not expected to provide detailed definitions, background information, or discussions of other scholars’ work. Instead, include this information in the body of your thesis or paper.

If you’re struggling to edit down to the required length, you can get help from expert editors with Scribbr’s professional proofreading services .

Check your formatting

If you are writing a thesis or dissertation or submitting to a journal, there are often specific formatting requirements for the abstract—make sure to check the guidelines and format your work correctly. For APA research papers you can follow the APA abstract format .

Checklist: Abstract

The word count is within the required length, or a maximum of one page.

The abstract appears after the title page and acknowledgements and before the table of contents .

I have clearly stated my research problem and objectives.

I have briefly described my methodology .

I have summarized the most important results .

I have stated my main conclusions .

I have mentioned any important limitations and recommendations.

The abstract can be understood by someone without prior knowledge of the topic.

You've written a great abstract! Use the other checklists to continue improving your thesis or dissertation.

An abstract is a concise summary of an academic text (such as a journal article or dissertation ). It serves two main purposes:

• To help potential readers determine the relevance of your paper for their own research.
• To communicate your key findings to those who don’t have time to read the whole paper.

Abstracts are often indexed along with keywords on academic databases, so they make your work more easily findable. Since the abstract is the first thing any reader sees, it’s important that it clearly and accurately summarises the contents of your paper.

An abstract for a thesis or dissertation is usually around 150–300 words. There’s often a strict word limit, so make sure to check your university’s requirements.

The abstract is the very last thing you write. You should only write it after your research is complete, so that you can accurately summarize the entirety of your thesis or paper.

Avoid citing sources in your abstract . There are two reasons for this:

• The abstract should focus on your original research, not on the work of others.
• The abstract should be self-contained and fully understandable without reference to other sources.

There are some circumstances where you might need to mention other sources in an abstract: for example, if your research responds directly to another study or focuses on the work of a single theorist. In general, though, don’t include citations unless absolutely necessary.

The abstract appears on its own page, after the title page and acknowledgements but before the table of contents .

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the ‘Cite this Scribbr article’ button to automatically add the citation to our free Reference Generator.

McCombes, S. (2022, October 10). How to Write an Abstract | Steps & Examples. Scribbr. Retrieved 9 September 2024, from https://www.scribbr.co.uk/thesis-dissertation/abstract/

Is this article helpful?

Shona McCombes

Other students also liked, how to write a thesis or dissertation introduction, thesis & dissertation acknowledgements | tips & examples, dissertation title page.

How to Write an Abstract in Research Papers (with Examples)

An abstract in research papers is a keyword-rich summary usually not exceeding 200-350 words. It can be considered the “face” of research papers because it creates an initial impression on the readers. While searching databases (such as PubMed) for research papers, a title is usually the first selection criterion for readers. If the title matches their search criteria, then the readers read the abstract, which sets the tone of the paper. Titles and abstracts are often the only freely available parts of research papers on journal websites. The pdf versions of full articles need to be purchased. Journal reviewers are often provided with only the title and abstract before they agree to review the complete paper. [ 1]  

Abstracts in research papers provide readers with a quick insight into what the paper is about to help them decide whether they want to read it further or not. Abstracts are the main selling points of articles and therefore should be carefully drafted, accurately highlighting the important aspects. [ 2]  

This article will help you identify the important components and provide tips on how to write an abstract in research papers effectively

What is an Abstract?  

An abstract in research papers can be defined as a synopsis of the paper. It should be clear, direct, self-contained, specific, unbiased, and concise. These summaries are published along with the complete research paper and are also submitted to conferences for consideration for presentation.  

Abstracts are of four types and journals can follow any of these formats: [ 2]  

• Structured  
• Unstructured  
• Descriptive  
• Informative  

Structured abstracts are used by most journals because they are more organized and have clear sections, usually including introduction/background; objective; design, settings, and participants (or materials and methods); outcomes and measures; results; and conclusion. These headings may differ based on the journal or the type of paper. Clinical trial abstracts should include the essential items mentioned in the CONSORT (Consolidated Standards Of Reporting Trials) guidelines.  

Figure 1. Structured abstract example [3] 

Unstructured abstracts are common in social science, humanities, and physical science journals. They usually have one paragraph and no specific structure or subheadings. These abstracts are commonly used for research papers that don’t report original work and therefore have a more flexible and narrative style.  

Figure 2. Unstructured abstract example [3] 

Descriptive abstracts are short (75–150 words) and provide an outline with only the most important points of research papers. They are used for shorter articles such as case reports, reviews, and opinions where space is at a premium, and rarely for original investigations. These abstracts don’t present the results but mainly list the topics covered.  

Here’s a sample abstract . [ 4]  

“Design of a Radio-Based System for Distribution Automation”  

A new survey by the Maryland Public Utilities Commission suggests that utilities have not effectively explained to consumers the benefits of smart meters. The two-year study of 86,000 consumers concludes that the long-term benefits of smart meters will not be realized until consumers understand the benefits of shifting some of their power usage to off-peak hours in response to the data they receive from their meters. The study presents recommendations for utilities and municipal governments to improve customer understanding of how to use the smart meters effectively.  

Keywords: smart meters, distribution systems, load, customer attitudes, power consumption, utilities  

Informative abstracts (structured or unstructured) give a complete detailed summary, including the main results, of the research paper and may or may not have subsections.   

Figure 3. Informative abstract example [5] 

Purpose of Abstracts in Research    

Abstracts in research have two main purposes—selection and indexing. [ 6,7]  

• Selection : Abstracts allow interested readers to quickly decide the relevance of a paper to gauge if they should read it completely.   
• Indexing : Most academic journal databases accessed through libraries enable you to search abstracts, allowing for quick retrieval of relevant articles and avoiding unnecessary search results. Therefore, abstracts must necessarily include the keywords that researchers may use to search for articles.  

Thus, a well-written, keyword-rich abstract can p ique readers’ interest and curiosity and help them decide whether they want to read the complete paper. It can also direct readers to articles of potential clinical and research interest during an online search.  

Contents of Abstracts in Research  

Abstracts in research papers summarize the main points of an article and are broadly categorized into four or five sections. Here are some details on how to write an abstract .   

Introduction/Background and/or Objectives  

This section should provide the following information:  

• What is already known about the subject?  
• What is not known about the subject or what does the study aim to investigate?  

The hypothesis or research question and objectives should be mentioned here. The Background sets the context for the rest of the paper and its length should be short so that the word count could be saved for the Results or other information directly pertaining to the study. The objective should be written in present or past simple tense.  

Examples:  

The antidepressant efficacy of desvenlafaxine (DV) has been established in 8-week, randomized controlled trials. The present study examined the continued efficacy of DV across 6 months of maintenance treatment . [ 1]  

Objective: To describe gastric and breast cancer risk estimates for individuals with CDH1 variants.  

Design, Setting, and Participants (or Materials and Methods)  

This section should provide information on the processes used and should be written in past simple tense because the process is already completed.  

A few important questions to be answered include:  

• What was the research design and setting?  
• What was the sample size and how were the participants sampled?  
• What treatments did the participants receive?  
• What were the data collection and data analysis dates?  
• What was the primary outcome measure?  

Hazard ratios (HRs) were estimated for each cancer type and used to calculate cumulative risks and risks per decade of life up to age 80 years.  

This section, written in either present or past simple tense, should be the longest and should describe the main findings of the study. Here’s an example of how descriptive the sentences should be:  

Avoid: Response rates differed significantly between diabetic and nondiabetic patients.  

Better: The response rate was higher in nondiabetic than in diabetic patients (49% vs 30%, respectively; P<0.01).  

This section should include the following information:  

• Total number of patients (included, excluded [exclusion criteria])  
• Primary and secondary outcomes, expressed in words, and supported by numerical data  
• Data on adverse outcomes  

Example: [ 8]  

In total, 10.9% of students were reported to have favorable study skills. The minimum score was found for preparation for examination domain. Also, a significantly positive correlation was observed between students’ study skills and their Grade Point Average (GPA) of previous term (P=0.001, r=0.269) and satisfaction with study skills (P=0.001, r=0.493).  

Conclusions  

Here, authors should mention the importance of their findings and also the practical and theoretical implications, which would benefit readers referring to this paper for their own research. Present simple tense should be used here.  

Examples: [ 1,8]  

The 9.3% prevalence of bipolar spectrum disorders in students at an arts university is substantially higher than general population estimates. These findings strengthen the oft-expressed hypothesis linking creativity with affective psychopathology.  

The findings indicated that students’ study skills need to be improved. Given the significant relationship between study skills and GPA, as an index of academic achievement, and satisfaction, it is necessary to promote the students’ study skills. These skills are suggested to be reinforced, with more emphasis on weaker domains.  

When to Write an Abstract  

In addition to knowing how to write an abstract , you should also know when to write an abstract . It’s best to write abstracts once the paper is completed because this would make it easier for authors to extract relevant parts from every section.  

Abstracts are usually required for: [ 7]    

• submitting articles to journals  
• applying for research grants   
• writing book proposals  
• completing and submitting dissertations  
• submitting proposals for conference papers  

Mostly, the author of the entire work writes the abstract (the first author, in works with multiple authors). However, there are professional abstracting services that hire writers to draft abstracts of other people’s work.   

How to Write an Abstract (Step-by-Step Process)  

Here are some key steps on how to write an abstract in research papers: [ 9]  

• Write the abstract after you’ve finished writing your paper.  
• Select the major objectives/hypotheses and conclusions from your Introduction and Conclusion sections.  
• Select key sentences from your Methods section.  
• Identify the major results from the Results section.  
• Paraphrase or re-write the sentences selected in steps 2, 3, and 4 in your own words into one or two paragraphs in the following sequence: Introduction/Objective, Methods, Results, and Conclusions. The headings may differ among journals, but the content remains the same.  
• Ensure that this draft does not contain: a.   new information that is not present in the paper b.   undefined abbreviations c.   a discussion of previous literature or reference citations d.   unnecessary details about the methods used  
• Remove all extra information and connect your sentences to ensure that the information flows well, preferably in the following order: purpose; basic study design, methodology and techniques used; major findings; summary of your interpretations, conclusions, and implications. Use section headings for structured abstracts.  
• Ensure consistency between the information presented in the abstract and the paper.  
• Check to see if the final abstract meets the guidelines of the target journal (word limit, type of abstract, recommended subheadings, etc.) and if all the required information has been included.  

Choosing Keywords for Abstracts  

Keywords [ 2] are the important and repeatedly used words and phrases in research papers and can help indexers and search engines find papers relevant to your requirements. Easy retrieval would help in reaching a wider audience and eventually gain more citations. In the fields of medicine and health, keywords should preferably be chosen from the Medical Subject Headings (MeSH) list of the US National Library of Medicine because they are used for indexing. These keywords need to be different from the words in the main title (automatically used for indexing) but can be variants of the terms/phrases used in the title, abstract, and the main text. Keywords should represent the content of your manuscript and be specific to your subject area.  

Basic tips for authors [ 10,11]  

• Read through your paper and highlight key terms or phrases that are most relevant and frequently used in your field, to ensure familiarity.  
• Several journals provide instructions about the length (eg, 3 words in a keyword) and maximum number of keywords allowed and other related rules. Create a list of keywords based on these instructions and include specific phrases containing 2 to 4 words. A longer string of words would yield generic results irrelevant to your field.  
• Use abbreviations, acronyms, and initializations if these would be more familiar.  
• Search with your keywords to ensure the results fit with your article and assess how helpful they would be to readers.  
• Narrow down your keywords to about five to ten, to ensure accuracy.  
• Finalize your list based on the maximum number allowed.  

  Few examples: [ 12]  

Important Tips for Writing an Abstract  

Here are a few tips on how to write an abstract to ensure that your abstract is complete, concise, and accurate. [ 1,2]  

• Write the abstract last.  
• Follow journal-specific formatting guidelines or Instructions to Authors strictly to ensure acceptance for publication.  
• Proofread the final draft meticulously to avoid grammatical or typographical errors.  
• Ensure that the terms or data mentioned in the abstract are consistent with the main text.  
• Include appropriate keywords at the end.

Do not include:  

• New information  
• Text citations to references  
• Citations to tables and figures  
• Generic statements  
• Abbreviations unless necessary, like a trial or study name  

Key Takeaways    

Here’s a quick snapshot of all the important aspects of how to write an abstract . [2]

• An abstract in research is a summary of the paper and describes only the main aspects. Typically, abstracts are about 200-350 words long.  
• Abstracts are of four types—structured, unstructured, descriptive, and informative.  
• Abstracts should be simple, clear, concise, independent, and unbiased (present both favorable and adverse outcomes).  
• They should adhere to the prescribed journal format, including word limits, section headings, number of keywords, fonts used, etc.  
• The terminology should be consistent with the main text.   
• Although the section heading names may differ for journals, every abstract should include a background and objective, analysis methods, primary results, and conclusions.  
• Nonstandard abbreviations, references, and URLs shouldn’t be included.  
• Only relevant and specific keywords should be used to ensure focused searches and higher citation frequency.  
• Abstracts should be written last after completing the main paper.  

Frequently Asked Questions   

Q1. Do all journals have different guidelines for abstracts?  

A1. Yes, all journals have their own specific guidelines for writing abstracts; a few examples are given in the following table. [ 6,13,14,15]  

Q2. What are the common mistakes to avoid when writing an abstract?  

A2. Listed below are a few mistakes that authors may make inadvertently while writing abstracts.  

• Copying sentences from the paper verbatim  

An abstract is a summary, which should be created by paraphrasing your own work or writing in your own words. Extracting sentences from every section and combining them into one paragraph cannot be considered summarizing.  

• Not adhering to the formatting guidelines  

Journals have special instructions for writing abstracts, such as word limits and section headings. These should be followed strictly to avoid rejections.  

• Not including the right amount of details in every section  

Both too little and too much information could discourage readers. For instance, if the Background has very little information, the readers may not get sufficient context to appreciate your research. Similarly, incomplete information in the Methods and a text-heavy Results section without supporting numerical data may affect the credibility of your research.  

• Including citations, standard abbreviations, and detailed measurements  

Typically, abstracts shouldn’t include these elements—citations, URLs, and abbreviations. Only nonstandard abbreviations are allowed or those that would be more familiar to readers than the expansions.  

• Including new information  

Abstracts should strictly include only the same information mentioned in the main text. Any new information should first be added to the text and then to the abstract only if necessary or if permitted by the word limit.  

• Not including keywords  

Keywords are essential for indexing and searching and should be included to increase the frequency of retrieval and citation.  

Q3. What is the difference between abstracts in research papers and conference abstracts? [16]  

A3. The table summarizes the main differences between research and conference abstracts.  

  Thus, abstracts are essential “trailers” that can market your research to a wide audience. The better and more complete the abstract the more are the chances of your paper being read and cited. By following our checklist and ensuring that all key elements are included, you can create a well-structured abstract that summarizes your paper accurately.  

References  

• Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry . 2011; 53(2):172-175. Accessed June 14, 2024. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC3136027/  
• Tullu MS. Writing the title and abstract for a research paper: Being concise, precise, and meticulous is the key. 2019; 13(Suppl 1): S12-S17. Accessed June 14, 2024. https://www.ncbi.nlm.nih.gov/pmc/articles/PMC6398294/  
• Zawia J. Writing an Academic Paper? Get to know Abstracts vs. Structured Abstracts. Medium. Published October 16, 2023. Accessed June 16, 2024. https://medium.com/@jamala.zawia/writing-an-academic-paper-get-to-know-abstracts-vs-structured-abstracts-11ed86888367  
• Markel M and Selber S. Technical Communication, 12 th edition. 2018; pp. 482. Bedford/St Martin’s.  
• Abstracts. Arkansas State University. Accessed June 17, 2024. https://www.astate.edu/a/global-initiatives/online/a-state-online-services/online-writing-center/resources/How%20to%20Write%20an%20Abstract1.pdf  
• AMA Manual of Style. 11 th edition. Oxford University Press.  
• Writing an Abstract. The University of Melbourne. Accessed June 16, 2024. https://services.unimelb.edu.au/__data/assets/pdf_file/0007/471274/Writing_an_Abstract_Update_051112.pdf  
• 10 Good Abstract Examples that will Kickstart Your Brain. Kibin Essay Writing Blog. Published April 5, 2017. Accessed June 17, 2024. https://www.kibin.com/essay-writing-blog/10-good-abstract-examples/  
• A 10-step guide to make your research paper abstract more effective. Editage Insights. Published October 16, 2013. Accessed June 17, 2024. https://www.editage.com/insights/a-10-step-guide-to-make-your-research-paper-abstract-more-effective  
• Using keywords to write your title and abstract. Taylor & Francis Author Services. Accessed June 15, 2024. https://authorservices.taylorandfrancis.com/publishing-your-research/writing-your-paper/using-keywords-to-write-title-and-abstract/  
• How to choose and use keywords in research papers. Paperpal by Editage blog. Published March 10, 2023. Accessed June 17, 2024. https://paperpal.com/blog/researcher-resources/phd-pointers/how-to-choose-and-use-keywords-in-research-papers  
• Title, abstract and keywords. Springer. Accessed June 16, 2024. https://www.springer.com/it/authors-editors/authorandreviewertutorials/writing-a-journal-manuscript/title-abstract-and-keywords/10285522  
• Abstract and keywords guide. APA Style, 7 th edition. Accessed June 18, 2024. https://apastyle.apa.org/instructional-aids/abstract-keywords-guide.pdf  
• Abstract guidelines. American Society for Microbiology. Accessed June 18, 2024. https://asm.org/events/asm-microbe/present/abstract-guidelines  
• Guidelines for conference abstracts. The Lancet. Accessed June 16, 2024. https://www.thelancet.com/pb/assets/raw/Lancet/pdfs/Abstract_Guidelines_2013.pdf  
• Is a conference abstract the same as a paper abstract? Global Conference Alliance, Inc. Accessed June 18, 2024. https://globalconference.ca/is-a-conference-abstract-the-same-as-a-paper-abstract/  

Paperpal is a comprehensive AI writing toolkit that helps students and researchers achieve 2x the writing in half the time. It leverages 21+ years of STM experience and insights from millions of research articles to provide in-depth academic writing, language editing, and submission readiness support to help you write better, faster.  

Get accurate academic translations, rewriting support, grammar checks, vocabulary suggestions, and generative AI assistance that delivers human precision at machine speed. Try for free or upgrade to Paperpal Prime starting at US$19 a month to access premium features, including consistency, plagiarism, and 30+ submission readiness checks to help you succeed.  

Experience the future of academic writing – Sign up to Paperpal and start writing for free!  

Related Reads:

• What are Journal Guidelines on Using Generative AI Tools
• How to Write a High-Quality Conference Paper

How to Write Dissertation Acknowledgements?

• How to Write the First Draft of a Research Paper with Paperpal? 

Top 7 AI Tools for Research 2024

You may also like, dissertation printing and binding | types & comparison , what is a dissertation preface definition and examples , how to write a research proposal: (with examples..., how to write your research paper in apa..., how to choose a dissertation topic, how to write a phd research proposal, how to write an academic paragraph (step-by-step guide), maintaining academic integrity with paperpal’s generative ai writing..., research funding basics: what should a grant proposal....

What this handout is about

This handout provides definitions and examples of the two main types of abstracts: descriptive and informative. It also provides guidelines for constructing an abstract and general tips for you to keep in mind when drafting. Finally, it includes a few examples of abstracts broken down into their component parts.

What is an abstract?

An abstract is a self-contained, short, and powerful statement that describes a larger work. Components vary according to discipline. An abstract of a social science or scientific work may contain the scope, purpose, results, and contents of the work. An abstract of a humanities work may contain the thesis, background, and conclusion of the larger work. An abstract is not a review, nor does it evaluate the work being abstracted. While it contains key words found in the larger work, the abstract is an original document rather than an excerpted passage.

Why write an abstract?

You may write an abstract for various reasons. The two most important are selection and indexing. Abstracts allow readers who may be interested in a longer work to quickly decide whether it is worth their time to read it. Also, many online databases use abstracts to index larger works. Therefore, abstracts should contain keywords and phrases that allow for easy searching.

Say you are beginning a research project on how Brazilian newspapers helped Brazil’s ultra-liberal president Luiz Ignácio da Silva wrest power from the traditional, conservative power base. A good first place to start your research is to search Dissertation Abstracts International for all dissertations that deal with the interaction between newspapers and politics. “Newspapers and politics” returned 569 hits. A more selective search of “newspapers and Brazil” returned 22 hits. That is still a fair number of dissertations. Titles can sometimes help winnow the field, but many titles are not very descriptive. For example, one dissertation is titled “Rhetoric and Riot in Rio de Janeiro.” It is unclear from the title what this dissertation has to do with newspapers in Brazil. One option would be to download or order the entire dissertation on the chance that it might speak specifically to the topic. A better option is to read the abstract. In this case, the abstract reveals the main focus of the dissertation:

This dissertation examines the role of newspaper editors in the political turmoil and strife that characterized late First Empire Rio de Janeiro (1827-1831). Newspaper editors and their journals helped change the political culture of late First Empire Rio de Janeiro by involving the people in the discussion of state. This change in political culture is apparent in Emperor Pedro I’s gradual loss of control over the mechanisms of power. As the newspapers became more numerous and powerful, the Emperor lost his legitimacy in the eyes of the people. To explore the role of the newspapers in the political events of the late First Empire, this dissertation analyzes all available newspapers published in Rio de Janeiro from 1827 to 1831. Newspapers and their editors were leading forces in the effort to remove power from the hands of the ruling elite and place it under the control of the people. In the process, newspapers helped change how politics operated in the constitutional monarchy of Brazil.

From this abstract you now know that although the dissertation has nothing to do with modern Brazilian politics, it does cover the role of newspapers in changing traditional mechanisms of power. After reading the abstract, you can make an informed judgment about whether the dissertation would be worthwhile to read.

Besides selection, the other main purpose of the abstract is for indexing. Most article databases in the online catalog of the library enable you to search abstracts. This allows for quick retrieval by users and limits the extraneous items recalled by a “full-text” search. However, for an abstract to be useful in an online retrieval system, it must incorporate the key terms that a potential researcher would use to search. For example, if you search Dissertation Abstracts International using the keywords “France” “revolution” and “politics,” the search engine would search through all the abstracts in the database that included those three words. Without an abstract, the search engine would be forced to search titles, which, as we have seen, may not be fruitful, or else search the full text. It’s likely that a lot more than 60 dissertations have been written with those three words somewhere in the body of the entire work. By incorporating keywords into the abstract, the author emphasizes the central topics of the work and gives prospective readers enough information to make an informed judgment about the applicability of the work.

When do people write abstracts?

• when submitting articles to journals, especially online journals
• when applying for research grants
• when writing a book proposal
• when completing the Ph.D. dissertation or M.A. thesis
• when writing a proposal for a conference paper
• when writing a proposal for a book chapter

Most often, the author of the entire work (or prospective work) writes the abstract. However, there are professional abstracting services that hire writers to draft abstracts of other people’s work. In a work with multiple authors, the first author usually writes the abstract. Undergraduates are sometimes asked to draft abstracts of books/articles for classmates who have not read the larger work.

Types of abstracts

There are two types of abstracts: descriptive and informative. They have different aims, so as a consequence they have different components and styles. There is also a third type called critical, but it is rarely used. If you want to find out more about writing a critique or a review of a work, see the UNC Writing Center handout on writing a literature review . If you are unsure which type of abstract you should write, ask your instructor (if the abstract is for a class) or read other abstracts in your field or in the journal where you are submitting your article.

Descriptive abstracts

A descriptive abstract indicates the type of information found in the work. It makes no judgments about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract describes the work being abstracted. Some people consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short—100 words or less.

Informative abstracts

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the writer presents and explains all the main arguments and the important results and evidence in the complete article/paper/book. An informative abstract includes the information that can be found in a descriptive abstract (purpose, methods, scope) but also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is rarely more than 10% of the length of the entire work. In the case of a longer work, it may be much less.

Here are examples of a descriptive and an informative abstract of this handout on abstracts . Descriptive abstract:

The two most common abstract types—descriptive and informative—are described and examples of each are provided.

Informative abstract:

Abstracts present the essential elements of a longer work in a short and powerful statement. The purpose of an abstract is to provide prospective readers the opportunity to judge the relevance of the longer work to their projects. Abstracts also include the key terms found in the longer work and the purpose and methods of the research. Authors abstract various longer works, including book proposals, dissertations, and online journal articles. There are two main types of abstracts: descriptive and informative. A descriptive abstract briefly describes the longer work, while an informative abstract presents all the main arguments and important results. This handout provides examples of various types of abstracts and instructions on how to construct one.

Which type should I use?

Your best bet in this case is to ask your instructor or refer to the instructions provided by the publisher. You can also make a guess based on the length allowed; i.e., 100-120 words = descriptive; 250+ words = informative.

How do I write an abstract?

The format of your abstract will depend on the work being abstracted. An abstract of a scientific research paper will contain elements not found in an abstract of a literature article, and vice versa. However, all abstracts share several mandatory components, and there are also some optional parts that you can decide to include or not. When preparing to draft your abstract, keep the following key process elements in mind:

• Reason for writing: What is the importance of the research? Why would a reader be interested in the larger work?
• Problem: What problem does this work attempt to solve? What is the scope of the project? What is the main argument/thesis/claim?
• Methodology: An abstract of a scientific work may include specific models or approaches used in the larger study. Other abstracts may describe the types of evidence used in the research.
• Results: Again, an abstract of a scientific work may include specific data that indicates the results of the project. Other abstracts may discuss the findings in a more general way.
• Implications: What changes should be implemented as a result of the findings of the work? How does this work add to the body of knowledge on the topic?

(This list of elements is adapted with permission from Philip Koopman, “How to Write an Abstract.” )

All abstracts include:

• A full citation of the source, preceding the abstract.
• The most important information first.
• The same type and style of language found in the original, including technical language.
• Key words and phrases that quickly identify the content and focus of the work.
• Clear, concise, and powerful language.

Abstracts may include:

• The thesis of the work, usually in the first sentence.
• Background information that places the work in the larger body of literature.
• The same chronological structure as the original work.

How not to write an abstract:

• Do not refer extensively to other works.
• Do not add information not contained in the original work.
• Do not define terms.

If you are abstracting your own writing

When abstracting your own work, it may be difficult to condense a piece of writing that you have agonized over for weeks (or months, or even years) into a 250-word statement. There are some tricks that you could use to make it easier, however.

Reverse outlining:

This technique is commonly used when you are having trouble organizing your own writing. The process involves writing down the main idea of each paragraph on a separate piece of paper– see our short video . For the purposes of writing an abstract, try grouping the main ideas of each section of the paper into a single sentence. Practice grouping ideas using webbing or color coding .

For a scientific paper, you may have sections titled Purpose, Methods, Results, and Discussion. Each one of these sections will be longer than one paragraph, but each is grouped around a central idea. Use reverse outlining to discover the central idea in each section and then distill these ideas into one statement.

Cut and paste:

To create a first draft of an abstract of your own work, you can read through the entire paper and cut and paste sentences that capture key passages. This technique is useful for social science research with findings that cannot be encapsulated by neat numbers or concrete results. A well-written humanities draft will have a clear and direct thesis statement and informative topic sentences for paragraphs or sections. Isolate these sentences in a separate document and work on revising them into a unified paragraph.

If you are abstracting someone else’s writing

When abstracting something you have not written, you cannot summarize key ideas just by cutting and pasting. Instead, you must determine what a prospective reader would want to know about the work. There are a few techniques that will help you in this process:

Identify key terms:

Search through the entire document for key terms that identify the purpose, scope, and methods of the work. Pay close attention to the Introduction (or Purpose) and the Conclusion (or Discussion). These sections should contain all the main ideas and key terms in the paper. When writing the abstract, be sure to incorporate the key terms.

Highlight key phrases and sentences:

Instead of cutting and pasting the actual words, try highlighting sentences or phrases that appear to be central to the work. Then, in a separate document, rewrite the sentences and phrases in your own words.

Don’t look back:

After reading the entire work, put it aside and write a paragraph about the work without referring to it. In the first draft, you may not remember all the key terms or the results, but you will remember what the main point of the work was. Remember not to include any information you did not get from the work being abstracted.

Revise, revise, revise

No matter what type of abstract you are writing, or whether you are abstracting your own work or someone else’s, the most important step in writing an abstract is to revise early and often. When revising, delete all extraneous words and incorporate meaningful and powerful words. The idea is to be as clear and complete as possible in the shortest possible amount of space. The Word Count feature of Microsoft Word can help you keep track of how long your abstract is and help you hit your target length.

Example 1: Humanities abstract

Kenneth Tait Andrews, “‘Freedom is a constant struggle’: The dynamics and consequences of the Mississippi Civil Rights Movement, 1960-1984” Ph.D. State University of New York at Stony Brook, 1997 DAI-A 59/02, p. 620, Aug 1998

This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so. The time period studied includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies. Data have been collected from archives, interviews, newspapers, and published reports. This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Now let’s break down this abstract into its component parts to see how the author has distilled his entire dissertation into a ~200 word abstract.

What the dissertation does This dissertation examines the impacts of social movements through a multi-layered study of the Mississippi Civil Rights Movement from its peak in the early 1960s through the early 1980s. By examining this historically important case, I clarify the process by which movements transform social structures and the constraints movements face when they try to do so.

How the dissertation does it The time period studied in this dissertation includes the expansion of voting rights and gains in black political power, the desegregation of public schools and the emergence of white-flight academies, and the rise and fall of federal anti-poverty programs. I use two major research strategies: (1) a quantitative analysis of county-level data and (2) three case studies.

What materials are used Data have been collected from archives, interviews, newspapers, and published reports.

Conclusion This dissertation challenges the argument that movements are inconsequential. Some view federal agencies, courts, political parties, or economic elites as the agents driving institutional change, but typically these groups acted in response to movement demands and the leverage brought to bear by the civil rights movement. The Mississippi movement attempted to forge independent structures for sustaining challenges to local inequities and injustices. By propelling change in an array of local institutions, movement infrastructures had an enduring legacy in Mississippi.

Keywords social movements Civil Rights Movement Mississippi voting rights desegregation

Example 2: Science Abstract

Luis Lehner, “Gravitational radiation from black hole spacetimes” Ph.D. University of Pittsburgh, 1998 DAI-B 59/06, p. 2797, Dec 1998

The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search for and analysis of detected signals. The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm. This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

This science abstract covers much of the same ground as the humanities one, but it asks slightly different questions.

Why do this study The problem of detecting gravitational radiation is receiving considerable attention with the construction of new detectors in the United States, Europe, and Japan. The theoretical modeling of the wave forms that would be produced in particular systems will expedite the search and analysis of the detected signals.

What the study does The characteristic formulation of GR is implemented to obtain an algorithm capable of evolving black holes in 3D asymptotically flat spacetimes. Using compactification techniques, future null infinity is included in the evolved region, which enables the unambiguous calculation of the radiation produced by some compact source. A module to calculate the waveforms is constructed and included in the evolution algorithm.

Results This code is shown to be second-order convergent and to handle highly non-linear spacetimes. In particular, we have shown that the code can handle spacetimes whose radiation is equivalent to a galaxy converting its whole mass into gravitational radiation in one second. We further use the characteristic formulation to treat the region close to the singularity in black hole spacetimes. The code carefully excises a region surrounding the singularity and accurately evolves generic black hole spacetimes with apparently unlimited stability.

Keywords gravitational radiation (GR) spacetimes black holes

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

Belcher, Wendy Laura. 2009. Writing Your Journal Article in Twelve Weeks: A Guide to Academic Publishing Success. Thousand Oaks, CA: Sage Press.

Koopman, Philip. 1997. “How to Write an Abstract.” Carnegie Mellon University. October 1997. http://users.ece.cmu.edu/~koopman/essays/abstract.html .

Lancaster, F.W. 2003. Indexing And Abstracting in Theory and Practice , 3rd ed. London: Facet Publishing.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

Make a Gift

• Affiliate Program

• UNITED STATES
• 台灣 (TAIWAN)
• TÜRKIYE (TURKEY)
• Academic Editing Services
• - Research Paper
• - Journal Manuscript
• - Dissertation
• - College & University Assignments
• Admissions Editing Services
• - Application Essay
• - Personal Statement
• - Recommendation Letter
• - Cover Letter
• - CV/Resume
• Business Editing Services
• - Business Documents
• - Report & Brochure
• - Website & Blog
• Writer Editing Services
• - Script & Screenplay
• Our Editors
• Client Reviews
• Editing & Proofreading Prices
• Wordvice Points
• Partner Discount
• Plagiarism Checker
• APA Citation Generator
• MLA Citation Generator
• Chicago Citation Generator
• Vancouver Citation Generator
• - APA Style
• - MLA Style
• - Chicago Style
• - Vancouver Style
• Writing & Editing Guide
• Academic Resources
• Admissions Resources

How to Write an Abstract for a Research Paper | Examples

What is a research paper abstract?

Research paper abstracts summarize your study quickly and succinctly to journal editors and researchers and prompt them to read further. But with the ubiquity of online publication databases, writing a compelling abstract is even more important today than it was in the days of bound paper manuscripts.

Abstracts exist to “sell”  your work, and they could thus be compared to the “executive summary” of a business resume: an official briefing on what is most important about your research. Or the “gist” of your research. With the majority of academic transactions being conducted online, this means that you have even less time to impress readers–and increased competition in terms of other abstracts out there to read.

The APCI (Academic Publishing and Conferences International) notes that there are  12 questions or “points” considered in the selection process  for journals and conferences and stresses the importance of having an abstract that ticks all of these boxes. Because it is often the ONLY chance you have to convince readers to keep reading, it is important that you spend time and energy crafting an abstract that faithfully represents the central parts of your study and captivates your audience.

With that in mind, follow these suggestions when structuring and writing your abstract, and learn how exactly to put these ideas into a solid abstract that will captivate your target readers.

Before Writing Your Abstract

How long should an abstract be.

All abstracts are written with the same essential objective: to give a summary of your study. But there are two basic styles of abstract: descriptive and informative . Here is a brief delineation of the two:

Of the two types of abstracts, informative abstracts are much more common, and they are widely used for submission to journals and conferences. Informative abstracts apply to lengthier and more technical research and are common in the sciences, engineering, and psychology, while descriptive abstracts are more likely used in humanities and social science papers. The best method of determining which abstract type you need to use is to follow the instructions for journal submissions and to read as many other published articles in those journals as possible.

Research Abstract Guidelines and Requirements

As any article about research writing will tell you, authors must always closely follow the specific guidelines and requirements indicated in the Guide for Authors section of their target journal’s website. The same kind of adherence to conventions should be applied to journal publications, for consideration at a conference, and even when completing a class assignment.

Each publisher has particular demands when it comes to formatting and structure. Here are some common questions addressed in the journal guidelines:

• Is there a maximum or minimum word/character length?
• What are the style and formatting requirements?
• What is the appropriate abstract type?
• Are there any specific content or organization rules that apply?

There are of course other rules to consider when composing a research paper abstract. But if you follow the stated rules the first time you submit your manuscript, you can avoid your work being thrown in the “circular file” right off the bat.

Identify Your Target Readership

The main purpose of your abstract is to lead researchers to the full text of your research paper. In scientific journals, abstracts let readers decide whether the research discussed is relevant to their own interests or study. Abstracts also help readers understand your main argument quickly. Consider these questions as you write your abstract:

• Are other academics in your field the main target of your study?
• Will your study perhaps be useful to members of the general public?
• Do your study results include the wider implications presented in the abstract?

Outlining and Writing Your Abstract

What to include in an abstract.

Just as your  research paper title  should cover as much ground as possible in a few short words, your abstract must cover  all  parts of your study in order to fully explain your paper and research. Because it must accomplish this task in the space of only a few hundred words, it is important not to include ambiguous references or phrases that will confuse the reader or mislead them about the content and objectives of your research. Follow these  dos  and  don’ts  when it comes to what kind of writing to include:

• Avoid acronyms or abbreviations since these will need to be explained in order to make sense to the reader, which takes up valuable abstract space. Instead, explain these terms in the Introduction section of the main text.
• Only use references to people or other works if they are well-known. Otherwise, avoid referencing anything outside of your study in the abstract.
• Never include tables, figures, sources, or long quotations in your abstract; you will have plenty of time to present and refer to these in the body of your paper.

Use keywords in your abstract to focus your topic

A vital search tool is the research paper keywords section, which lists the most relevant terms directly underneath the abstract. Think of these keywords as the “tubes” that readers will seek and enter—via queries on databases and search engines—to ultimately land at their destination, which is your paper. Your abstract keywords should thus be words that are commonly used in searches but should also be highly relevant to your work and found in the text of your abstract. Include 5 to 10 important words or short phrases central to your research in both the abstract and the keywords section.

For example, if you are writing a paper on the prevalence of obesity among lower classes that crosses international boundaries, you should include terms like “obesity,” “prevalence,” “international,” “lower classes,” and “cross-cultural.” These are terms that should net a wide array of people interested in your topic of study. Look at our nine rules for choosing keywords for your research paper if you need more input on this.

Research Paper Abstract Structure

As mentioned above, the abstract (especially the informative abstract) acts as a surrogate or synopsis of your research paper, doing almost as much work as the thousands of words that follow it in the body of the main text. In the hard sciences and most social sciences, the abstract includes the following sections and organizational schema.

Each section is quite compact—only a single sentence or two, although there is room for expansion if one element or statement is particularly interesting or compelling. As the abstract is almost always one long paragraph, the individual sections should naturally merge into one another to create a holistic effect. Use the following as a checklist to ensure that you have included all of the necessary content in your abstract.

1) Identify your purpose and motivation

So your research is about rabies in Brazilian squirrels. Why is this important? You should start your abstract by explaining why people should care about this study—why is it significant to your field and perhaps to the wider world? And what is the exact purpose of your study; what are you trying to achieve? Start by answering the following questions:

• What made you decide to do this study or project?
• Why is this study important to your field or to the lay reader?
• Why should someone read your entire article?

In summary, the first section of your abstract should include the importance of the research and its impact on related research fields or on the wider scientific domain.

2) Explain the research problem you are addressing

Stating the research problem that your study addresses is the corollary to why your specific study is important and necessary. For instance, even if the issue of “rabies in Brazilian squirrels” is important, what is the problem—the “missing piece of the puzzle”—that your study helps resolve?

You can combine the problem with the motivation section, but from a perspective of organization and clarity, it is best to separate the two. Here are some precise questions to address:

• What is your research trying to better understand or what problem is it trying to solve?
• What is the scope of your study—does it try to explain something general or specific?
• What is your central claim or argument?

3) Discuss your research approach

Your specific study approach is detailed in the Methods and Materials section .  You have already established the importance of the research, your motivation for studying this issue, and the specific problem your paper addresses. Now you need to discuss  how  you solved or made progress on this problem—how you conducted your research. If your study includes your own work or that of your team, describe that here. If in your paper you reviewed the work of others, explain this here. Did you use analytic models? A simulation? A double-blind study? A case study? You are basically showing the reader the internal engine of your research machine and how it functioned in the study. Be sure to:

• Detail your research—include methods/type of the study, your variables, and the extent of the work
• Briefly present evidence to support your claim
• Highlight your most important sources

4) Briefly summarize your results

Here you will give an overview of the outcome of your study. Avoid using too many vague qualitative terms (e.g, “very,” “small,” or “tremendous”) and try to use at least some quantitative terms (i.e., percentages, figures, numbers). Save your qualitative language for the conclusion statement. Answer questions like these:

• What did your study yield in concrete terms (e.g., trends, figures, correlation between phenomena)?
• How did your results compare to your hypothesis? Was the study successful?
• Where there any highly unexpected outcomes or were they all largely predicted?

5) State your conclusion

In the last section of your abstract, you will give a statement about the implications and  limitations of the study . Be sure to connect this statement closely to your results and not the area of study in general. Are the results of this study going to shake up the scientific world? Will they impact how people see “Brazilian squirrels”? Or are the implications minor? Try not to boast about your study or present its impact as  too  far-reaching, as researchers and journals will tend to be skeptical of bold claims in scientific papers. Answer one of these questions:

• What are the exact effects of these results on my field? On the wider world?
• What other kind of study would yield further solutions to problems?
• What other information is needed to expand knowledge in this area?

After Completing the First Draft of Your Abstract

Revise your abstract.

The abstract, like any piece of academic writing, should be revised before being considered complete. Check it for  grammatical and spelling errors  and make sure it is formatted properly.

Get feedback from a peer

Getting a fresh set of eyes to review your abstract is a great way to find out whether you’ve summarized your research well. Find a reader who understands research papers but is not an expert in this field or is not affiliated with your study. Ask your reader to summarize what your study is about (including all key points of each section). This should tell you if you have communicated your key points clearly.

In addition to research peers, consider consulting with a professor or even a specialist or generalist writing center consultant about your abstract. Use any resource that helps you see your work from another perspective.

Consider getting professional editing and proofreading

While peer feedback is quite important to ensure the effectiveness of your abstract content, it may be a good idea to find an academic editor  to fix mistakes in grammar, spelling, mechanics, style, or formatting. The presence of basic errors in the abstract may not affect your content, but it might dissuade someone from reading your entire study. Wordvice provides English editing services that both correct objective errors and enhance the readability and impact of your work.

Additional Abstract Rules and Guidelines

Write your abstract after completing your paper.

Although the abstract goes at the beginning of your manuscript, it does not merely introduce your research topic (that is the job of the title), but rather summarizes your entire paper. Writing the abstract last will ensure that it is complete and consistent with the findings and statements in your paper.

Keep your content in the correct order

Both questions and answers should be organized in a standard and familiar way to make the content easier for readers to absorb. Ideally, it should mimic the overall format of your essay and the classic “introduction,” “body,” and “conclusion” form, even if the parts are not neatly divided as such.

Write the abstract from scratch

Because the abstract is a self-contained piece of writing viewed separately from the body of the paper, you should write it separately as well. Never copy and paste direct quotes from the paper and avoid paraphrasing sentences in the paper. Using new vocabulary and phrases will keep your abstract interesting and free of redundancies while conserving space.

Don’t include too many details in the abstract

Again, the density of your abstract makes it incompatible with including specific points other than possibly names or locations. You can make references to terms, but do not explain or define them in the abstract. Try to strike a balance between being specific to your study and presenting a relatively broad overview of your work.

Wordvice Resources

If you think your abstract is fine now but you need input on abstract writing or require English editing services (including paper editing ), then head over to the Wordvice academic resources page, where you will find many more articles, for example on writing the Results , Methods , and Discussion sections of your manuscript, on choosing a title for your paper , or on how to finalize your journal submission with a strong cover letter .    

Academic & Employability Skills

Subscribe to academic & employability skills.

Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Email Address

Writing an abstract - a six point checklist (with samples)

Posted in: abstract , dissertations

The abstract is a vital part of any research paper. It is the shop front for your work, and the first stop for your reader. It should provide a clear and succinct summary of your study, and encourage your readers to read more. An effective abstract, therefore should answer the following questions:

• Why did you do this study or project?
• What did you do and how?
• What did you find?
• What do your findings mean?

So here's our run down of the key elements of a well-written abstract.

• Size - A succinct and well written abstract should be between approximately 100- 250 words.
• Background - An effective abstract usually includes some scene-setting information which might include what is already known about the subject, related to the paper in question (a few short sentences).
• Purpose  - The abstract should also set out the purpose of your research, in other words, what is not known about the subject and hence what the study intended to examine (or what the paper seeks to present).
• Methods - The methods section should contain enough information to enable the reader to understand what was done, and how. It should include brief details of the research design, sample size, duration of study, and so on.
• Results - The results section is the most important part of the abstract. This is because readers who skim an abstract do so to learn about the findings of the study. The results section should therefore contain as much detail about the findings as the journal word count permits.
• Conclusion - This section should contain the most important take-home message of the study, expressed in a few precisely worded sentences. Usually, the finding highlighted here relates to the primary outcomes of the study. However, other important or unexpected findings should also be mentioned. It is also customary, but not essential, to express an opinion about the theoretical or practical implications of the findings, or the importance of their findings for the field. Thus, the conclusions may contain three elements:
• The primary take-home message.
• Any additional findings of importance.
• Implications for future studies.

Example Abstract 2: Engineering Development and validation of a three-dimensional finite element model of the pelvic bone.

Abstract from: Dalstra, M., Huiskes, R. and Van Erning, L., 1995. Development and validation of a three-dimensional finite element model of the pelvic bone. Journal of biomechanical engineering, 117(3), pp.272-278.

And finally...  A word on abstract types and styles

Abstract types can differ according to subject discipline. You need to determine therefore which type of abstract you should include with your paper. Here are two of the most common types with examples.

Informative Abstract

The majority of abstracts are informative. While they still do not critique or evaluate a work, they do more than describe it. A good informative abstract acts as a surrogate for the work itself. That is, the researcher presents and explains all the main arguments and the important results and evidence in the paper. An informative abstract includes the information that can be found in a descriptive abstract [purpose, methods, scope] but it also includes the results and conclusions of the research and the recommendations of the author. The length varies according to discipline, but an informative abstract is usually no more than 300 words in length.

Descriptive Abstract A descriptive abstract indicates the type of information found in the work. It makes no judgements about the work, nor does it provide results or conclusions of the research. It does incorporate key words found in the text and may include the purpose, methods, and scope of the research. Essentially, the descriptive abstract only describes the work being summarised. Some researchers consider it an outline of the work, rather than a summary. Descriptive abstracts are usually very short, 100 words or less.

Adapted from Andrade C. How to write a good abstract for a scientific paper or conference presentation. Indian J Psychiatry. 2011 Apr;53(2):172-5. doi: 10.4103/0019-5545.82558. PMID: 21772657; PMCID: PMC3136027 .

Share this:

• Click to print (Opens in new window)
• Click to email a link to a friend (Opens in new window)
• Click to share on WhatsApp (Opens in new window)
• Click to share on LinkedIn (Opens in new window)
• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Click here to cancel reply.

• Email * (we won't publish this)

Write a response

Navigating the dissertation process: my tips for final years

Imagine for a moment... After months of hard work and research on a topic you're passionate about, the time has finally come to click the 'Submit' button on your dissertation. You've just completed your longest project to date as part...

8 ways to beat procrastination

Whether you’re writing an assignment or revising for exams, getting started can be hard. Fortunately, there’s lots you can do to turn procrastination into action.

My takeaways on how to write a scientific report

If you’re in your dissertation writing stage or your course includes writing a lot of scientific reports, but you don’t quite know where and how to start, the Skills Centre can help you get started. I recently attended their ‘How...

How to Write an Abstract for Your Paper

An abstract is a self-contained summary of a larger work, such as research and scientific papers or general academic papers . Usually situated at the beginning of such works, the abstract is meant to “preview” the bigger document. This helps readers and other researchers find what they’re looking for and understand the magnitude of what’s discussed. 

Like the trailer for a movie, an abstract can determine whether or not someone becomes interested in your work. Aside from enticing readers, abstracts are also useful organizational tools that help other researchers and academics find papers relevant to their work.  

Because of their specific requirements, it’s best to know a little about how to write an abstract before doing it. This guide explains the basics of writing an abstract for beginners, including what to put in them and some expert tips on writing them. 

Give your papers extra polish Grammarly helps you improve your academic writing Write with Grammarly

What’s the purpose of an abstract?

The main purpose of an abstract is to help people decide whether or not to read the entire academic paper. After all, titles can be misleading and don’t get into specifics like methodology or results. Imagine paying for and downloading a hundred-page dissertation on what you believe is relevant to your research on the Caucasus region—only to find out it’s about the other Georgia. 

Likewise, abstracts can encourage financial support for grant proposals and fundraising. If you lack the funding for your research, your proposal abstract would outline the costs and benefits of your project. This way, potential investors could make an informed decision, or jump to the relevant section of your proposal to see the details. 

Abstracts are also incredibly useful for indexing. They make it easier for researchers to find precisely what they need without wasting time skimming actual papers. And because abstracts sometimes touch on the results of a paper, researchers and students can see right away if the paper can be used as evidence or a citation to support their own theses. 

Nowadays, abstracts are also important for search engine optimization (SEO)—namely, for getting digital copies of your paper to appear in search engine results. If someone Googles the words used in your abstract, the link to your paper will appear higher in the search results, making it more likely to get clicks. 

How long should an abstract be? 

Abstracts are typically 100–250 words and comprise one or two paragraphs . However, more complex papers require more complex abstracts, so you may need to stretch it out to cover everything. It’s not uncommon to see abstracts that fill an entire page, especially in advanced scientific works. 

When do you need to write an abstract? 

Abstracts are only for lengthy, often complicated texts, as with scientific and research papers. Similar academic papers—including doctorate dissertations, master’s theses, or elaborate literary criticisms —may also demand them as well. If you’re learning how to write a thesis paper for college , you’ll want to know how to write an abstract, too. 

Specifically, most scientific journals and grant proposals require an abstract for submissions. Conference papers often involve them as well, as do book proposals and other fundraising endeavors. 

However, most writing, in particular casual and creative writing, doesn’t need an abstract. 

Types of abstracts

There are two main types of abstracts: informative and descriptive. Most abstracts fall into the informative category, with descriptive abstracts reserved for less formal papers. 

Informative abstracts

Informative abstracts discuss all the need-to-know details of your paper: purpose, method, scope, results, and conclusion. They’re the go-to format for scientific and research papers. 

Informative abstracts attempt to outline the entire paper without going into specifics. They’re written for quick reference, favor efficiency over style, and tend to lack personality. 

Descriptive abstracts

Descriptive abstracts are a little more personable and focus more on enticing readers. They don’t care as much for data and details, and instead read more like overviews that don’t give too much away. Think of descriptive abstracts like synopses on the back of a book. 

Because they don’t delve too deep, descriptive abstracts are shorter than informative abstracts, closer to 100 words, and in a single paragraph. In particular, they don’t cover areas like results or conclusions — you have to read the paper to satisfy your curiosity. 

Since they’re so informal, descriptive abstracts are more at home in artistic criticisms and entertaining papers than in scientific articles. 

What to include in an abstract

As part of a formal document, informative abstracts adhere to more scientific and data-based structures. Like the paper itself, abstracts should include all of the IMRaD elements: Introduction , Methods , Results , and Discussion . 

This handy acronym is a great way to remember what parts to include in your abstract. There are some other areas you might need as well, which we also explain at the end. 

Introduction

The beginning of your abstract should provide a broad overview of the entire project, just like the thesis statement. You can also use this section of your abstract to write out your hypothesis or research question. 

In the one or two sentences at the top, you want to disclose the purpose of your paper, such as what problem it attempts to solve and why the reader should be interested. You’ll also need to explain the context around it, including any historical references. 

This section covers the methodology of your research, or how you collected the data. This is crucial for verifying the credibility of your paper — abstracts with no methodology or suspicious methods won’t be taken seriously by the scientific community. 

If you’re using original research, you should disclose which analytical methods you used to collect your data, including descriptions of instruments, software, or participants. If you’re expounding on previous data, this is a good place to cite which data and from where to avoid plagiarism . 

For informative abstracts, it’s okay to “give away the ending.” In one or two sentences, summarize the results of your paper and the conclusive outcome. Remember that the goal of most abstracts is to inform, not entice, so mentioning your results here can help others better classify and categorize your paper. 

This is often the biggest section of your abstract. It involves most of the concrete details surrounding your paper, so don’t be afraid to give it an extra sentence or two compared to the others. 

The discussion section explains the ultimate conclusion and its ramifications. Based on the data and examination, what can we take away from this paper? The discussion section often goes beyond the scope of the project itself, including the implications of the research or what it adds to its field as a whole. 

Other inclusions

Aside from the IMRaD aspects, your abstract may require some of the following areas:

• Keywords — Like hashtags for research papers, keywords list out the topics discussed in your paper so interested people can find it more easily, especially with online formats. The APA format (explained below) has specific requirements for listing keywords, so double-check there before listing yours. 
• Ethical concerns — If your research deals with ethically gray areas, i.e., testing on animals, you may want to point out any concerns here, or issue reassurances. 
• Consequences — If your research disproves or challenges a popular theory or belief, it’s good to mention that in the abstract — especially if you have new evidence to back it up. 
• Conflicts of Interest/Disclosures — Although different forums have different rules on disclosing conflicts of interests, it’s generally best to mention them in your abstract. For example, maybe you received funding from a biased party. 

If you’re ever in doubt about what to include in your abstract, just remember that it should act as a succinct summary of your entire paper. Include all the relevant points, but only the highlights. 

Abstract formats

In general, abstracts are pretty uniform since they’re exclusive to formal documents. That said, there are a couple of technical formats you should be aware of. 

APA format  

The American Psychological Association (APA) has specific guidelines for their papers in the interest of consistency. Here’s what the 7th edition Publication Manual has to say about formatting abstracts:

• Double-space your text.
• Set page margins at 1 inch (2.54 cm).
• Write the word “Abstract” at the top of the page, centered and in a bold font.
• Don’t indent the first line.
• Keep your abstract under 250 words.
• Include a running header and page numbers on all pages, including the abstract.

Abstract keywords have their own particular guidelines as well: 

• Label the section as “ Keywords: ” with italics.
• Indent the first line at 0.5 inches, but leave subsequent lines as is.
• Write your keywords on the same line as the label.
• Use lower-case letters.
• Use commas, but not conjunctions.

Structured abstracts

Structured abstracts are a relatively new format for scientific papers, originating in the late 1980s. Basically, you just separate your abstract into smaller subsections — typically based on the IMRaD categories — and label them accordingly. 

The idea is to enhance scannability; for example, if readers are only interested in the methodology, they can skip right to the methodology. The actual writing of structured abstracts, though, is more-or-less the same as traditional ones. 

Unstructured abstracts are still the convention, though, so double-check beforehand to see which one is preferred.

3 expert tips for writing abstracts

1 autonomous works.

Abstracts are meant to be self-contained, autonomous works. They should act as standalone documents, often with a beginning, middle, and end. The thinking is that, even if you never read the actual paper, you’ll still understand the entire scope of the project just from the abstract. 

Keep that in mind when you write your abstract: it should be a microcosm of the entire piece, with all the key points, but none of the details. 

2 Write the abstract last

Because the abstract comes first, it’s tempting to write it first. However, writing the abstract at the end is more effective since you have a better understanding of what is actually in your paper. You’ll also discover new implications as you write, and perhaps even shift the structure a bit. In any event, you’re better prepared to write the abstract once the main paper is completed. 

3 Abstracts are not introductions

A common misconception is to write your abstract like an introduction — after all, it’s the first section of your paper. However, abstracts follow a different set of guidelines, so don’t make this mistake. 

Abstracts are summaries, designed to encapsulate the findings of your paper and assist with organization and searchability. A good abstract includes background information and context, not to mention results and conclusions. Abstracts are also self-contained, and can be read independently of the rest of the paper. 

Introductions, by contrast, serve to gradually bring the reader up to speed on the topic. Their goals are less clinical and more personable, with room to elaborate and build anticipation. Introductions are also an integral part of the paper, and feel incomplete if read independently. 

Give your formal writing the My Fair Lady treatment

Formal papers — the kind that requires abstracts — need formal language. But for most of us, that means changing the way we communicate or even think. You may want to consider the My Fair Lady treatment, which is to say, having a skilled mentor coach what you say. 

Grammarly Premium now offers a new Set Goals feature that helps you tailor your language to your audience or intention. All you have to do is set the goals of a particular piece of writing and Grammarly will customize your feedback accordingly. For example, you can select the knowledge level of your readers, the formality of the tone, and the domain or field you’re writing for (i.e., academic, creative, business, etc.). You can even set a tone to sound more analytical or respectful! 

Here’s a tip: Grammarly’s  Citation Generator  ensures your essays have flawless citations and no plagiarism. Try it for citing abstracts in Chicago , MLA , and APA styles.

Welcome to the new OASIS website! We have academic skills, library skills, math and statistics support, and writing resources all together in one new home.

• Walden University
• Faculty Portal

Writing for Publication: Abstracts

An abstract is "a brief, comprehensive summary of the contents of the paper" (American Psychological Association [APA], 2020, p. 38). This summary is intended to share the topic, argument, and conclusions of a research study or course paper, similar to the text on the back cover of a book. When submitting your work for publication, an abstract is often the first piece of your writing a reviewer will encounter. An abstract may not be required for course papers.

Read on for more tips on making a good first impression with a successful abstract.

An abstract is a single paragraph preceded by the heading " Abstract ," centered and in bold font. The abstract does not begin with an indented line. APA (2020) recommends that abstracts should generally be less than 250 words, though many journals have their own word limits; it is always a good idea to check journal-specific requirements before submitting. The Writing Center's APA templates are great resources for visual examples of abstracts.

Abstracts use the present tense to describe currently applicable results (e.g., "Results indicate...") and the past tense to describe research steps (e.g., "The survey measured..."), and they do not typically include citations.

Key terms are sometimes included at the end of the abstract and should be chosen by considering the words or phrases that a reader might use to search for your article.

An abstract should include information such as

• The problem or central argument of your article
• A brief exposition of research design, methods, and procedures.
• A brief summary of your findings
• A brief summary of the implications of the research on practice and theory

It is also appropriate, depending on the type of article you are writing, to include information such as:

• Participant number and type
• Study eligibility criteria
• Limitations of your study
• Implications of your study's conclusions or areas for additional research

Your abstract should avoid unnecessary wordiness and focus on quickly and concisely summarizing the major points of your work. An abstract is not an introduction; you are not trying to capture the reader's attention with timeliness or to orient the reader to the entire background of your study. When readers finish reading your abstract, they should have a strong sense of your article's purpose, approach, and conclusions. The Walden Office of Research and Doctoral Services has additional  tutorial material on abstracts .

Clinical or Empirical Study Abstract Exemplar

In the following abstract, the article's problem is stated in red , the approach and design are in blue , and the results are in green .

End-stage renal disease (ESRD) patients have a high cardiovascular mortality rate. Precise estimates of the prevalence, risk factors and prognosis of different manifestations of cardiac disease are unavailable. In this study a prospective cohort of 433 ESRD patients was followed from the start of ESRD therapy for a mean of 41 months. Baseline clinical assessment and echocardiography were performed on all patients.  The major outcome measure was death while on dialysis therapy. Clinical manifestations of cardiovascular disease were highly prevalent at the start of ESRD therapy: 14% had coronary artery disease, 19% angina pectoris, 31% cardiac failure, 7% dysrhythmia and 8% peripheral vascular disease. On echocardiography 15% had systolic dysfunction, 32% left ventricular dilatation and 74% left ventricular hypertrophy. The overall median survival time was 50 months. Age, diabetes mellitus, cardiac failure, peripheral vascular disease and systolic dysfunction independently predicted death in all time frames. Coronary artery disease was associated with a worse prognosis in patients with cardiac failure at baseline. High left ventricular cavity volume and mass index were independently associated with death after two years. The independent associations of the different echocardiographic abnormalities were: systolic dysfunction--older age and coronary artery disease; left ventricular dilatation--male gender, anemia, hypocalcemia and hyperphosphatemia; left ventricular hypertrophy--older age, female gender, wide arterial pulse pressure, low blood urea and hypoalbuminemia. We conclude that clinical and echocardiographic cardiovascular disease are already present in a very high proportion of patients starting ESRD therapy and are independent mortality factors.

Foley, R. N., Parfrey, P. S., Harnett, J. D., Kent, G. M., Martin, C. J., Murray, D. C., & Barre, P. E. (1995). Clinical and echocardiographic disease in patients starting end-stage renal disease therapy. Kidney International , 47 , 186–192. https://doi.org/10.1038/ki.1995.22

Literature Review Abstract Exemplar

In the following abstract, the purpose and scope of the literature review are in red , the specific span of topics is in blue , and the implications for further research are in green .

This paper provides a review of research into the relationships between psychological types, as measured by the Myers-Briggs Type Indicator (MBTI), and managerial attributes, behaviors and effectiveness. The literature review includes an examination of the psychometric properties of the MBTI and the contributions and limitations of research on psychological types. Next, key findings are discussed and used to advance propositions that relate psychological type to diverse topics such as risk tolerance, problem solving, information systems design, conflict management and leadership. We conclude with a research agenda that advocates: (a) the exploration of potential psychometric refinements of the MBTI, (b) more rigorous research designs, and (c) a broadening of the scope of managerial research into type.

Gardner, W. L., & Martinko, M. J. (1996). Using the Myers-Briggs Type Indicator to study managers: A literature review and research agenda. Journal of Management, 22 (1), 45–83. https://doi.org/10.1177/014920639602200103

Didn't find what you need? Email us at [email protected] .

• Previous Page: Cover Letters
• Next Page: Formatting and Editing
• Office of Student Disability Services

Walden Resources

Departments.

• Academic Residencies
• Academic Skills
• Career Planning and Development
• Customer Care Team
• Field Experience
• Military Services
• Student Success Advising
• Writing Skills

Centers and Offices

• Center for Social Change
• Office of Academic Support and Instructional Services
• Office of Degree Acceleration
• Office of Research and Doctoral Services
• Office of Student Affairs

Student Resources

• Doctoral Writing Assessment
• Form & Style Review
• Quick Answers
• ScholarWorks
• SKIL Courses and Workshops
• Walden Bookstore
• Walden Catalog & Student Handbook
• Student Safety/Title IX
• Legal & Consumer Information
• Website Terms and Conditions
• Cookie Policy
• Accessibility
• Accreditation
• State Authorization
• Net Price Calculator
• Cost of Attendance
• Contact Walden

Walden University is a member of Adtalem Global Education, Inc. www.adtalem.com Walden University is certified to operate by SCHEV © 2024 Walden University LLC. All rights reserved.

Reference management. Clean and simple.

What is the abstract of a paper?

What is an abstract?

The function of an abstract, abstract style, frequently asked questions about abstracts, related articles.

An abstract is a summary of the main contents of a paper.

An abstract provides an overview of a paper’s main arguments and conclusions. They provide the reader with a first glimpse at the paper’s contents. An abstract can influence the popularity of a paper: a well-written one will attract readers, while a poorly-written one may drive them away.

➡️ Abstracts are also used for conference submissions. If you’re preparing a presentation, take a look at our guide on how to make a scientific presentation .

The purpose of an abstract is to provide a concise description of the basic points of the paper. Researchers, academics, and general readers focus on reading abstracts before reading the rest of the paper. This way, they know what to expect in the following pages.

By reading an abstract, people decide if the paper’s information is useful for their own research or not. Therefore, it is imperative to include the most relevant aspects of the paper in the abstract.

➡️ Our guide on how to write an abstract features tips and strategies for writing and formatting abstracts.

Tip: Always wait until you’ve finished writing your paper before composing the abstract.

The exact format of an abstract depends on the citation style you implement. Whether it’s a known style (like APA, IEEE, etc.) or a journal's style, each format has its own guidelines, so make sure to know which style you are using before writing your abstract.

APA is one of the most commonly used styles to format an abstract. Therefore, we created a guide with exact instructions on how to write an abstract in APA style, and a template to download:

📕 APA abstract page: format and template

Additionally, you will find below an IEEE and ASA abstract guide by Purdue Online Writing Lab :

📗 IEEE General Format - Abstract

📘 ASA Manuscript Formatting - Abstract

You should always write an abstract last. Once you finish writing the whole paper, you are ready to write the abstract. This way you can include all important aspects of the paper, such as your aim of research, methodology, and conclusion.

The length of a abstract depends on the formatting style of the paper. For example, APA style calls for 150 to 250 words. Generally, you need between 150-300 words.

No. An abstract has an independent section after the title page and before the index, and should not be included in the table of contents.

Take a look at APA abstract page: format and template for exact details on how to format an abstract in APA style.

You can access any paper through Google Scholar or any other search engine, pick a paper and read the abstract. Abstracts are always freely available to read.

• Langson Library
• Science Library
• Grunigen Medical Library
• Law Library
• Connect From Off-Campus
• Accessibility
• Gateway Study Center

Email this link

Writing a scientific paper.

• Writing a lab report

What is an abstract?

What is a "good" abstract, techniques to write an abstract, "abstract checklist" from: how to write a good scientific paper. chris a. mack. spie. 2018..

• INTRODUCTION
• LITERATURE CITED
• Bibliography of guides to scientific writing and presenting
• Peer Review
• Presentations
• Lab Report Writing Guides on the Web

There are as many kinds as abstracts as there are types of research papers.  The classic abstract is usually a "Informative" abstract. This kind of abstract communicates compressed information and include the purpose, methods, and scope of the article. They are usually short (250 words or less) and allow the reader to decide whether they want to read the article.

The goal is to communicate:

• What was done?
• Why was it done?
• How was it done?
• What was found?
• What is the significance of the findings?
• Self contained. Uses 1 or more well developed paragraphs
• Uses introduction/body/conclusion structure
• Presents purpose, results, conclusions and recommendations in that order
• Adds no new information
• Is understandable to a wide audience
• Write the abstract last
• Reread the article looking specifically for the main parts: Purpose, methods, scope, results, conclusions, and recommendations
• Write a first rough draft without looking at the original article
• Edit your draft by correcting organization, improving transitions, dropping unnecessary information and words, and adding important information you left out

The abstract should be a concise (200 words or less), standalone summary of the paper, with 1–2 sentences on each of these topics:

• Background: What issues led to this work? What is the environment that makes this work interesting or important?
• Aim: What were the goals of this work? What gap is being filled?
• Approach: What went into trying to achieve the aims (e.g., experimental method, simulation approach, theoretical approach, combinations of these, etc.)? What was actually done?
• Results: What were the main results of the study (including numbers, if appropriate)?
• Conclusions: What were the main conclusions? Why are the results important? Where will they lead?

The abstract should be written for the audience of this journal: do not assume too much or too little background with the topic.

Ensure that all of the information found in the abstract also can be found in the body of the paper.

Ensure that the important information of the paper is found in the abstract.

Avoid: using the first paragraph of the introduction as an abstract; citations in the abstract; acronyms (but if used, spell them out); referring to figures or tables from the body of the paper; use of the first person; use of words like “new” or “novel,” or phrases like “in this paper,” “we report,” or “will be discussed.” 

• << Previous: TITLE
• Next: INTRODUCTION >>
• Last Updated: Aug 4, 2023 9:33 AM
• URL: https://guides.lib.uci.edu/scientificwriting

Off-campus? Please use the Software VPN and choose the group UCIFull to access licensed content. For more information, please Click here

Software VPN is not available for guests, so they may not have access to some content when connecting from off-campus.

Magnum Proofreading Services

• Jake Magnum
• Jan 2, 2021

Writing an Abstract for a Research Paper: Guidelines, Examples, and Templates

There are six steps to writing a standard abstract. (1) Begin with a broad statement about your topic. Then, (2) state the problem or knowledge gap related to this topic that your study explores. After that, (3) describe what specific aspect of this problem you investigated, and (4) briefly explain how you went about doing this. After that, (5) describe the most meaningful outcome(s) of your study. Finally, (6) close your abstract by explaining the broad implication(s) of your findings.

In this article, I present step-by-step guidelines for writing an abstract for an academic paper. These guidelines are fo llowed by an example of a full abstract that follows these guidelines and a few fill-in-the-blank templates that you can use to write your own abstract.

Guidelines for Writing an Abstract

The basic structure of an abstract is illustrated below.

A standard abstract starts with a very general statement and becomes more specific with each sentence that follows until once again making a broad statement about the study’s implications at the end. Altogether, a standard abstract has six functions, which are described in detail below.

Start by making a broad statement about your topic.

The first sentence of your abstract should briefly describe a problem that is of interest to your readers. When writing this first sentence, you should think about who comprises your target audience and use terms that will appeal to this audience. If your opening sentence is too broad, it might lose the attention of potential readers because they will not know if your study is relevant to them.

Too broad : Maintaining an ideal workplace environment has a positive effect on employees.

The sentence above is so broad that it will not grab the reader’s attention. While it gives the reader some idea of the area of study, it doesn’t provide any details about the author’s topic within their research area. This can be fixed by inserting some keywords related to the topic (these are underlined in the revised example below).

Improved : Keeping the workplace environment at an ideal temperature positively affects the overall health of employees.

The revised sentence is much better, as it expresses two points about the research topic—namely, (i) what aspect of workplace environment was studied, (ii) what aspect of employees was observed. The mention of these aspects of the research will draw the attention of readers who are interested in them.

Describe the general problem that your paper addresses.

After describing your topic in the first sentence, you can then explain what aspect of this topic has motivated your research. Often, authors use this part of the abstract to describe the research gap that they identified and aimed to fill. These types of sentences are often characterized by the use of words such as “however,” “although,” “despite,” and so on.

However, a comprehensive understanding of how different workplace bullying experiences are associated with absenteeism is currently lacking.

The above example is typical of a sentence describing the problem that a study intends to tackle. The author has noticed that there is a gap in the research, and they briefly explain this gap here.

Although it has been established that quantity and quality of sleep can affect different types of task performance and personal health, the interactions between sleep habits and workplace behaviors have received very little attention.

The example above illustrates a case in which the author has accomplished two tasks with one sentence. The first part of the sentence (up until the comma) mentions the general topic that the research fits into, while the second part (after the comma) describes the general problem that the research addresses.

Express the specific problem investigated in your paper.

After describing the general problem that motivated your research, the next sentence should express the specific aspect of the problem that you investigated. Sentences of this type are often indicated by the use of phrases like “the purpose of this research is to,” “this paper is intended to,” or “this work aims to.”

Uninformative : However, a comprehensive understanding of how different workplace bullying experiences are associated with absenteeism is currently lacking. The present article aimed to provide new insights into the relationship between workplace bullying and absenteeism .

The second sentence in the above example is a mere rewording of the first sentence. As such, it adds nothing to the abstract. The second sentence should be more specific than the preceding one.

Improved : However, a comprehensive understanding of how different workplace bullying experiences are associated with absenteeism is currently lacking. The present article aimed to define various subtypes of workplace bullying and determine which subtypes tend to lead to absenteeism .

The second sentence of this passage is much more informative than in the previous example. This sentence lets the reader know exactly what they can expect from the full research article.

Explain how you attempted to resolve your study’s specific problem.

In this part of your abstract, you should attempt to describe your study’s methodology in one or two sentences. As such, you must be sure to include only the most important information about your method. At the same time, you must also be careful not to be too vague.

Too vague : We conducted multiple tests to examine changes in various factors related to well-being.

This description of the methodology is too vague. Instead of merely mentioning “tests” and “factors,” the author should note which specific tests were run and which factors were assessed.

Improved : Using data from BHIP completers, we conducted multiple one-way multivariate analyses of variance and follow-up univariate t-tests to examine changes in physical and mental health, stress, energy levels, social satisfaction, self-efficacy, and quality of life.

This sentence is very well-written. It packs a lot of specific information about the method into a single sentence. Also, it does not describe more details than are needed for an abstract.

Briefly tell the reader what you found by carrying out your study.

This is the most important part of the abstract—the other sentences in the abstract are there to explain why this one is relevant. When writing this sentence, imagine that someone has asked you, “What did you find in your research?” and that you need to answer them in one or two sentences.

Too vague : Consistently poor sleepers had more health risks and medical conditions than consistently optimal sleepers.

This sentence is okay, but it would be helpful to let the reader know which health risks and medical conditions were related to poor sleeping habits.

Improved : Consistently poor sleepers were more likely than consistently optimal sleepers to suffer from chronic abdominal pain, and they were at a higher risk for diabetes and heart disease.

This sentence is better, as the specific health conditions are named.

Finally, describe the major implication(s) of your study.

Most abstracts end with a short sentence that explains the main takeaway(s) that you want your audience to gain from reading your paper. Often, this sentence is addressed to people in power (e.g., employers, policymakers), and it recommends a course of action that such people should take based on the results.

Too broad : Employers may wish to make use of strategies that increase employee health.

This sentence is too broad to be useful. It does not give employers a starting point to implement a change.

Improved : Employers may wish to incorporate sleep education initiatives as part of their overall health and wellness strategies.

This sentence is better than the original, as it provides employers with a starting point—specifically, it invites employers to look up information on sleep education programs.

Abstract Example

The abstract produced here is from a paper published in Electronic Commerce Research and Applications . I have made slight alterations to the abstract so that this example fits the guidelines given in this article.

(1) Gamification can strengthen enjoyment and productivity in the workplace. (2) Despite this, research on gamification in the work context is still limited. (3) In this study, we investigated the effect of gamification on the workplace enjoyment and productivity of employees by comparing employees with leadership responsibilities to those without leadership responsibilities. (4) Work-related tasks were gamified using the habit-tracking game Habitica, and data from 114 employees were gathered using an online survey. (5) The results illustrated that employees without leadership responsibilities used work gamification as a trigger for self-motivation, whereas employees with leadership responsibilities used it to improve their health. (6) Work gamification positively affected work enjoyment for both types of employees and positively affected productivity for employees with leadership responsibilities. (7) Our results underline the importance of taking work-related variables into account when researching work gamification.

In Sentence (1), the author makes a broad statement about their topic. Notice how the nouns used (“gamification,” “enjoyment,” “productivity”) are quite general while still indicating the focus of the paper. The author uses Sentence (2) to very briefly state the problem that the research will address.

In Sentence (3), the author explains what specific aspects of the problem mentioned in Sentence (2) will be explored in the present work. Notice that the mention of leadership responsibilities makes Sentence (3) more specific than Sentence (2). Sentence (4) gets even more specific, naming the specific tools used to gather data and the number of participants.

Sentences (5) and (6) are similar, with each sentence describing one of the study’s main findings. Then, suddenly, the scope of the abstract becomes quite broad again in Sentence (7), which mentions “work-related variables” instead of a specific variable and “researching” instead of a specific kind of research.

Abstract Templates

Copy and paste any of the paragraphs below into a word processor. Then insert the appropriate information to produce an abstract for your research paper.

Template #1

Researchers have established that [Make a broad statement about your area of research.] . However, [Describe the knowledge gap that your paper addresses.] . The goal of this paper is to [Describe the purpose of your paper.] . The achieve this goal, we [Briefly explain your methodology.] . We found that [Indicate the main finding(s) of your study; you may need two sentences to do this.] . [Provide a broad implication of your results.] .

Template #2

It is well-understood that [Make a broad statement about your area of research.] . Despite this, [Describe the knowledge gap that your paper addresses.] . The current research aims to [Describe the purpose of your paper.] . To accomplish this, we [Briefly explain your methodology.] . It was discovered that [Indicate the main finding(s) of your study; you may need two sentences to do this.] . [Provide a broad implication of your results.] .

Template #3

Extensive research indicates that [Make a broad statement about your area of research.] . Nevertheless, [Describe the knowledge gap that your paper addresses.] . The present work is intended to [Describe the purpose of your paper.] . To this end, we [Briefly explain your methodology.] . The results revealed that [Indicate the main finding(s) of your study; you may need two sentences to do this.] . [Provide a broad implication of your results.] .

• How to Write an Abstract

Related Posts

How to Write a Research Paper in English: A Guide for Non-native Speakers

How to Write an Abstract Quickly

Using the Present Tense and Past Tense When Writing an Abstract

• Homework Help
• Essay Examples
• Citation Generator

Writing Guides

• Essay Title Generator
• Essay Topic Generator
• Essay Outline Generator
• Flashcard Generator
• Plagiarism Checker
• Paraphrasing Tool
• Conclusion Generator
• Thesis Statement Generator
• Introduction Generator
• Literature Review Generator
• Hypothesis Generator
• Human Editing Service
• Essay Hook Generator

Writing Guides  /  15 Abstract Examples: A Comprehensive Guide

15 Abstract Examples: A Comprehensive Guide

Demystifying Abstract Writing

An abstract represents a concise, well-articulated summary of an academic piece or research. But writing an abstract goes beyond merely creating a summary. In this piece, we’ll delve into examples of abstracts to illuminate what they truly are, along with the necessary tone, style, and word counts.

You’ll also see how diverse abstract writing can be, tailored according to the subject area. For instance, an abstract for empirical research in the sciences contrasts greatly from that of a humanities article.

View 120,000+ High Quality Essay Examples

Learn-by-example to improve your academic writing

The Importance of Abstracts: Why Do We Write Them?

Every abstract you encounter, including our abstract writing example, has a few core characteristics. The primary role of an abstract is to encapsulate the essential points of a research article, much like a book’s back cover. The back jacket often influences whether you buy the book or not.

Similarly, academic papers are often behind paywalls, and the abstract assists readers in deciding if they should purchase the article. If you’re a student or researcher, the abstract helps you gauge whether the article is worth your time.

Furthermore, abstracts promote ongoing research in your field by incorporating keywords that allow others to locate your work. Knowing how to write a good abstract contributes to your professionalism, especially crucial for graduate-level studies. This skill might be vital when submitting your research to peer-reviewed journals or soliciting grant funding.

Breaking Down an Abstract: What’s Inside?

The contents of an abstract heavily rely on the type of study, research design, and subject area. An abstract may contain a succinct background statement highlighting the research’s significance, a problem statement, the methodologies used, a synopsis of the results, and the conclusions drawn.

When it comes to writing an abstract for a research paper, striking a balance between consciousness and informative detail is essential. Our examples of abstracts will help you grasp this balance better.

Moreover, you’ll learn how to format abstracts variably, matching the requirements of your degree program or publication guidelines.

Key Elements to Include in Your Abstract

• Brief Background: Introduce the importance of the research from your point of view.
• Problem Statement: Define the issue your research addresses, commonly referred to as the thesis statement.
• Methodology: Describe the research methods you employed.
• Synopsis: This should include a summary of your results and conclusions.
• Keywords: Implement terms that others will use to find your article.

Types of Abstracts

• Descriptive Abstracts: These give an overview of the source material without delving into results and conclusions.
• Informative Abstracts: These offer a more detailed look into your research, including the purpose, methods, results, and conclusions.
• Always write your abstract in the present tense.
• Keep track of word counts to maintain brevity.
• The original text should guide your abstract.
• Always provide a good synopsis in your abstract.
• If needed, use your abstract to draft a compelling query letter.
• Consider providing a literature review abstract if your research involves an extensive review of existing literature.

Types of Abstract

According to the Purdue Online Writing Lab resource, there are two different types of abstract: informational and descriptive.

Although informative and descriptive abstracts seem similar, they are different in a few key ways.

An informative abstract contains all the information related to the research, including the results and the conclusion.

A descriptive abstract is typically much shorter, and does not provide as much information. Rather, the descriptive abstract just tells the reader what the research or the article is about and not much more.

The descriptive abstract is more of a tagline or a teaser, whereas the informative abstract is more like a summary.

You will find both types of abstracts in the examples below.

Abstract Examples

Informative abstract example 1.

Emotional intelligence (EQ) has been correlated with leadership effectiveness in organizations. Using a mixed-methods approach, this study assesses the importance of emotional intelligence on academic performance at the high school level.

The Emotional Intelligence rating scale was used, as well as semi-structured interviews with teachers. Participant grades were collected. Emotional intelligence was found to correlate positively with academic success. Implications for pedagogical practice are discussed.

Explanation

This is a typical informative abstract for empirical social sciences research. Most informative abstracts proceed in a logical fashion to reflect the organization of the main paper: with sections on the background, methods, results, and conclusions.

Informative Abstract Example 2

Social learning takes place through observations of others within a community. In diverse urban landscapes and through digital media, social learning may be qualitatively different from the social learning that takes place within families and tightly-knit social circles.

This study examines the differences between social learning that takes place in the home versus social learning that takes place from watching celebrities and other role models online. Results show that social learning takes place with equal efficacy. These results show that social learning does not just take place within known social circles, and that observations of others can lead to multiple types of learning.

This is a typical informative abstract for empirical social science research. After the background statement, the author discusses the problem statement or research question, followed by the results and the conclusions.

Informative Abstract Example 3

Few studies have examined the connection between visual imagery and emotional reactions to news media consumption. This study addresses the gap in the literature via the use of content analysis. Content analysis methods were used to analyze five news media television sites over the course of six months.

Using the Yolanda Metrics method, the researchers ascertained ten main words that were used throughout each of the news media sites. Implications and suggestions for future research are included.

This abstract provides an informative synopsis of a quantitative study on content analysis. The author provides the background information, addresses the methods, and also outlines the conclusions of the research.

Informative Abstract Example 4

This study explores the relationship between nurse educator theoretical viewpoints and nursing outcomes. Using a qualitative descriptive study, the researchers conducted face-to-face interviews with nursing students and nurse educators. The results show that nurse educator theoretical viewpoints had a direct bearing on nurse self-concept. Nurse educators should be cognizant of their biases and theoretical viewpoints when instructing students.

This example showcases how to write an abstract for a qualitative study. Qualitative studies also have clearly defined research methods. Therefore, it is important to keep in mind the general principles of informative abstract writing. Always begin with the research question or problem statement, and proceed to offer a one-sentence description of study methods and results.

Informative Abstract Example 5

Aboriginal people have poorer health outcomes versus their counterparts from other ethnic groups. In this study, public health researchers conducted an epidemiological data analysis using results from the Transcultural Health Report. Using a chi-square test, the researchers found that there is a direct correlation between ethnicity and health status. Policymakers should consider introducing methods for reducing health disparities among minority groups.

This informative abstract details the methods used in the report. As with other informative abstracts, it is written in the past tense. The abstract provides the reader with a summary of the research that has already been conducted.

Informative Abstract Example 6

We examine the contradictions of decolonization as official state policy. Using themes related to decolonization from the literature, we discuss how oppressed people develop cogent policies that create new systems of power. Intersectionality is also discussed.

Through a historical analysis, it was found that decolonization and political identity construction take place not as reactionary pathways but as deliberate means of regaining access to power and privilege. The cultivation of new political and social identities promotes social cohesion in formerly colonized nation-states, paving the way for future means of identity construction.

This abstract is informative but because it does not involve a unique empirical research design, it is written in a different manner from other informative abstracts. The researchers use tone, style, and diction that parallels that which takes place within the body of the text. The main themes are elucidated.

Informative Abstract Example 7

The implementation of a nationwide mandatory vaccination program against influenza in the country of Maconda was designed to lower rates of preventable illnesses. This study was designed to measure the cost-effectiveness of the mandatory vaccination program.

This is a cohort study designed to assess the rates of new influenza cases among both children (age > 8 years) and adults (age > 18 years). Using the National Reference Data Report of Maconda, the researchers compiled new case data (n = 2034) from 2014 to 2018.

A total of 45 new cases were reported during the years of 2014 and 2015, and after that, the number of new cases dropped by 74%.

The significant decrease in new influenza cases can be attributed to the introduction of mandatory vaccination.

Interpretation

The mandatory vaccination program proves cost-effective given its efficacy in controlling the disease.

This method of writing an informative abstract divides the content into respective subject headers. This style makes the abstract easier for some readers to scan quickly.

Informative Abstract Example 8

Mindfulness-based meditation and mindfulness-based stress reduction techniques have been shown to reduce burnout and improve employee engagement. Using a pretest/posttest design, the researchers randomly assigned nurses (n = 136) to the control and experimental groups. The Kabat-Zinn mindfulness-based stress reduction technique was used as the primary intervention for the experimental group.

Quantitative findings revealed significant improvements on self-report scales for depression and anxiety. Nurse leaders and administrators should consider implementing a mindfulness-based stress reduction program to reduce burnout and improve overall nurse performance.

This abstract contains all the necessary information you would need to make an assessment of whether the research was pertinent to your study. When you are writing an informative abstract, consider taking one sentence from each of the sections in your research (introduction/background, methods, results, and conclusion).

Descriptive Abstract Example 1

What inspires individuals to become members of a new religious movement, or a “cult”? This review of the literature offers some suggestions as to the psychological and sociological motivations for joining a new religious movement, offering suggestions for future research.

Unlike informative abstracts, descriptive abstracts simply alert the reader of the main gist of the article. Reading this abstract does not tell you exactly what the researchers found out about their subject, but it does let the reader know what the overall subject matter was and the methods used to conduct the research.

Descriptive Abstract Example 2

With few remaining survivors of the Holocaust, it becomes critical for historians to gather as much data that can contribute to an overall understanding of the ways trauma has been incorporated into identity. Interviews with five Holocaust survivors reveal new information about the role that art and music played in self-healing and community healing.

This descriptive abstract does not give too much information away, simply telling the reader that the researcher used interviews and a case study research design. Although it is a brief description of the study, the researchers succinctly summarize the contents and results.

Descriptive Abstract Example 3

Absurdist theater and literature have had a strong influence on playwrights in France and England. This analysis of absurdist theater addresses the primary symbols being used in absurdist literature and traces the evolution of those symbols as they parallel historical events.

As with most descriptive abstracts, this example is short. You can use descriptive abstracts to provide the reader with a summary of non-empirical research such as literary criticism.

Descriptive Abstract Example 4

The architecture of Oscar Niemeyer reflects socialist sensibilities in the urban planning of Brasilia. This research explores the philosophical underpinnings of Niemeyer’s design through an analysis of several of the main elements of the National Congress of Brazil. Implications and influences of Niemeyer’s work are also discussed.

Note how with the descriptive abstract, you are writing about the research in a more abstract and detached way than when you write an informative abstract.

Descriptive Abstract Example 5

Jacques Derrida has written extensively on the symbolism and the metonymy of September 11. In this research, we critique Derrida’s position, on the grounds that terrorism is better understood from within a neo-realist framework. Derrida’s analysis lacks coherence, is pompous and verbose, and is unnecessarily abstract when considering the need for a cogent counterterrorism strategy.

Like most descriptive abstracts, this encapsulates the main idea of the research but does not necessarily follow the same format as you might use in an informative abstract. Whereas an informative abstract follows the chronological format used in the paper you present, with introduction, methods, findings, and conclusion, a descriptive abstract only focuses on the main idea.

Descriptive Abstract Example 6

The Five Factor model of personality has been well established in the literature and is one of the most reliable and valid methods of assessing success. In this study, we use the Five Factor model to show when the qualities of neuroticism and introversion, which have been typically linked with low rates of success, are actually correlated with achievement in certain job sectors. Implications and suggestions for clinicians are discussed.

This descriptive abstract does not discuss the methodology used in the research, which is what differentiates it from an informative abstract. However, the description does include the basic elements contained in the report.

Descriptive Abstract Example 7

This is a case study of a medium-sized company, analyzing the competencies required for entering into the Indian retail market. Focusing on Mumbai and Bangalore, the expansion into these markets reveals potential challenges for European firms. A comparison case with a failed expansion into Wuhan, China is given, offering an explanation for how there are no global cross-cultural competencies that can be applied in all cases.

While this descriptive abstract shows the reader what the paper addresses, the methods and results are omitted. A descriptive abstract is shorter than an informative abstract.

Which Type of Abstract Should I Use?

Check with your professors or academic advisors, or with the editor of the peer-reviewed journal before determining which type of abstract is right for you.

If you have conducted original empirical research in the social sciences, you will most likely want to use an informative abstract.

However, when you are writing about the arts or humanities, a descriptive abstract might work best.

What Information Should I Include in An Abstract?

The information you include in the abstract will depend on the substantive content of your report.

Consider breaking down your abstract into five separate components, corresponding roughly with the structure of your original research.

You can write one or two sentences on each of these sections:

For Original Empirical Research

1. Background/Introductory Sentence

If you have conducted, or are going to conduct, an original research, then consider the following elements for your abstract:

What was your hypothesis?

What has the previous literature said about your subject?

What was the gap in the literature you are filling with your research?

What are the research questions?

What problem are you trying to solve?

What theoretical viewpoint or approach did you take?

What was your research design (qualitative, quantitative, multi-factorial, mixed-methods)?

What was the setting? Did you conduct a clinical analysis? Or did you conduct a systematic review of literature or a meta-analysis of data?

How many subjects were there?

How did you collect data?

How did you analyze the data?

What methodological weaknesses need to be mentioned?

III. Results

If this was a qualitative study, what were the major findings?

If this was a quantitative study, what were the major findings? Was there an alpha coefficient? What was the standard deviation?

Were the results statistically significant?

1. Discussion

Did the results prove or disprove the hypothesis ?

Were the results significant enough to inform future research?

How do your results link up with previous research? Does your research confirm or go beyond prior literature?

1. Conclusions/Recommendations

What do your results say about the research question or problem statement?

If you had to make a policy recommendation or offer suggestions to other scholars, what would you say?

Are there any concluding thoughts or overarching impressions?

Writing Abstracts for Literary Criticism and Humanities Research

Writing abstracts for research that is not empirical in nature does not involve the same steps as you might use when composing an abstract for the sciences or social sciences.

When writing an abstract for the arts and humanities, consider the following outline, writing one or two sentences for each section:

1. Background/Introduction

What other scholars have said before.

Why you agree or disagree.

Why this is important to study.

1. Your methods or approach

How did you conduct your research?

Did you analyze a specific text, case study, or work of art?

Are you comparing and contrasting?

What philosophical or theoretical model did you use?

III. Findings

What did you discover in the course of your research?

1. Discussion/Conclusion

How are your findings meaningful?

What new discoveries have you made?

How does your work contribute to the discourse?

General Tips for Writing Abstracts

The best way to improve your abstract writing skills is to read more abstracts. When you read other abstracts, you will understand more about what is expected, and what you should include or leave out from the abstract.

Reading abstracts helps you become more familiar with the tone and style, as well as the structure of abstracts.

Write your abstract after you have completed your research.

Many successful abstracts actually take the first sentence from each section of your research, such as the introduction/background, review of literature, methods, results, discussion, and conclusion.

Although it is a good idea to write the results of your original research, avoid giving too much detail. Instead, focus on what really matters.

A good abstract is like an elevator pitch.

While there is no absolute rule for how long an abstract should be, a general rule of thumb is around 100-150 words. However, some descriptive abstracts may be shorter than that, and some informative abstracts could be longer.

How to Write a Synopsis

Writing a synopsis involves summarizing a work’s key elements, including the narrative arc, major plot points, character development, rising action, and plot twists. Here’s a step-by-step guide on how to create a compelling synopsis.

• Outline the Narrative Arc: Start by defining your story’s beginning, middle, and end. This includes the introduction, rising action, climax, falling action, and resolution.
• Identify Major Plot Points: Major plot points are crucial events that propel your story forward. Identify these critical moments and explain how they contribute to the narrative arc.
• Discuss Character Development: Characters are the backbone of your story. Describe your characters at the start of the story and demonstrate how they evolve by the end.
• Illustrate Rising Action: The rising action is a series of events that lead to the climax of your story. Ensure to discuss these events and how they build suspense and momentum.
• Include Plot Twists: If your story has unexpected turns or surprises, highlight these plot twists in your synopsis. However, ensure these twists aren’t revealed too abruptly.

Remember, a synopsis should provide a complete overview of your story. It’s different from a teaser or back cover blurb — your objective isn’t to create suspense, but to succinctly present the whole narrative.

How Long Should a Summary Be

The length of a summary varies based on the complexity and length of the original work. However, as a rule of thumb, a summary should ideally be no more than 10-15% of the original text’s word count. This ensures you cover the significant plot points, character development, narrative arc, rising action, and plot twists without going into excessive detail.

For instance, if you’re summarizing a 300-page novel, your summary may be about 30 pages. If you’re summarizing a short 5-page article, a half-page to one-page summary should suffice.

Remember, the goal of a summary is to condense the source material, maintaining the core ideas and crucial information while trimming unnecessary details. Always aim for brevity and clarity in your summaries.

Abstracts are even shorter versions of executive summaries. Although abstracts are brief and seem relatively easy, they can be challenging to write. If you are struggling to write your abstract, just consider the main ideas of your original research paper and pretend that you are summarizing that research for a friend.

If you would like more examples of strong abstracts in your field of research, or need help composing your abstract or conducting research, call a writing tutor.

“Abstracts,” (n.d.). The Writing Center. https://writingcenter.unc.edu/tips-and-tools/abstracts/

Koopman, P. (1997). How to write an abstract. https://users.ece.cmu.edu/~koopman/essays/abstract.html

University of Massachusetts, Amherst (n.d.). Writing an abstract.

“Writing Report Abstracts,” (n.d.). Purdue Online Writing Lab. https://owl.english.purdue.edu/owl/resource/656/1/

Take the first step to becoming a better academic writer.

Writing tools.

• How to write a research proposal 2021 guide
• Guide to citing in MLA
• Guide to citing in APA format
• Chicago style citation guide
• Harvard referencing and citing guide
• How to complete an informative essay outline

Unlock Your Writing Potential with Our AI Essay Writing Assistant

The Negative Impacts of Artificial Intelligence on Tactile Learning

Overcome Your Writer’s Block: Essay Writing Tips for Students

How to Write a Synthesis Essay: Tips and Techniques

How to Write an Abstract?

• Open Access
• First Online: 24 October 2021

Cite this chapter

You have full access to this open access chapter

• Samiran Nundy 4 ,
• Atul Kakar 5 &
• Zulfiqar A. Bhutta 6  

62k Accesses

7 Altmetric

An abstract is a crisp, short, powerful, and self-contained summary of a research manuscript used to help the reader swiftly determine the paper’s purpose. Although the abstract is the first paragraph of the manuscript it should be written last when all the other sections have been addressed.

Research is formalized curiosity. It is poking and prying with a purpose. — Zora Neale Hurston, American Author, Anthropologist and Filmmaker (1891–1960)

You have full access to this open access chapter,  Download chapter PDF

Similar content being viewed by others

Writing the Abstract

Abstract and Keywords

Additional Commentaries

1 what is an abstract.

An abstract is usually a standalone document that informs the reader about the details of the manuscript to follow. It is like a trailer to a movie, if the trailer is good, it stimulates the audience to watch the movie. The abstract should be written from scratch and not ‘cut –and-pasted’ [ 1 ].

2 What is the History of the Abstract?

An abstract, in the form of a single paragraph, was first published in the Canadian Medical Association Journal in 1960 with the idea that the readers may not have enough time to go through the whole paper, and the first abstract with a defined structure was published in 1991 [ 2 ]. The idea sold and now most original articles and reviews are required to have a structured abstract. The abstract attracts the reader to read the full manuscript [ 3 ].

3 What are the Qualities of a Good Abstract?

The quality of information in an abstract can be summarized by four ‘C’s. It should be:

C: Condensed

C: Critical

4 What are the Types of Abstract?

Before writing the abstract, you need to check with the journal website about which type of abstract it requires, with its length and style in the ‘Instructions to Authors’ section.

The abstract types can be divided into:

Descriptive: Usually written for psychology, social science, and humanities papers. It is about 50–100 words long. No conclusions can be drawn from this abstract as it describes the major points in the paper.

Informative: The majority of abstracts for science-related manuscripts are informative and are surrogates for the research done. They are single paragraphs that provide the reader an overview of the research paper and are about 100–150 words in length. Conclusions can be drawn from the abstracts and in the recommendations written in the last line.

Critical: This type of abstract is lengthy and about 400–500 words. In this, the authors’ own research is discussed for reliability, judgement, and validation. A comparison is also made with similar studies done earlier.

Highlighting: This is rarely used in scientific writing. The style of the abstract is to attract more readers. It is not a balanced or complete overview of the article with which it is published.

Structured: A structured abstract contains information under subheadings like background, aims, material and methods, results, conclusion, and recommendations (Fig. 15.1 ). Most leading journals now carry these.

Example of a structured abstract (with permission editor CMRP)

5 What is the Purpose of an Abstract?

An abstract is written to educate the reader about the study that follows and provide an overview of the science behind it. If written well it also attracts more readers to the article. It also helps the article getting indexed. The fate of a paper both before and after publication often depends upon its abstract. Most readers decide if a paper is worth reading on the basis of the abstract. Additionally, the selection of papers in systematic reviews is often dependent upon the abstract.

6 What are the Steps of Writing an Abstract?

An abstract should be written last after all the other sections of an article have been addressed. A poor abstract may turn off the reader and they may cause indexing errors as well. The abstract should state the purpose of the study, the methodology used, and summarize the results and important conclusions. It is usually written in the IMRAD format and is called a structured abstract [ 4 , 5 ].

I: The introduction in the opening line should state the problem you are addressing.

M: Methodology—what method was chosen to finish the experiment?

R: Results—state the important findings of your study.

D: Discussion—discuss why your study is important.

Mention the following information:

Important results with the statistical information ( p values, confidence intervals, standard/mean deviation).

Arrange all information in a chronological order.

Do not repeat any information.

The last line should state the recommendations from your study.

The abstract should be written in the past tense.

7 What are the Things to Be Avoided While Writing an Abstract?

Cut and paste information from the main text

Hold back important information

Use abbreviations

Tables or Figures

Generalized statements

Arguments about the study

8 What are Key Words?

These are important words that are repeated throughout the manuscript and which help in the indexing of a paper. Depending upon the journal 3–10 key words may be required which are indexed with the help of MESH (Medical Subject Heading).

9 How is an Abstract Written for a Conference Different from a Journal Paper?

The basic concept for writing abstracts is the same. However, in a conference abstract occasionally a table or figure is allowed. A word limit is important in both of them. Many of the abstracts which are presented in conferences are never published in fact one study found that only 27% of the abstracts presented in conferences were published in the next five years [ 6 ].

Table 15.1 gives a template for writing an abstract.

10 What are the Important Recommendations of the International Committees of Medical Journal of Editors?

The recommendations are [ 7 ]:

An abstract is required for original articles, metanalysis, and systematic reviews.

A structured abstract is preferred.

The abstract should mention the purpose of the scientific study, how the procedure was carried out, the analysis used, and principal conclusion.

Clinical trials should be reported according to the CONSORT guidelines.

The trials should also mention the funding and the trial number.

The abstract should be accurate as many readers have access only to the abstract.

11 Conclusions

An Abstract should be written last after all the other sections of the manuscript have been completed and with due care and attention to the details.

It should be structured and written in the IMRAD format.

For many readers, the abstract attracts them to go through the complete content of the article.

The abstract is usually followed by key words that help to index the paper.

Andrade C. How to write a good abstract for a scientific paper or conference presentation? Indian J Psychiatry. 2011;53:172–5.

Article   Google Scholar  

Squires BP. Structured abstracts of original research and review articles. CMAJ. 1990;143:619–22.

CAS   PubMed   PubMed Central   Google Scholar  

Pierson DJ. How to write an abstract that will be accepted for presentation at a national meeting. Respir Care. 2004 Oct;49:1206–12.

PubMed   Google Scholar  

Tenenbein M. The abstract and the academic clinician. Pediatr Emerg Care. 1995;11:40–2.

Article   CAS   Google Scholar  

Bahadoran Z, Mirmiran P, Kashfi K, Ghasemi A. The principles of biomedical scientific writing: abstract and keywords. Int J Endocrinol Metab. 2020;18:e100159.

PubMed   PubMed Central   Google Scholar  

Grover S, Dalton N. Abstract to publication rate: do all the papers presented in conferences see the light of being a full publication? Indian J Psychiatry. 2020;62:73–9.

Preparing a manuscript for submission to a medical journal. Available on http://www.icmje.org/recommendations/browse/manuscript-preparation/preparing-for-submission.html . Accessed 10 May 2020.

Download references

Author information

Authors and affiliations.

Department of Surgical Gastroenterology and Liver Transplantation, Sir Ganga Ram Hospital, New Delhi, India

Samiran Nundy

Department of Internal Medicine, Sir Ganga Ram Hospital, New Delhi, India

Institute for Global Health and Development, The Aga Khan University, South Central Asia, East Africa and United Kingdom, Karachi, Pakistan

Zulfiqar A. Bhutta

You can also search for this author in PubMed   Google Scholar

Rights and permissions

Open Access This chapter is licensed under the terms of the Creative Commons Attribution 4.0 International License ( http://creativecommons.org/licenses/by/4.0/ ), which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license and indicate if changes were made.

The images or other third party material in this chapter are included in the chapter's Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the chapter's Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder.

Reprints and permissions

Copyright information

© 2022 The Author(s)

About this chapter

Nundy, S., Kakar, A., Bhutta, Z.A. (2022). How to Write an Abstract?. In: How to Practice Academic Medicine and Publish from Developing Countries?. Springer, Singapore. https://doi.org/10.1007/978-981-16-5248-6_15

Download citation

DOI : https://doi.org/10.1007/978-981-16-5248-6_15

Published : 24 October 2021

Publisher Name : Springer, Singapore

Print ISBN : 978-981-16-5247-9

Online ISBN : 978-981-16-5248-6

eBook Packages : Medicine Medicine (R0)

Share this chapter

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Publish with us

Policies and ethics

• Find a journal
• Track your research

• Skip to Guides Search
• Skip to breadcrumb
• Skip to main content
• Skip to footer
• Skip to chat link
• Report accessibility issues and get help
• Go to Penn Libraries Home
• Go to Franklin catalog

CWP: What Data Can Tell Us — Fall 2024: Researching the White Paper

• Getting started
• News and Opinion Sites
• Academic Sources
• Grey Literature
• Substantive News Sources
• What to Do When You Are Stuck
• Understanding a citation
• Examples of Quotation
• Examples of Paraphrase
• Chicago Manual of Style: Citing Images
• Researching the Op-Ed
• Researching Prospective Employers
• Resume Resources
• Cover Letter Resources

Research the White Paper

Researching the white paper:.

The process of researching and composing a white paper shares some similarities with the kind of research and writing one does for a high school or college research paper. What’s important for writers of white papers to grasp, however, is how much this genre differs from a research paper.  First, the author of a white paper already recognizes that there is a problem to be solved, a decision to be made, and the job of the author is to provide readers with substantive information to help them make some kind of decision--which may include a decision to do more research because major gaps remain. 

Thus, a white paper author would not “brainstorm” a topic. Instead, the white paper author would get busy figuring out how the problem is defined by those who are experiencing it as a problem. Typically that research begins in popular culture--social media, surveys, interviews, newspapers. Once the author has a handle on how the problem is being defined and experienced, its history and its impact, what people in the trenches believe might be the best or worst ways of addressing it, the author then will turn to academic scholarship as well as “grey” literature (more about that later).  Unlike a school research paper, the author does not set out to argue for or against a particular position, and then devote the majority of effort to finding sources to support the selected position.  Instead, the author sets out in good faith to do as much fact-finding as possible, and thus research is likely to present multiple, conflicting, and overlapping perspectives. When people research out of a genuine desire to understand and solve a problem, they listen to every source that may offer helpful information. They will thus have to do much more analysis, synthesis, and sorting of that information, which will often not fall neatly into a “pro” or “con” camp:  Solution A may, for example, solve one part of the problem but exacerbate another part of the problem. Solution C may sound like what everyone wants, but what if it’s built on a set of data that have been criticized by another reliable source?  And so it goes. 

For example, if you are trying to write a white paper on the opioid crisis, you may focus on the value of  providing free, sterilized needles--which do indeed reduce disease, and also provide an opportunity for the health care provider distributing them to offer addiction treatment to the user. However, the free needles are sometimes discarded on the ground, posing a danger to others; or they may be shared; or they may encourage more drug usage. All of those things can be true at once; a reader will want to know about all of these considerations in order to make an informed decision. That is the challenging job of the white paper author.     
 The research you do for your white paper will require that you identify a specific problem, seek popular culture sources to help define the problem, its history, its significance and impact for people affected by it.  You will then delve into academic and grey literature to learn about the way scholars and others with professional expertise answer these same questions. In this way, you will create creating a layered, complex portrait that provides readers with a substantive exploration useful for deliberating and decision-making. You will also likely need to find or create images, including tables, figures, illustrations or photographs, and you will document all of your sources. 

South Asian Studies Librarian

Connect to a Librarian Live Chat or "Ask a Question"

• Librarians staff live chat from 9-5 Monday through Friday . You can also text to chat: 215-543-7674
• You can submit a question 24 hours a day and we aim to respond within 24 hours 
• You can click the "Schedule Appointment" button above in librarian's profile box (to the left), to schedule a consultation with her in person or by video conference.  
• You can also make an appointment with a  Librarian by subject specialization . 
• Connect by email with a subject librarian

Find more easy contacts at our Quick Start Guide

• Next: Getting started >>
• Last Updated: Sep 12, 2024 3:12 PM
• URL: https://guides.library.upenn.edu/c.php?g=1424358

Smoothing Out Momentum and Reversal

Swiss Finance Institute Research Paper No. 24-47

36 Pages Posted: 13 Sep 2024

Soros Chitsiripanich

University of zurich - department finance, marc s. paolella.

University of Zurich - Department Finance; Swiss Finance Institute

Pawel Polak

Stony Brook University-Department of Applied Mathematics and Statistics; Institute for Advanced Computational Science

Patrick S. Walker

University of Zurich, Department of Banking and Finance; OLZ AG

Date Written: August 30, 2024

We introduce new path-dependent constraints within a sequential portfolio optimization framework designed to reduce turnover in frequently rebalanced investment strategies, such as momentum and short-term reversal. This method classifies individual assets into distinct groups based on their attractiveness from signal and rebalancing perspectives, effectively managing the trade-off between anomaly-based predictability and the required trading volume for exploitation. These constraints function independently from the ℓ 1 portfolio turnover regularization, which manages reallocation at the aggregated portfolio level, proving more effective in enhancing net profitability. The combined turnover management mechanisms reduce the turnover of daily-rebalanced momentum and reversal portfolios by 95-99%, aligning closely with traditional monthly-rebalanced strategies. Furthermore, our method captures signals more promptly, resulting in more stable portfolios, a substantial reduction in maximum drawdown from 76-99% to 22-49%, and an improvement in risk-adjusted net returns by 38-149%, all under realistic transaction cost assumptions.

Keywords: Fractional Differencing, Momentum Crashes, Momentum Factor, Portfolio Optimization, Regularization, Reversal Strategy

JEL Classification: C32, C53, C61, G11, G17

Suggested Citation: Suggested Citation

University of Zurich - Department Finance ( email )

Plattenstrasse 14 Zürich, 8032 Switzerland

Plattenstr. 14 Zürich, 8032 Switzerland

Swiss Finance Institute

c/o University of Geneva 40, Bd du Pont-d'Arve CH-1211 Geneva 4 Switzerland

Pawel Polak (Contact Author)

Stony brook university-department of applied mathematics and statistics ( email ).

Stony Brook University Stony Brook, NY 11794 United States

Institute for Advanced Computational Science ( email )

100 Nicolls Rd Mailstop 5250 Stony Brook, NY 11794 United States

HOME PAGE: http://https://sites.google.com/view/pawelpolak/

University of Zurich, Department of Banking and Finance ( email )

Plattenstrasse 14 Zürich, CH-8032 Switzerland

HOME PAGE: http://www.bf.uzh.ch/

OLZ AG ( email )

Gessnerallee 38 Zurich, Zurich 8001 Switzerland

Do you have a job opening that you would like to promote on SSRN?

Paper statistics, related ejournals, swiss finance institute research paper series.

Subscribe to this free journal for more curated articles on this topic

Wealth Management eJournal