find a phd imperial college

Imperial College London Imperial College London

Looking for funding?

Use our scholarships search tool to look for available scholarships. Also explore our latest funded PhD vacancies , and our international scholarship collaborations .

PhD study is offered across the College.

To search for opportunities based on your own research idea you first need to identify a research group whose objectives best match your idea.

If you find a suitable group, you normally need to identify a potential supervisor before submitting an application. This is an important step, as you will need to find out whether they have an appropriate supervisor . You also need to discuss your research ideas before you apply.

Use the links under ' Find PhD opportunities ' below to identify the different opportunities within research groups in our academic departments and multidisciplinary Centres and Institutes.

Read more about our Doctoral study experience so you know what to expect.

Studentships

If you don't have a particular research idea that you're looking to pursue, we recommend searching our current fellowships and studentships. These are PhD projects in specified areas for which funding has already been granted to Imperial.

Browse the latest fellowship and studentship vacancies .

You may also be eligible for one of our integrated PhDs , which are covered by funded studentships.

Split PhD scheme

Our Split PhD scheme allows you to carry out some of your research abroad, either in the field or at an overseas institution. Find out more about our split PhD scheme .

Partner Research Institution (PRI) Scheme

If you work in a public research institution, industrial research laboratory or at another university then you may be able to register for a PhD at Imperial but carry out the research where you work . Find out more about the PRI scheme and how to apply.

Find PhD opportunities

Use the links below to search the different PhD opportunities within our academic departments, centres and institutes. O ur interdisciplinary approach means our expertise often spans departmental boundaries – and so do our courses – so you may find opportunities in an unexpected area of the College.

Faculty of Engineering

Aeronautics
Bioengineering
Chemical Engineering
Civil and Environmental Engineering
School of Design Engineering
Earth Science and Engineering
Electrical and Electronic Engineering
Mechanical Engineering

Faculty of Medicine

Department of Brain Sciences
Department of Immunology and Inflammation
Department of Infectious Disease
Department of Metabolism, Digestion and Reproduction
Department of Surgery and Cancer
Institute of Clinical Sciences
National Heart and Lung Institute
School of Public Health

Faculty of Natural Sciences

Life Sciences
Mathematics
Centre for Environmental Policy

Imperial College Business School

Doctoral programme

Centre for Languages, Culture and Communication

PhD in Arabic, German, Italian, Russian and Spanish Studies
PhD in science communication studies

Global Challenge institutes

We have six Global Challenge institutes, which were created to address some of society's biggest challenges.

If you have an idea for a PhD that falls within the remit of one of our Global Challenge institutes please contact them directly to discuss before making a formal application to the College.

Data Science Institute
Grantham Institute – Climate Change and the Environment
Institute for Molecular Science and Engineering
Institute for Security Science and Technology
Institute of Global Health Innovation

Energy Futures Lab does not offer PhD programmes, but does deliver the MSc in Sustainable Energy Futures .

Joint Academy of Doctoral Studies | Imperial College London-Technical University of Munich

We have recently formed a strategic partnership in education, research and innovation with the Technical University of Munich, one of Germany’s most international and entrepreneurial universities, producing highly ranked research, like Imperial, in science, engineering and medicine.

As part of the partnership, Imperial and TUM have launched a ' Joint Academy of Doctoral Studies' with the aim of co-developing cross-disciplinary clusters of PhD students who will have access to world-leading academic supervisors and state-of-the art facilities at both institutions.

The first round of the programme will focus on the theme of 'Artificial Intelligence, Healthcare and Robotics'.

Find out more about the Joint Academy of Doctoral Studies and apply

Note: Your browser does not support javascript or you have javascript turned off. Although this will not affect your accessibility to the content of this site, some of the advanced navigation features may not be available to you.

Note: Some of the graphical elements of this site are only visible to browsers that support accepted web standards . The content of this site is, however, accessible to any browser or Internet device.

» Resources for Staff & PhD students

PhD/MPhil Research Degrees

Introduction.

The Department of Computing at Imperial College is a leading department of computer science among the UK universities and offers an exciting research environment for prospective postgraduate students. It has consistently been awarded the highest research rating (5*) in Research Assessment Exercises, including the most recent one held in 2001, and was rated as "Excellent" in the previous national assessment of teaching quality.

Two research degree programmes are offered, one leading to the MPhil degree and the other to the PhD degree. All students are initially registered for MPhil but may transfer to the PhD programme if their progress is satisfactory. The programmes may be followed in either full-time or part-time modes, for which the minimum periods of registration are two or three calendar years, respectively. The time taken for a full-time student to complete the PhD programme is normally expected to be three years from the date of initial registration.

Financial Support

The funding details are different for UK, European and Overseas students.

UK students, students eligible for EPSRC funding

Each year the Department has a number of EPSRC-DTA studentships which are awarded to suitably qualified research students. These pay for the fees and bursary.

Fees: £3,010 per year Bursary: £13,200 per year

European Students

The current situation is that the Department has some scholarships to fund the fees for suitably qualified European students (this typically includes citizens from countries that joined the EU on 1 May 2004). The student or supervisor has to find the funding for the bursary. It is not likely that this situation will change in the foreseeable future.

Fees: £3,010 per year Bursary: £13,200 per year (for EU students that fulfill "residency" requirements)

Overseas Students

There are national scholarships for overseas students, called ORS awards, which cover the difference between the overseas fees (£10,850) and the home fees (£3,010). These awards are prestigious and competitive. The student or supervisor has to find the funds for the remainder of the fees and the bursary. To ensure eligibility for these awards, please apply as early as possible, e.g. in early November for the competition of the subsequent year. ORS poster and the ORS booklet for further details. We no longer can accept ORS and LEE applications for 2005. --> Please refer to the 2005 Guidelines for the ORS Awards Scheme.

Scholarships

Please see Scholarships and Awards for other funding opportunities, in particular the Dorothy Hodgkin Postgraduate Awards. Through its Industrial Liaison Unit, the Department is able to offer enhanced PhD scholarships to selected students. These are supported through generous donations from industrial sponsors. They are allocated early in the first year of study and are tenable for up to 3 years and renewed on an annual basis. The criteria for award and financial value differ between scholarships and are publicised at the start of the selection process.

This years Deutsche Bank PhD scholarship has been awarded to Henry Styles, who graduated with a First from our department and is now studying for a PhD under Wayne Luk's supervision.

This year's Microsoft scholarship will be shared between Tyrone Grandison, supervisor Morris Sloman, and Ioannis Xanthakos, supervisor Fariba Sadri.

Please note that the Department does not provide funding for either tuition fees or maintenance. There are sometimes Scholarships available through the Department, College, or individual supervisors. ORS poster and the ORS booklet , and information on the Lee Scholarship . --> Opportunities for Fellowships, Teaching Assistantship (TA) and Research Assistantship (RA) posts are not that frequent and you would need to refer to www.doc.ic.ac.uk/about/situationsvacant/ on a regular basis to see what (if anything) is available.

How to Apply

The Department welcomes new applications from all suitably qualified candidates. Applicants are required to have a good Honours MSc degree or equivalent degree in Computer Science, Mathematics or some IT-related discipline. Candidates who have a BSc degree only will not be considered. Additionally, applicants need to demonstrate strong research potential. Where appropriate, we may encourage applicants to register first for the MSc in Advanced Computing and then, upon successful completion of this, to apply for registration for a research degree. The MSc course includes special research-oriented provisions for students intending to take this route.

We strongly advise you to first read

and the College admissions policy www.ic.ac.uk/P1332.htm

before sending our PhD Admissions Team any questions by email phdadmissions "at" doc.imperial.ac.uk or Cristina Novakovic using cmn "at" doc.imperial.ac.uk. Please read item 4 carefully to assess whether your achievements would meet the college's expectations. Strong candidates increase their change of acceptance or facilitate the processing of their application by

indicating in their application general research topics of interest and the research groups or --> supervisors under which they would like to carry out their PhD work.

If you have any problems accessing electronic information regarding taught postgraduate degrees please email the Postgraduate Admissions Secretary Mrs. Barbara Claxton or write to:

The Assistant Registrar (Admissions), Imperial College London, SW7 2AZ.

We no longer can accept ORS and LEE applications for 2006. ORS poster and the ORS booklet . -->

Applicants with Disabilities

Imperial College London Imperial College London

Current PhD studentships

Explore the drop down lists below to find out more about current PhD studentships.

Accordion widget

Phd studentship in acl injury prevention and return to sport in elite female footballers (prof andrew amis).

Supervisor: Professor Andrew Amis

Deadline for applying: 30 June 2024

Applications are invited for a research studentship in the field of Female ACL injury in Elite Football leading to the award of a PhD degree. The post is supported by a bursary and fees (at the UK student rate) provided by the Football Association.

The project will be managed jointly by The Football Association (FA) and Imperial College (IC) with expert surgical input from Fortius Clinic, London. The work will largely be ‘in the field’ with a base at the Biomechanics research group at IC’s South Kensington campus.

It is expected that the project will entail development and use of in-depth evaluation methods that can be used with identified players and the participating clubs to understand current training methods, development pathways and physical development programmes and their relation to ACL injury, to document histories of those who have been injured and to evaluate post-injury treatment/rehabilitation methods and the long-term outcomes in terms of return to play at elite level. This work will lead to evidence-based recommendations for injury prevention and return to sport for the women’s professional game in England. It is expected that this project will identify key modifiable risk factors, leading to improvements in training/rehabilitation methods which can be widely implemented to help improve outcomes for players throughout the women’s game.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will have a 1st class honours degree or similar qualification in Physiotherapy, Sports Science, Medicine or a related subject, and an enquiring and rigorous approach to research together with a strong intellect and disciplined work habits. An interest in sports medicine is essential. Good team-working, observational and communication skills are essential.

To find out more about research at Imperial College London in this area, go to:

https://www.imperial.ac.uk/mechanical-engineering/research/

For information on how to apply, go to:

http://www.imperial.ac.uk/mechanical-engineering/study/phd/how-to-apply/

For further details of the post contact Prof Andrew Amis: [email protected] , +44 (0)7722 225409. Interested applicants should send an up-to-date curriculum vitae and statement of motivation to Prof Amis. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be addressed by College Registry. The project is pending contractual confirmation, but we hope the successful candidate will be able to start in the next few months once contracts are finalised.

Closing date: 30 th June 2024

PhD Studentship in Additive Manufacturing – In-situ process monitoring (Dr Paul Hooper and Dr Catrin Davies)

Supervisors: Paul Hooper, Catrin Davies

Deadline for applying: 31 January 2024

Applications are invited for research studentships in the field of additive manufacturing leading to the award of a PhD degree. The posts are supported by bursary and fees (home fee status).

Additive manufacturing (AM) technologies have a promising list of potential benefits for low to medium volume manufacture. Understanding the structural integrity of AM components is key to their increased use in high performance and safety critical applications. This PhD project, sponsored by Renishaw plc, will focus on developing new in-situ process monitoring and control strategies to both monitor and improve build quality of metal components made via selective laser melting. The PhD is part of a wider project focusing on accelerating the quality assurance of additively manufactured parts using in-process monitoring data and machine learning. The research will be performed using Imperial’s new AM facility (that includes four laser powder bed fusion machines, 2 x Renishaw AM250, an Aconity Midi and a Concept MLab), world class materials characterisation and test facilities and high performance computing systems.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will have a first or upper second honours degree in engineering, physics, computing or a related subject, and an enquiring and rigorous approach to research together with a strong intellect and disciplined work habits. Applicants should have an interests in one or more of additive manufacturing, image processing, sensing machine learning, real-time control systems, welding and metallic materials. A passion for engineering, demonstrated by extra-curricular activities or industrial experience is also desirable. Good team-working, observational and communication skills are essential.

For further details of the post contact Dr Paul Hooper ( [email protected] ) or Dr Catrin Davies ( [email protected] ). Interested applicants should send an up-to-date curriculum vitae and cover letter to Dr Hooper on the above e-mail address. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be addressed by College Registry.

Closing date: 31 st Jan 2024

PhD Studentship in Additives for EV Lubrications (Dr Janet Wong)

Supervisor: Janet Wong

Applications are invited for a research studentship in the field of Additives for EV lubrications leading to the award of a PhD degree. The post is supported by a bursary and fees (at the UK student rate) provided by Shell UTC. To be eligible for support, applicants must be “UK Residents” as defined by EPSRC.

This project is a part of a large effort for our zero transition initiatives. Our goal is to design the best coolant and lubricant for EV through a fundamental understanding on how we may control the behaviour of additives under the influence of an electric field. This has a direct impact on the performance and reliability of EV. Ultimately, we aim to revolutionise lubricant technology by creating smart, responsive lubricants that can lubricate on demand!

In this experimental project, the PhD researcher will examine how an application of an electric field affects the behaviour of various additives. This will involve both fundamental and applied studies. The researcher will design experimental setup that allows various additives properties to be measured in situ and in real time during rubbing. This will allow a direct correlation between additive behaviour and tribological performance of a lubricant. The project will also be supplemented using other techniques, include advanced laser spectroscopies, and various surface and chemical characterisation techniques.

This project will be based at Imperial College with regular interaction with our project partners. The PhD researcher will be a part of the Shell UTC and the Tribology Group. It offers a vibrant, multidisciplinary and multicultural working environment. Laboratories were recently refurbished and are well equipped with an extensive range of instrumentation and extensive computer facilities.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will hold, or be expected to achieve, a Master’s degree or a 4-year undergraduate degree at 2:1 level (or above) in a relevant subject, e.g. Chemical or Mechanical Engineering, Materials, Chemistry, Physics or a related field. You will have an enquiring, rigorous and hands-on approach to research, together with a strong intellect and disciplined work habits. An interest in experimental work and development is essential, as are good team-working, observational and communication skills.

http://www.imperial.ac.uk/mechanicalengineering

For further details of the post contact Dr Janet Wong ( [email protected] ). Interested applicants should send an up-to-date curriculum vitae. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be addressed by College Registry.

Closing date: until post filled

PhD Studentship in Battery Fire Safety (Dr Huizhi Wang)

Supervisors: Huizhi Wang, Guillermo Rein

Deadline for applying: until post filled

Applications are invited for a research studentship in the field of energy storage, leading to the award of a Ph.D. degree. The focus will be on advancing fundamental understanding of thermal and fire hazards of lithium-ion batteries, which will underpin the development of safety control strategies and countermeasures for lithium-ion batteries. The post is supported by full bursary and fees at the UK student rate for ‘home’ students.

https://www.imperial.ac.uk/study/pg/apply/fees/fee-status/

Project Description

Lithium-ion batteries play an important role in advancing the electrification of road transport and facilitating a swift transition towards renewable energy sources. Although they are generally stable under normal conditions, lithium-ion batteries are inherently flammable and susceptible to thermal runaway when exposed to abuse or internal defects. As the demand for lithium-ion batteries continues to soar, understanding their thermal and fire hazards throughout their lifecycle has become imperative.

This research aims to contribute fundamental insights into the intricate interplay between battery cycling conditions and thermal and fire hazards. The research will involve the coupling of a cutting-edge battery electrochemical model with an advanced thermal runaway model, which will be parameterised and validated using experimental data. The project outcomes will lay a scientific foundation for enhancing safety of future energy storage systems.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will hold, or be expected to achieve, a Master’s degree or a 4-year undergraduate degree at 2:1 level (or above) in a relevant subject, e.g. Chemical or Mechanical Engineering, Materials, Chemistry, Physics or a related field. You are expected to have an enquiring and rigorous approach to research, complemented by a strong intellect and disciplined work habits. A willingness to work on both computations and experiments, with excellent teamwork and communication skills, is essential.

https://www.imperial.ac.uk/electrochem-sci-eng/

https://www.imperial.ac.uk/hazelab/

For further details of the post, please contact Dr Huizhi Wang, [email protected] . Interested applicants should send an up-to-date curriculum vitae to Dr Huizhi Wang. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be addressed by College Registry.

AHRC Collaborative Doctoral Partnership (CDP) studentship – Conservation of Metal Surfaces with English Heritage (Dr Marc Masen)

Supervisor: Dr Marc Masen

Deadline for applying: 19 May 2024

Start date : 1st October 2024

Interviews will take place on 24 May 2024

Imperial College London and English Heritage are pleased to announce the availability of a fully funded Collaborative doctoral studentship [from October 2024] under the AHRC’s Collaborative Doctoral Partnerships (CDP) scheme

The project will focus on understanding the deterioration and corrosion of metal parts and exhibits in museums, with the purpose of defining a long-term mitigation strategy.

This project will be jointly supervised by Dr Marc Masen (Imperial College London) and Dr David Thickett (Senior Conservation Scientist, English Heritage) with support from Finn Giuliani and Mary Ryan at Imperial College London and Martin Allfrey (Senior Curator of Collections (West)) at English Heritage and the student will be expected to spend time at both Imperial College London and English Heritage, as well as becoming part of the wider cohort of CDP funded students across the UK.

The studentship can be studied either full or part-time.

We encourage the widest range of potential students to study for this CDP studentship and are committed to welcoming students from different backgrounds to apply. We particularly welcome applications from Black, Asian, Minority, Ethnic (BAME) backgrounds as they are currently underrepresented at this level in this area.

Students should have a Master’s Degree in a relevant subject or can demonstrate equivalent experience in a professional setting.

The studentship is open to both home and international applicants.

Project Overview

Heritage objects are often displayed under non-ideal environmental conditions. A prime example within English Heritage are the tools historically used in production at the J.W. Evans Silver factory in Birmingham. These artefacts are susceptible to degradation due to wear and corrosion, and this project aims to provide a solution. We aim to identify and understand historic and current protective measures by a combination of archival, patent and literature research as well as interviews with craftspeople and experts.

Research questions include:

How can the topology and composition of existing substances on the surface be characterised?
Can we prevent metal artefacts from degradation, whilst these artefacts are kept on display and being used in demonstrations?
How to summarise this knowledge into evidence-based pragmatic guidelines?

Research with English Heritage

This research studentship is one allocated to Dr Masen at Imperial College London by the AHRC to support the work of Dr David Thickett at English Heritage. The successful student will be expected to spend time carrying out research and gaining relevant experience with the partner in London, as well as at the JW Evans site in Birmingham as part of the studentship.

Details of Award

CDP doctoral training grants fund full-time studentships for 4 years or part-time equivalent up to a maximum of 6 years.

The award pays tuition fees up to the value of the full-time home UKRI rate for PhD degrees. Research Councils UK Indicative Fee Level for 2023/2024 is £ 4,786 *

The award pays full maintenance for all students both home and international students. The UKRI National Minimum Doctoral Stipend for 2023/2024 is £19,237, plus London Weighting of £2000/year plus a CDP maintenance payment of £600/year.

The student is eligible to receive an additional travel and related expenses grant during the course of the project courtesy of English Heritage worth up to £1,000 per year for 4 years.

The successful candidate will be eligible to participate in events organised for all Collaborative Doctoral Partnership students who are registered with different universities and studying with cultural and heritage organisations across the UK.

Eligibility

This studentship is open to both Home and International applicants.
To be classed as a home student, candidates must meet the following criteria:
Be a UK National (meeting residency requirements), or
Have settled status, or
Have pre-settled status (meeting residency requirements), or
Have indefinite leave to remain or enter

Further guidance can be found here - https://www.ukri.org/wp-content/uploads/2021/02/UKRI-030221-Guidance-International-Eligibility-Implementation-training-grant-holders-V2.pdf

International students are eligible to receive the full award for maintenance as are home students. For international students, the Department of Mechanical Engineering will waive the difference between the home and international tuition fee.

We want to encourage the widest range of potential students to study for a CDP studentship and are committed to welcoming students from different backgrounds to apply. We particularly welcome applications from Black, Asian, Minority, Ethnic (BAME) backgrounds as they are currently underrepresented at this level in this area.
Applicants should ideally have or expect to receive a relevant Masters-level qualification in a relevant subject [Materials Science and Engineering, Mechanical Engineering, Chemistry or Conservation Science], or be able to demonstrate equivalent experience in a professional setting.
Applicants must be able to demonstrate an interest in the Conservation Science sector and potential and enthusiasm for developing skills more widely in related areas.
As a collaborative award, students will be expected to spend time at both Imperial College London and English Heritage.
All applicants must meet UKRI terms and conditions for funding. See:

https://www.ukri.org/funding/information-for-award-holders/grant-terms-and-conditions/

Project details and how to apply

For more information and how to apply see http://www.imperial.ac.uk/mechanical-engineering/study/phd/how-to-apply/

PhD Studentship in Development of a vibration management concept for gas turbine engines (Dr Christoph Schwingshackl)

Supervisor: Christoph Schwingshackl

Applications are invited for a research studentship in the field of future aeroengine technology, leading to the award of a PhD degree. The post is supported by a bursary and fees (at the UK student rate) provided by the EPSRC, with a generous bursary top-up from industrial funds. EPSRC candidates should fulfil the eligibility criteria for the award.

The design of efficient and safe next generation gas turbines requires among other things a reliable control of rotor vibrations to prevent a rapid loss of structural integrity during operation. Future engine designs require novel vibration management concepts that can replace conventional rotor damping solutions, such as squeeze film dampers (SFDs). This PhD research aims to deliver such a novel vibration management mechanism that shall be scalable, weight efficient and capable of operating across a wide frequency and load ranges (from normal vibration to extreme fan-blade-off loads) in a safety critical aerospace environment. The aim thereby is to research different potential energy absorption approaches (eg. the use of structural non-linearity, smart materials, topology optimisation, …), evaluate their potential with respect to shaft damping in turbo machinery, provide the physical understanding and numerical tools to analyse, predict, select, optimise and design a novel shaft damping solution, and demonstrate the designs feasibility with a simple proof of concept setup on a laboratory rig. The student will be a member of a Vibration UTC, funded by Rolls-Royce 35 years ago with a long demonstrable history of delivering state of the art research and producing world-class specialists both for industry and academia. The candidate will have the opportunity to an internship at Rolls-Royce during their PhD.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will have a 1st class honours degree in mechanical engineering or a related subject, and an enquiring and rigorous approach to research together with a strong intellect and disciplined work habits. An interest in numerical and experimental dynamic techniques is essential. Good team-working, observational and communication skills are essential.

To find out more about this PhD opportunity, go to:

https://youtu.be/KasvTVxkWPc

or https://www.imperial.ac.uk/dynamics/research/structural-dynamics/

For further details of the post contact Dr Christoph Schwingshackl [email protected] . Interested applicants should send an up-to-date curriculum vitae to Dr Schwingshackl. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be addressed by College Registry.

PhD Studentship in the Development of Novel Lubricating Fluids for the Next Generation of Electric Vehicles (Dr Amir Kadiric)

Supervisor: Dr Amir Kadiric

Applications are invited for a research studentship in the development of novel lubricating fluids for application in drivetrains of passenger electric vehicles (EVs), leading to the award of a PhD degree. This is a fully funded iCASE PhD studentship in collaboration with a major premium passenger vehicle manufacturer. The studentship covers a tax-free bursary of around £27,000 per annum, full tuition fees, and all project costs. The studentship is available to suitably qualified UK and overseas candidates.

Effective lubrication of electric vehicle drive units presents unique challenges in terms of lubricant formulation. An EV drive unit lubricating fluid is required to provide adequate protection to gear and bearing surfaces under high torque – low speed operating conditions, while minimising churning losses at high speeds and low torques. The former requires a high viscosity fluid and the latter a low viscosity one. Furthermore, in most modern EVs the same fluid is used to lubricate the gearbox and to cool the e-motor, which imposes additional requirements on the EV fluid of having a high specific heat capacity and suitable copper compatibility. Although traditional hydro-carbon based oils may excel in some of these aspects, such as offering superior surface protection, they may no longer offer the optimum combination of properties to adequately satisfy this whole set of requirements.

This project aims to help develop new EV drivetrain fluids to address these competing requirements. In particular, we will explore how best to balance fluid’s cooling capability with its lubricating performance. To achieve this, the work will explore tribological performance of several unconventional lubricants, including for example, water-based ones. The key benefits of a water-based lubricant in EV drive train applications are its superior cooling performance, which can offer potential benefits in e-motor efficiency, and lower transmission losses at higher vehicle speeds. However, water-based fluids are generally poor lubricants compared to conventional oils; this is due to their inferior hydrodynamic film forming abilities, caused by low viscosity and low pressure-viscosity coefficient, as well as inferior tribofilm formation under low speeds. The project will explore the tribological behaviour of these and other candidate fluids, with the aim of producing practical guidance on potential fluid formulations for optimum efficiency and reliability of electric drive units in passenger EVs.

The successful candidate will have regular opportunities to present their work at major international conferences in Europe, USA and Japan, and will be expected to publish the results of this research through a series of journal papers. They will also closely communicate with the industrial partners on this project, including visiting their research facilities.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will have a good degree in Mechanical Engineering, Chemical Engineering, Physics or a related subject, with at least a 2:1 equivalent degree classification. Your past studies and experiences will demonstrate a rigorous approach to research, disciplined work habits and an enquiring mind. Good written and oral communication skills are essential.

Interested applicants should send an up-to-date curriculum vitae to Dr A Kadiric, [email protected] or Dr J Shore, [email protected] as a first step. Suitable candidates will be required to complete an electronic application form available on Imperial’s website in order for their qualifications to be assessed by College Registry.

Contribute to the Clean Energy Transition: PhD Studentship in the Effects of Hydrogen on the Performance of Machine Elements (Dr Amir Kadiric)

Applications are invited for a research studentship in the effects of hydrogen on the performance of machine elements, leading to the award of a PhD degree. The studentship is fully funded through a research agreement with our industrial partners, a large multinational company, and covers a tax-free bursary of around £27,000 per annum, full tuition fees, and all project costs. The studentship is available to suitably qualified UK and overseas candidates.

Hydrogen is playing an important role in the global efforts for clean energy transition. Its most obvious uses are in fuel cells and hydrogen combustion engines, but hydrogen is also increasingly used in industry, for example, in green steel production. However, storage, transport and use of hydrogen present unique challenges in ensuring reliability of machine components which may be exposed to hydrogen at some point in their life cycle. One known issue is the phenomenon of hydrogen embrittlement of steels, where permeation of hydrogen into the steel matrix adversely affects steel mechanical properties and hence increases the risk of failure. Machine elements, such as bearings and gears, are important examples of engineering components that are believed to be susceptible to hydrogen embrittlement. It has been postulated that hydrogen can diffuse into the rubbing steel surfaces of these components and consequently, accelerate the initiation and/or propagation of contact fatigue cracks. One example where this phenomenon has been suggested to be of significance are wind turbine drive trains, many of which experience mechanical failures much earlier than predicted by conventional theories. To help address some of the relevant questions, this project will make use of world-unique analytical and test equipment to systemically investigate the potential influence of hydrogen on damage and failure in lubricated rolling-sliding contacts of hard steels, representative of those found in machine elements such as bearings and gears. The results of this project are of practical significance in the design and operation of wind turbines, fuel cells, and many other mechanical systems across automotive, industrial and energy sectors.

The project will utilise existing test equipment available in the Tribology Group at Imperial, including the triple-disc contact fatigue rig and ball-on-disc tribometers, to systematically evaluate the initiation and progression of surface damage in lubricated rolling-sliding contacts under conditions that may promote uptake of hydrogen by the rubbing steel surfaces. A selection of lubricants and steels will be included in the study. Crucially, the tested specimens will then be analysed using a world-unique analytical set-up, referred to as ‘cryo atom probe’, available at Imperial that is designed to detect and locate atomic hydrogen within the steel matrix. Historically, the primary issue with studying hydrogen embrittlement of steels has been the inability to observe mobile hydrogen atoms within the steel specimens. The standard techniques, such as TDA, that are commonly used to assess the amount of hydrogen in a test specimen, are only able to provide a measure of the total hydrogen content in the sample, but do not provide the key information on the location of the hydrogen atoms within the matrix and do not distinguish between the trapped, and hence largely inconsequential, hydrogen, and the potentially damaging mobile hydrogen. The cryo-atom probe overcomes this, and other, limitations by keeping the test sample under cryo conditions from the moment it is removed from the test chamber through every stage of analysis, including FIB, SEM, TEM and atom probe itself as needed. This facility has only recently become available through a multi-million-pound investment supported by public and industrial funding. This set of experiments will enable us to (i) conclusively confirm whether hydrogen permeates into the rubbing steel surfaces under any given contact conditions and lubricants, (ii) establish any preferred locations where the hydrogen migrates within the steel matrix, for example, the vicinity of a fatigue crack tip, and (iii) link these observations to the mechanisms of any surface damage observed in the initial tests. Given the unique set of cutting-edge testing and analytical equipment available to this project, it is hoped that this research will provide ground-breaking insights on the effects of hydrogen on the performance of tribological contacts with far reaching impact across multiple applications.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will have a good degree in Mechanical Engineering, Chemical Engineering, Physics or a related subject, with at least a 2:1 degree classification. Your past studies and experiences will demonstrate a rigorous approach to research, disciplined work habits and an enquiring mind. Good written and oral communication skills are essential.

Interested applicants should send an up-to-date curriculum vitae to Dr A Kadiric, [email protected] or Dr J Shore, [email protected] as a first step. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be assessed by College Registry.

PhD studentship in High-fidelity modelling of clad ballooning during a loss-of-coolant accident (Dr Mike Bluck)

Supervisors: Dr Michael Bluck (Mechanical Engineering), Dr Mark Wenman (Materials)

Applications are invited for a PhD research studentship in the field of high-fidelity modelling of clad ballooning in nuclear reactor loss-of-coolant accidents. The post is supported by a bursary and fees (at the UK/EU student rate) provided by the EPSRC and the National Nuclear Laboratory (NNL). Candidates should fulfil the eligibility criteria for the award. Please check your suitability.

T he loss-of-coolant accident (LOCA) is generally the limiting design-basis accident in a LWR. In the event of such an accident, the fission chain reaction is automatically shutdown, however there remains ‘decay heat’ generation, perhaps 7% of operating power, for some hours following the accident. Removal of this decay heat requires that sufficient coolant can be brought into the core, and that the core, during this time, retains a "coolable geometry". This is not guaranteed - excessively hot, internally pressurised fuel pins can deform - so called ‘clad ballooning’ - and possibly form blockages to the flow.

A major focus of the reactor safety case is therefore to ensure that the consequences of a LOCA are manageable. To do so, we must understand and model both the complex mechanical behaviour of the fuel and outer cladding, and the coolant flow over the fuel pins. Indeed, these effects are strongly interdependent.

The aim is to develop a state-of-the-art computer code system to predict the 3-D clad ballooning behaviour of rods in a light water reactor (LWR) fuel bundle during a loss-of-coolant accident (LOCA). The code system will involve the dynamic coupling of a state-of-the-art 3-D fuel rod performance code with a state-of-the-art 3-D thermal-hydraulics code, will be validated using experimental data, and will be demonstrated for an LWR fuel assembly.

The position is a collaboration between the Nuclear Engineering Group within the Mechanical Engineering Department and the Engineering Alloys Group within the Department of Materials. This PhD is funded by the UKRI/EPSRC and the UK National Nuclear Laboratory (NNL).

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will have a 1st class or 2:1 honours degree in mechanical engineering or a related subject, and an enquiring and rigorous approach to research together with a strong intellect and disciplined work habits. An interest in fracture mechanics is essential. Good team-working, observational and communication skills are essential.

Find out more about research at Imperial College London in this area:

Department of Materials

More information on how to apply

Interested applicants should send an up-to-date curriculum vitae to Dr Michael Bluck, [email protected]. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be addressed by College Registry.

Closing date: until post filled

Imperial Managers lead by example. Committed to equality and valuing diversity. We are also an Athena SWAN Silver Award winner, a Stonewall Diversity Champion, a Two Ticks Employer, and are working in partnership with GIRES to promote respect for trans people.

PhD Studentship in High-Rate Fracture of Forged and 3D-printed Metallic Alloys (Dr Paul Hooper)

Supervisor: Dr Paul Hooper

Deadline for applying: 30 September 2021

Applications are invited for a research studentship in the field of fracture and high strain-rate materials characterisation, leading to the award of a PhD degree. The post is supported by a bursary and fees (at the UK/EU student rate) provided by AWE plc.

This PhD project aims to advance our understanding of the influence of strain rate and sample size on the fracture toughness of nuclear grade A508 forged steel and 3D printed Ti-6Al-4V manufactured through laser powder bed fusion. Strain rate is known to affect the mechanical properties of alloys, especially the yield strength and fracture toughness. Conventional fracture toughness methods used under quasi-static loading, such as pausing and unloading tests at predefined displacements do not work at high-speed. This leads to uncertainty in predicting the structural integrity of structures which may experience high speed loading scenarios in service. In this PhD you will develop innovative high-speed experimental methods to overcome the limitations of the established quasi-static approach. This will include the design and development of a method to load a compact tension (CT), or single edge notch bend (SENB) specimen, at high-speed (>10 m/s) to a fixed displacement to prevent the specimen fully fracturing into 2 pieces. You will learn to use high-speed photography and apply techniques to measure sample deformation. Alongside the experimental aspects of this project, you will also develop finite element models and analytical techniques to gain further insight into the results obtained. You will also have the opportunity to travel to and present your work at international conferences.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will have a 1st class or 2.1 honours degree in mechanical engineering or a related subject, and an enquiring and rigorous approach to research together with a strong intellect and disciplined work habits. Practical engineering, problem-solving and computational abilities are key skills for this PhD project. Good team-working, observational and communication skills are essential.

http://www3.imperial.ac.uk/mechanicalengineering

For further details of the post contact Dr Paul Hooper [email protected] or Dr Catrin Davies [email protected] . Interested applicants should send an up-to-date curriculum vitae to Dr Paul Hooper. Suitable candidates will be required to complete an electronic application form for their qualifications to be addressed by College Registry.

Closing date: 30 th September 2021

PhD Studentship in High-strain Rate Tensile Testing of Soft and Energetic Materials (Dr Paul Hooper)

Supervisor: Dr Paul Hooper

Deadline for applying: 30 September 2021

Applications are invited for a research studentship in the field of high strain-rate materials characterisation, leading to the award of a PhD degree. The post is supported by a bursary and fees (at the UK/EU student rate) provided by AWE plc.

This PhD project aims to develop innovative experimental methods to measure the stress-strain response of soft materials at high strain-rates. Although the testing of metallic samples under these conditions is fairly mature, measuring the properties of softer materials (such as organic materials and polymer bonded explosives) is much more challenging. Dynamic loading of soft materials is challenging due mismatch in stiffness between the samples and loading fixture. Even holding the sample in place can be difficult due to their low stiffness and tendency to deform under their own weight. These difficulties can give rise to large uncertainties in measurements of mechanical properties in soft materials, especially in non-compressive loading. In this PhD you will advance the state-of-the-art to overcome these limitations through the development of novel dynamic testing equipment at strain-rates of 1,000/s (faster than a car crash) and above. The approach taken will be a miniaturised Split Hopkinson Pressure Bar (SHPB) design that will enable testing of soft materials that are difficult to prepare into test specimens and introducing a high level of automation into the test procedure to reduce or eliminate operator variability. You will learn to use high-speed photography (think The Slow Mo Guys ) to measure sample deformation and investigate the effects connection arrangement between the loading bars and sample. You will also have the opportunity to develop finite element models to further our understanding of testing these materials at high-strain rates and to travel and present your work at international conferences.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will have a 1st class or 2.1 honours degree in mechanical engineering or a related subject, and an enquiring and rigorous approach to research together with a strong intellect and disciplined work habits. Practical engineering and problem-solving abilities are key skills for this PhD project. Good team-working, observational and communication skills are essential.

For further details of the post contact Dr Paul Hooper [email protected] . Interested applicants should send an up-to-date curriculum vitae to Dr Paul Hooper. Suitable candidates will be required to complete an electronic application form for their qualifications to be addressed by College Registry.

PhD Studentship in in-process evaluation of battery electrodes (Bo Lan)

Supervisor: Dr Bo Lan

Applications are invited for a research studentship in the field of in-process evaluation of battery electrodes, starting from Oct 2024 onwards and leading to the award of a PhD degree. The post is supported by a bursary and fees provided by the Department of Mechanical Engineering. UK students are prioritised but overseas students will be considered too.

The research involves development and validation of novel NDE methodologies for characterising the physical properties of battery electrodes, during and after the manufacturing processes of drying and calendaring. Aimed at reducing the currently very-high scrap rates in gigafactories around the world – thus could lead to significant economic values - the research will develop a comprehensive framework to describe, simulate, and experimentally acquire and interpret guided ultrasound propagating along the porous-solid-porous electrode structures. This will enable in-depth investigations on the structural properties of the electrodes, e.g. the polymer setting mechanisms during drying, which will be combined with destructive adhesion testing for validation, e.g. on the flexible-arm peel test developed within the department. Strategies for improvement and closed feedback loop will then be assessed and employed, based on the deficiencies found. We will also study the accelerated degradation in use, caused by adhesion issues of the multilayer electrodes, and tune the NDE techniques to detecting such defects at the manufacturing stage. It will be a collaboration between the NDE and Adhesion/Adhesive groups, which are both world leaders in their respective research areas.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will have a 1st class honours degree in mechanical engineering or a related subject, and an enquiring and rigorous approach to research together with a strong intellect and disciplined work habits. An interest and good skills in experimental work are essential, so are good team-working, observational and communication skills.

For further details of the post contact Dr Bo Lan ( [email protected] ). Interested applicants should send an up-to-date curriculum vitae to Dr Lan. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be addressed by College Registry.

PhD Studentship in Laser processing of challenging materials (Dr Iuliia Tirichenko, Dr Fred Cegla)

Supervisors: Iuliia Tirichenko, Fred Cegla

Applications are invited for a research studentship in the field of laser processing of materials (graphene-enabled laser joining and repairs) leading to the award of a PhD degree. The post is supported by a bursary and fees (at the UK student rate) provided by the PhD Scholarship of the Department of Mechanical Engineering.

In the era of industrial sustainability, there's a growing emphasis on prioritizing material repair and reuse over incessant production. The principles of "repair, don't replace" and "First Time Right" are at the forefront, highlighting the need for enhanced quality control and sustainable fabrication methods. As the complexity and scale of the components we produce continue to expand, the demand for reliable methods to securely join dissimilar materials has surged. Laser processing, especially laser welding, emerges as a promising solution, particularly in industries like aerospace and transportation.

However, a significant challenge arises when it comes to materials that do not readily absorb laser light, rendering them unsuitable for laser processing. This is particularly relevant for refractory materials, which require exceptionally high temperatures for melting or sintering. The effective conversion of laser light into heat is crucial in these cases.

Our research project aims to address this challenge by exploring a universal enhancer – chemically modified graphene. Graphene possesses the unique ability to efficiently absorb laser light across a broad range of wavelengths and convert it into heat through the photothermal effect. When graphene is introduced to refractory compounds, it enhances their laser processability, making them suitable for laser melting and sintering manufacturing methods. Our research will involve the synthesis of various graphene variants, blending them with feedstock powders, and using them to create joints and repairs. Throughout the project, we will conduct continuous characterization to understand how the composition of the materials and the presence of graphene affect laser processability and the quality of the joints.

In addition to this, we will develop a novel in-situ non-destructive evaluation method as part of the project. This method will enable us to monitor the quality of joints by utilizing high-frequency modulations of the laser source, which emit ultrasonic waves that can be detected and used for inspection.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London, holding or expecting a First-Class or high 2:1 MSc degree in engineering, materials, chemistry, physics or related fields. Keen to investigate graphene's impact on laser processing, they'll work on experiments and tech development, which will require teamwork, observation, and communication skills. For eligibility, applicants must be "UK Residents" per EPSRC's definition ( https://www.ukri.org/what-we-do/developing-people-and-skills/esrc/funding-for-postgraduate-training-and-development/eligibility-for-studentship-funding/ ). The 3.5-year studentship, commencing in 2023, covers tuition fees and offers an annual tax-free stipend.

For further details of the post contact Dr Iuliia Tirichenko (Elizarova) [email protected] , Dr. Frederic Cegla [email protected] +44 (0)20 75948096. Interested applicants should send an up-to-date curriculum vitae to the email addresses above. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be addressed by College Registry.

PhD Studentship in Lubrication in an inert gas environment – a new route to sustainability (Dr Janet Wong)

Supervisor: Dr Janet Wong

The useful life of liquid lubricants and greases is limited by the fact that they oxidise in air. This requires regular oil change and disposal, limits the temperatures at which lubricants can be used, and greatly constrains the application of environmentally-friendly vegetable oils. Prevention of lubricant oxidation would thus make a major contribution to sustainability and the environment. Our group is developing an exciting concept to prevent lubricant oxidation via “inerting” closed lubricated systems. This concept can potentially bring significant benefit to performance of transmissions of electric vehicle, wind-turbine, industrial gearboxes and hydraulics. For more details, please see the link below:

Zhang, J., Wong, J.S.S., and Spikes, H.A., 'Lubrication in an Inert Atmosphere - a New Era in Lubricant Technology', STLE Annual Meeting, Long Beach, May 24th 2023.

Applications are invited for a research studentship in the field of lubrication and tribochemistry, leading to the award of a PhD degree. The post is supported by a bursary and fees (at the UK student rate) provided by Shell. The studentship is for 3.5 years, starting as soon as possible and will provide full coverage of standard tuition fees and an annual tax-free stipend of approximately £20k. Home (based on UKRI criteria) and international candidates will be considered.

This experimental project will study performance of lubricants in inert conditions. Using advance tribological and analytical techniques, you will answer the following research questions: (i) Do lubricants designed to work in air function effectively in the absence of oxygen and if now, why not and how can they be changed? (ii) How, if at all. do lubricants degrade in the absence of oxygen? The answers to these will then be used to formulate and apply inerted lubricants in real applications.

The project will be hosted by The Tribology Group at Imperial College, which is a vibrant, world-leading research group with unparalleled experimental and modelling equipment facilities. You will be supervised by Dr Janet Wong and Professor Hugh Spikes. You will be expected to study at a Shell location for a minimum period of 3 months and be part of a larger community of Shell-funded researchers in the Group who are working on lubricant and electric vehicle-related projects.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will have a 1st class honours degree or a high 2:1 degree at Master level (or equivalent) in Chemical Engineering, Materials, Chemistry or a related science and branch of engineering. You have an enquiring and rigorous approach to research together with a strong intellect and disciplined work habits. Good team-working, observational and communication skills are essential.

For further details of the post contact Dr Janet Wong [email protected] . Interested applicants should send an up-to-date curriculum vitae to Dr Wong. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be addressed by College Registry.

PhD Studentship in Metal Forming and Materials Modelling (Dr Xiaoyu Xi)

Supervisor: Dr Xiaoyu Xi

Applications are invited for a research studentship in the field of Metal Forming and Materials Modelling, leading to the award of a PhD degree. The post is supported by a bursary and fees (at the UK/EU student rate) provided by the sponsors in the aviation, aerospace and railway industries.

A number of PhD positions are available for UK and EU nationals. The research involves development of advanced metal forming and modelling techniques, and will be carried out at the Metal Forming and Materials Modelling Group. The research activities of the group cover a wide range of areas from theoretical and computational solid mechanics to experimental materials research. These research works involve a wide range of industries, including aerospace, aeronautical, automotive and locomotive.

There are two main research themes within the group: Metal Forming Technologies and Materials Modelling. The Metal Forming research focuses on the development of advanced forming processes e.g. manufacturing lightweight structural materials into high-strength and complex shaped engineering components and cloud based FEA (Contact Dr. L. Wang at [email protected] to make enquires). The Materials Modelling tackles the fundamental challenges in materials behaviour at microscopic scale e.g. the distribution and evolution of microstructure and defects as functions of loading, temperature and loading rate, and link them with the macroscopic mechanical responses e.g. formability and damage tolerance (Contact Dr. J. Jiang at [email protected] to make enquires).

Over the past decade, the group has successfully developed several world-leading forming technologies and novel materials modelling methods. These techniques have been directly implemented in automotive and aerospace industries. Three research centres and one joint lab have been established. The group is currently led by several world-leading experts in material forming, including Prof. Jianguo Lin, FREng, Dr. Liliang Wang, Dr. Daniel Balint and Dr. Jun Jiang, and has secured over £15 M funding from industries, UK and EU research councils. Over 60 research staff and students are supported through them. To view a current list of projects please visit our website http://www.imperial.ac.uk/metal-forming/ .

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will have a 1st class honours degree (or equivalent) and/or a distinction MSc degree (if applicable) in engineering or a related subject, and have an enquiring and rigorous approach to research together with a strong intellect and disciplined work habits. Good team-working, observational and communication skills are essential.

To find out more about research at Imperial College London in this area, go to: http://www3.imperial.ac.uk/mechanicalengineering

For information on how to apply, go to: http://www.imperial.ac.uk/mechanical-engineering/study/phd/how-to-apply/

For further details of the post contact Dr Xiaoyu Xi at [email protected] , +44 (0)20 7594 9546. Interested applicants should send an up-to-date curriculum vitae to Dr Xiaoyu Xi. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be addressed by College Registry.

Imperial Managers lead by example.

Committed to equality and valuing diversity. We are also an Athena SWAN Silver Award winner, a Stonewall Diversity Champion, a Two Ticks Employer, and are working in partnership with GIRES to promote respect for trans people

PhD Studentship in Molecular Simulations of Food Biotribology (Dr James Ewen)

Supervisor: James Ewen

Applications are invited for a research studentship in the field of Molecular Simulations of Food Biotribology, leading to the award of a PhD degree. The post is supported by a bursary and fees (at the UK student rate ) provided by the Mechanical Engineering Department, and it is open to ‘home’ students : https://www.imperial.ac.uk/study/pg/apply/fees/fee-status/ . The project will be supervised by Dr James P. Ewen, Dr Marc Masen, Prof. Philippa Cann (Tribology Group), and Prof. Maria Charalambides (Soft Solids Group).

The project will involve applying molecular dynamics simulations to study food biotribology inside the mouth. This is important because friction and lubrication play a crucial role in determining the sensory attributes and perceived quality of food products. Coarse-grained molecular models of biological surfaces in the mouth (e.g., tongue, palate, and teeth), saliva (water, electrolytes, and mucus), and specific food components (e.g., proteins, lipids, and carbohydrates) will be developed. These models will then be used in non-equilibrium molecular dynamics (NEMD) simulations to study the rheology and friction of food components under physiological conditions representative of chewing and swallowing. We will incorporate information from the molecular simulations into larger-scale models, such as the finite element method (FEM). The developed models will be validated against experiments to measure the wettability and friction of food formulations using biomimetic surfaces.

The proposed project will contribute to the fundamental understanding of food biotribology, addressing key challenges in food science and technology. By elucidating the molecular basis of sensory perception and mouthfeel, the findings will facilitate the design of healthier, more appealing food products with enhanced nutritional value and consumer acceptance. Furthermore, the insights gained from this project can be extended to other applications, such as oral medicines and protein shakes, where biotribological interactions inside the mouth also play a crucial role in product performance and consumer satisfaction.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will have a first or upper second-class honours degree in mechanical engineering, bioengineering, chemistry, physics, materials science, or a related subject, and an enquiring and rigorous approach to research together with a strong intellect and disciplined work habits. Good team-working, observational and communication skills are essential. An interest in advanced multi-scale modelling is desirable.

https://www.imperial.ac.uk/tribology/

https://www.imperial.ac.uk/mechanical-engineering/research/mechanics-of-materials/composites-adhesives-and-soft-solids/soft-solids/

For further details of the post, please contact Dr James P. Ewen [email protected] . Interested applicants should send an up-to-date curriculum vitae to Dr Ewen. Suitable candidates will be required to complete an electronic application form at Imperial College London for their qualifications to be addressed by College Registry.

PhD Studentship in Non-destructive evaluation (NDE) (Dr Fred Cegla)

Supervisor: Dr Fred Cegla

Improved spatial localisation of ultrasonic scan data on physical assets

The drive towards Industry4.0 and IoT enabled technology is leading to increased demand for digitalisation of NDE data and reporting. As operators become less involved in the process of data acquisition and on the spot analysis, the localisation and registration of measurement data is becoming increasingly important. In unstructured environments, standard robotic localisation techniques today have uncertainties in the order of 0.01m. This might be sufficient for single shot inspection assessments but is not good enough for trend estimation over time because subtraction of two spatially mismatched defects will result in large errors in the estimated change of defect size over time and hence trending errors.

This project aims to address this problem by researching different external and internal localisation referencing techniques to register data and efficient techniques to handle their temporal evolution. We will consider SLAM (simultaneous localisation and mapping) based on cameras for external features and inspection data (ultrasound will be used in the project) for the acquisition of internal data. The project will build on the results of the feasibility study on the “stitching of ultrasonic phased array scan data” that was completed in 2021.

To be eligible for support, applicants must be “UK Residents” as defined by the EPSRC. Please check your suitability at the following here. The studentship is for 3.5 years starting in 2023 and will provide full coverage of standard tuition fees and an annual tax-free stipend. Funding is through the Industrial Cooperative Award in Science & Technology (iCASE) scheme funded by the EPSRC and NDEvR Ltd (the legal entity representing the >10 industrial and ~8 university members of the UK Research Centre for NDE- RCNDE consortium). The students will be hosted at one of the industrial partner company locations for a minimum period of at least 3 months over 4 years and offered industrial mentorship during the project. The student will be part of a larger community of industry funded researchers in NDE at Imperial and the partner institutions.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. Applicants should hold or expect to obtain a First-Class Honours or a high 2:1 degree at Master’s level (or equivalent) in Mechanical Engineering, another branch of engineering, Materials, Physics, Chemistry or a related science. We expect you to have an enquiring and rigorous approach to research together with a strong intellect and disciplined work habits. An interest in developing experimental and/or modelling methods to investigate the effect of electric fields on engineering interfaces across the scales is essential. Good team-working, observational and communication skills are essential.

Non-Destructive Evaluation | Research groups | Imperial College London

For further details of the post contact Dr. Frederic Cegla [email protected] +44 (0)20 75948096. Interested applicants should send an up-to-date curriculum vitae to Dr. Cegla. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be addressed by College Registry.

PhD Studentship in Optimal Frictional Damping in Bladed Discs Under Rotating Conditions (Dr Christoph Schwingshackl)

Applications are invited for a research studentship in the field of clean, safe and competitive future aero engine development, leading to the award of a PhD degree. The post is supported by a bursary and fees (at the UK student rate) provided by the EPSRC, with a generous bursary top-up from industrial funds. EPSRC candidates should fulfil the eligibility criteria for the award.

The research will be conducted within the Vibration University Technology Centre (VUTC), sponsored by Rolls-Royce Plc to facilitate vibration related research. It involves the development and validation of novel nonlinear structural dynamic approaches to predict damping of aero engines components. Non-linear dampers are essential for aero-engine component safety, reliability and performance. Improved, validated non-linear contact prediction will allow the design of more robust, lighter weight components, improving Specific Fuel Consumption, Time on Wing and operational safety. As step changes in technologies and engine usage are made to meet Net Zero targets, the improved non-linear dynamic prediction capability will greatly enhance modelling techniques de-risking technology developments.

Recent research in the VUTC has shown that the performance of frictional damping, and particularly Under Platform damping in bladed discs in aeroengines, is highly sensitive to the initial loading conditions, potentially limiting, or even negating the advantages of optimised damper designs. This research work will focus on the development of efficient techniques to improve non-linear contact modelling, to include the uncertainties into Under Platform Damper predictions, use these techniques to propose an optimised, more robust damper designs, and validate the new modelling methodology with the help of an existing rotating test bed. The work will be both numerical and experimental, and hence we are looking for a candidate with interest in both areas. The research will be conducted in close collaboration with Rolls-Royce Plc. and offers the opportunity to spend some time in the company for knowledge transfer.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will have a 1st class honours degree in mechanical engineering or a related subject, and an enquiring and rigorous approach to research together with a strong intellect and disciplined work habits. An interest in numerical and experimental nonlinear dynamic techniques is essential. Good team-working, observational and communication skills are essential.

To find out more about this research opportunity go to:

https://youtu.be/MzDXr-Q1VKw

For further details of the post contact Dr C. Schwingshackl [email protected] . Interested applicants should send an up-to-date curriculum vitae to Dr Schwingshackl. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be addressed by College Registry.

PhD Studentship in revolutionizing aero-engine testing: a novel experimental technique for friction monitoring (Dr Alfredo Fantetti)

Supervisor: Alfredo Fantetti

Applications are invited for a research studentship in the field of vibration and friction, leading to the award of a PhD degree. The post is supported by a bursary and fees (at the UK student rate of approximately £21,000 net per annum) provided by the Department of Mechanical Engineering under the EPSRC Doctoral Training Partnership scheme, and it is open to home students only .

The research will be conducted in the Tribology Group, one of the largest and most renowned tribology research groups in the world today, collaborating with the government, companies in Europe, USA and Far East, and many universities across the globe. Amongst others, the group focuses on the aviation sector, facing the urgent need to design lighter and more environmentally sustainable aero-engines to target Net Zero goals. Aero-engine manufacturers face the complex challenge of ensuring safety while reducing emissions, a task made daunting by the intricate vibrational behaviour of engine components. Predicting the engine dynamic behaviour is particularly complicated due to the millions of components in contact, whose understanding is limited by a lack of experimental friction data.

This PhD project aims to develop a new experimental technique, and related theory, to monitor friction contacts during vibration. The technique will be based on the use of metamaterials, emerging artificially-engineered structures with the exceptional capability to manipulate how waves propagate. This capability is leading a multi-billion-dollar technological revolution in several applications, including non-destructive evaluation, which will be exploited here to monitor friction. Friction monitoring based on metamaterials has never been proposed before and is an opportunity for a breakthrough in the fields of tribology and dynamics. By joining this project, you can make a tangible impact on the future of aviation, contributing to safer, cleaner, and more efficient air travel.

The work is supported by Rolls-Royce plc, whose senior specialists will provide guidance throughout the PhD. Through the company’s extensive global network, the student will establish contacts with industrial colleagues and leading academic groups particularly in the UK, Germany, and the US. The Imperial academic supervisors include Dr Fantetti (Tribology Group), Dr Hooper (Mechanics of Materials Group) and Dr Renson (Dynamics Group).

This PhD is an exciting opportunity for those interested in experiments as well as simulations, ranging topics such structural dynamics, ultrasound and tribology.

To find out more about this research opportunity, watch this YouTube video:

https://youtu.be/EVbX5d7OqzM

For further details of the post contact Dr Alfredo Fantetti at [email protected] . Interested applicants should send an up-to-date curriculum vitae to Dr Fantetti. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be addressed by College Registry.

PhD Studentship in Shear Band Modelling (Prof. Maria Charalambides)

Supervisor: Prof Maria Charalambides

Applications are invited for a research studentship in the field of Mechanics of Materials leading to the award of a PhD degree.

Shear bands are narrow regions of intense shear that can arise when a material is deformed. The localisation of the deformation causes the temperature in the shear band to rise and can trigger chemical reactions within the material. Current continuum solid mechanics codes struggle to resolve shear bands accurately. The aim of this PhD is to establish robust, mesh-independent methods for modelling shear bands in reactive materials, specifically polymer bonded explosives. This research could exploit recently-developed, ad-hoc shear band sub-models that account for reaction in the shear band. The aim is to integrate these sub-models or provide equivalent methods within a continuum mechanics code capable of modelling arbitrary configurations. The project will investigate the possibility of using AI and machine learning in shear band modelling, developing a deep insight in which microstructural features or parameters in the model cause the most chemical reaction.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will have a 1st or 2:1 class honours degree in mechanical engineering, physics, mathematics, or a related subject, and an enquiring and rigorous approach to research together with a strong intellect and disciplined work habits. An interest in Mechanics of Materials is essential.

This post is supported by a bursary and fees at the UK student rate provided by our research collaborators, AWE. As a result of the industrial funding, this studentship will attract a higher bursary than the usual EPSRC student rate. Open literature publication is encouraged, and funding is included for attending international scientific conferences. Due to the nature of the work undertaken by AWE, candidates should be a British Citizen or a citizen of a NATO country. The successful candidate will be encouraged to undergo security clearance to benefit from the possibility of spending some time embedded at AWE, gaining valuable experience of industrial research. For more information, see www.awe.co.uk

For further details of the post contact Prof Maria Charalambides m.charalambides @imperial.ac.uk +44 (0)20 75947246. Interested applicants should send an up-to-date curriculum vitae to Prof Charalambides. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be addressed by College Registry.

PhD Studentship in Shell University Technology Centre (Dr Janet Wong)

Supervisor: Janet Wong

Applications are invited for a research studentship in the field of Fuels and Lubricants, leading to the award of a PhD degree. The post is supported by a bursary and fees (at the UK/EU student rate only) and sponsored by Shell. The studentship is for three and a half years from June 2020.

Lubricants are used in engines to reduce friction, to improve machine efficiency and thus reduce greenhouse gas emissions. Fuel, however may mix with the lubricant during operation, affecting the effectiveness of the lubricant. The proposed research programme is a fundamental study of the influence of fuel on properties of lubricant, with in-situ measurements to be carried out in a modified engine, using various spectroscopic techniques.

The project is sponsored by the Shell University Technology Centre (UTC) for Lubricants and Fuels based in the Mechanical Engineering Department, Imperial College London, and will take place in the Tribology Group and the Thermofluids Division in this Department. Both the Tribology Group and the Thermofluids Division are world leaders in their respective fields of tribology, fluid flow, heat and mass transfer, and combustion. Together, they comprise of more than 90 PhD students as well as many post-doctoral researchers and academic staff. It offers a vibrant and multicultural working environment. Laboratories were recently refurbished and are well equipped with an extensive range of instrumentation and extensive computer facilities.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will be an experimentalist and will have a background in Chemical or Mechanical Engineering, Chemistry, Physics or a related field. You will have an enquiring and rigorous approach to research, together with a strong intellect and disciplined work habits. An interest in engines and basic understanding of their operation with good practical skills is desirable. Training will be given in tribology, thermofluids and the relevant investigative techniques. You will become a skilled communicator, comfortable in an international situation. Good team-working, observational and communication skills are essential. The project will involve close collaboration with Shell and you will be expected to visit and communicate with various Shell centres around the world.

For further details of the post please contact Dr Sarah Matthews ( [email protected] ) or Dr Janet Wong ( [email protected] ). Interested applicants should email an up-to-date curriculum vitae. Suitable candidates will be required to complete an electronic application form available on the Imperial College London website in order for their qualifications to be assessed by the College Registry.

PhD Studentship in smart interface and contact (Dr Min Yu)

Supervisors: Dr Min Yu

Applications are invited for a research studentship in the field of tribology, leading to the award of a PhD degree. The post is supported by a bursary and fees (at the UK student rate) provided by the Department of Mechanical Engineering, Imperial College London.

Interfaces between moving surface, covering a vast range of practical applications in industrial and biomedical sectors, are critical in determining efficiency and durability. The research involves design and validation of a novel smart interface. A magnetic field is actively controlled to actuate the rheological / tribological behaviour of magnetorheological fluid between a sliding contact, a non-destructive ultrasonic reflection technique is employed to probe the fluid film thickness, the variation of which is taken into the feedback of the overall closed control loop. This smart interface has a potential in reducing friction and thus energy usage in mechanical transmissions, or enabling intelligent mechatronic systems (e.g., soft robots), where controllable interface friction and fluid film thickness are desired. Also, structural health monitoring can be additional benefit. This project will be mainly experiment oriented, and numerical / analytical modelling will be also promoted.

The PhD will be based in the Non-Destructive Evaluation (NDE) Group and the Tribology Group in the Department of Mechanical Engineering, Imperial College London. Both are leading research groups in the world, with extensive experimental and numerical research facilities and an international reputation for research excellence. It will be performed in collaboration with other research groups at Imperial College London and other universities.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will have a 1st class honours degree in mechanical engineering or a related subject, and an enquiring and rigorous approach to research together with a strong intellect and disciplined work habits. An interest in mechanical engineering, tribology, control, sensing, and signal processing is essential. Good team-working, observational and communication skills are essential. The studentship will provide the opportunity to become a skilled communicator, comfortable in an international environment at a world-leading institution.

For further details of the post contact Dr Min Yu [email protected] +44 (0)20 7594 3840. Interested applicants should send an up-to-date curriculum vitae to Dr Min Yu. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be addressed by College Registry.

PhD Studentship in solid-liquid interfaces (Dr Janet Wong)

Applications are invited for a research studentship in the field of solid-liquid interfaces leading to the award of a PhD degree. To be eligible for support, applicants must be “UK Residents” as defined by the EPSRC. The studentship is for 3.5 years starting as soon as possible and will provide full coverage of UK students standard tuition fees and an annual tax-free stipend of approximately £17,609. Please check your suitability at the following web site:

http://www.epsrc.ac.uk/skills/students/help/Pages/eligibility.aspx

This project is part of a multidisciplinary project InFUSE whose goal is to study key material and fluid interfaces across a range of application areas with direct impact on the energy transition. Our aim is to create a step-change in the correlative characterisation of interfaces embedded in these systems under realistic environments.

Temperature (and the extraction of heat) plays a very important role in the performance of machines. For example, increased temperature may reduce the viscosity of lubricants, which impacts on friction or wear of machines. It may also lead to increased rate of undesirable reactions, such as corrosion and surface degradation. Overheating also reduces components lives. In the context of EV, increased temperature reduces battery efficiency and poses safety risk. All these applications point to the importance of characterising interfacial thermal conductance at a solid-liquid interface, which is extremely challenging.

In this experimental project, the PhD researcher will characterise the thermoconductance of solid-liquid interfaces in engineering fluids, including lubricants, coolants, and refrigerants. Specifically, the effects of additives, coatings and surface modifications will be investigated. To do so, the researcher will design a setup based on thermoreflectance measurements. Complementary techniques such as QCM, AFM, IR will also be employed. The potential of using thermoreflectance for acquiring film formation kinetics will also be explored.

This project will be based at Imperial College with significant interaction with the project partners, Thin Film Technology Laboratory, Diamond Light Source and Shell. The PhD researcher also will be a part of the Tribology Group. It offers a vibrant, multidisciplinary and multicultural working environment. Laboratories were recently refurbished and are well equipped with an extensive range of instrumentation and extensive computer facilities.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will hold, or be expected to achieve, a Master’s degree or a 4 year undergraduate degree at 2:1 level (or above) in a relevant subject, e.g. Chemical or Mechanical Engineering, Materials, Chemistry, Physics or a related field. You will have an enquiring, rigorous and hands-on approach to research, together with a strong intellect and disciplined work habits. An interest in experimental work and development is essential, as are good team-working, observational and communication skills.

PhD Studentship in Thermal-hydraulics Experiments for Surrogate Model Validation with Uncertainty Quantification (Dr Antonis Sergis)

Thermal-hydraulics Experiments for Surrogate Model Validation with Uncertainty Quantification Incorporated into Digital Twin for Nuclear Systems

Supervisor: Antonis Sergis

Applications are invited for a research studentship in the field of Thermofluids and Nuclear leading to the award of a PhD degree. The post is supported by a bursary and fees (at the UK student rate), provided by UKAEA and the Department of Mechanical Engineering. The Department’s entry requirements must be fulfilled for enrolment to this program.

You can check your eligibility and register interest by following this link https://imperial.eu.qualtrics.com/jfe/form/SV_6KiVRAhitEJ30Tc

The focus of the project is the reliable linking of a well characterised experiment with simulation models including the development of the required simulation techniques to be applied in a broad range of fields. A candidate experiment that is going to be used for this purpose is a T-junction experiment, where flows of dissimilar thermal characteristics are mixed. Understanding the thermal behaviour, mixing and flow of dissimilar temperature fluids at a T-junction, is highly relevant for nuclear fusion applications, while also applicable to a wide range of non-fusion relevant cooling systems for high power density thermal applications. The research has mainly been based on numerical simulations, due to the difficulties with experimentation. Therefore, physical understanding of the process is missing and correlations for the effect of turbulence on thermal performance and the design consequences on container geometry are not very well understood. This is important for the improvement and evaluation of numerical models for such flows. The proposed study will deliver new understanding and scaling of T-junction flows by combining experimental and numerical efforts. It is expected that the proposed study will provide guidance for optimisation of plasma-facing component designs and control of cooling systems in near-term applications such as UKAEA Chimera but also future designs for e.g. STEP. The project falls under the topics of Thermal hydraulics and flow mixing of dissimilar temperature flows in T-junction geometries. The student would be based full time at Imperial College London with visits when needed to UKAEA sites and other collaborators.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will have a 2.1 ot a 1st class honours degree in mechanical engineering or a related subject, and an enquiring and rigorous approach to research together with a strong intellect and disciplined work habits. An interest in Thermofluids and the nuclear field is essential. Good team-working, observational and communication skills are essential.

For further details of the post contact Dr Antonis Sergis [email protected] +44 (0)20 7594 7041. Interested applicants should send an up-to-date curriculum vitae to Dr Sergis. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be addressed by College Registry.

PhD Studentship in Thermofluids (Prof Aleiferis)

Supervisors: Professor Pavlos Aleiferis

High Efficiency Concepts for Zero-Carbon Hydrogen/Ammonia Engines

Applications are invited for a research studentship in the field of Thermofluids leading to the award of the PhD degree. The focus will be on developing and understanding new operation concepts for high-efficiency green engines running on zero-carbon fuels like hydrogen and ammonia, using advanced experimental techniques. The post is supported by full bursary and tuition fees at the UK research student rate for ‘Home or Ireland’ students:

https://www.imperial.ac.uk/students/fees-and-funding/tuition-fees/postgraduate-tuition-fees/2021-22/postgraduate-research-programmes/faculty-of-engineering/

Please do not make enquiries or apply formally unless you meet the tuition fees criteria.

Project Description This project will investigate the fundamentals of fluid dynamics, mixture formation and ignition in internal combustion engines running on hydrogen and ammonia fuels using advanced optical diagnostic experimental techniques. Key areas of study will include direct fuel injection and air mixing in a fully optical engine with flexible valvetrain and boosting systems, to investigate advanced ignition and combustion modes aiming for a zero-carbon zero-emission engine. The research methods will give a full picture of in-cylinder effects related to various engine operating regimes.

The Thermofluids Division at Imperial has an internationally leading record in fundamental and applied research into multiphase and reacting flows, established over several decades. You will be an enthusiastic and self-motivated person who meets the Academic requirements for enrolment on the PhD degree at Imperial. You are expected to have a 1st or upper 2nd class honours degree in Mechanical Engineering or a related subject, and an enquiring and rigorous approach to research, together with a strong intellect and disciplined work habits. A keen interest in experimentation and future high-efficiency zero-carbon engine systems is important. Excellent observational, practical and communication skills are all essential for this post.

To find out more about the Mechanical Engineering Department at Imperial College London, go to:

https://www.imperial.ac.uk/mechanical-engineering

For further details of the post and informal enquiries you may contact Prof. Pavlos Aleiferis:

https://www.imperial.ac.uk/people/p.aleiferis

Suitable candidates will be asked to complete an electronic PhD application form:

The starting date will be fixed in discussion with the successful candidate, preferably by the first quarter of 2022.

PhD Studentship in Transformative Metal Welding Technique (Dr Jun Jiang)

Supervisor: Dr Jun Jiang

Deadline for applying: until post filled

Applications are invited for a research studentship in the field of advanced welding technologies, leading to the award of a PhD degree. The position is supported by various industry stakeholders, including Commonwealth Fusion Systems, UKAEA, Alfa Laval, SMT, and British Gear Associate, emphasising its significant industrial relevance and potential.

Dr. Jiang's group at Imperial College has pioneered a groundbreaking solid-welding technology that seamlessly integrates cold-welding with diffusion welding, all in open-air conditions. This innovative method has demonstrated exceptional results, such as maintaining base metal properties with minimal deformation. Its advantages encompass high joint strength, precision, cost-effectiveness, scalability, and much more, earning its 1st place in the Fusion Manufacturing Challenges 2023 at TechConnect, Washington.

The prime focus of this PhD will be to develop and optimise this revolutionary welding technique for manufacturing industry-representative nuclear fusion components (like tungsten-316L or vanadium) or creating bimetallic Al-Fe lightweight gears for transmission systems. With access to the state-of-the-art Gleeble 3800 testing facility, the candidate will delve deep into understanding the intricacies of welding mechanisms. This will encompass studies on oxide evolution, grain boundary migration, and voids closure. Using cutting-edge in-situ thermal micromechanical testing and characterisation units, the student will explore the microstructure evolution at the solid welding joints. Furthermore, the project will also encompass developing physically based constitutive equations to numerically portray these bonding mechanisms, facilitating the simulation and optimisation of the welding process.

Ideal candidates should be passionate, self-motivated, and meet the academic prerequisites for enrolment for the PhD degree at Imperial College London. Possession of a 1st class honours degree in Mechanical/Material Engineering, or a related field is essential. The student should demonstrate robust project and communication skills and should possess a keen interest in advanced manufacturing, welding, and materials science.

To understand more about research at Imperial College London in this sphere, visit:

https://www.imperial.ac.uk/mechanical-engineering/research/

For application guidance, please refer to:

http://www.imperial.ac.uk/mechanical-engineering/study/phd/how-to-apply/

For any further details about this position, please contact Dr. Jun Jiang at [email protected]. Prospective applicants should forward an updated CV to Dr Jiang. Suitable candidates will need to complete an electronic application form at Imperial College London, ensuring their credentials are assessed by the College Registry.

Closing date: until post filled

PhD Studentship in Tribology: Fundamental understanding of water-based lubricants for hydraulic and EV applications - iCASE Shell (Prof Daniele Dini)

Supervisor: Daniele Dini

Applications are invited for a research studentship in the field of “ Fundamental understanding of water-based lubricants for hydraulic and EV applications ”, leading to the award of a PhD degree. The studentship will be based in the Shell-Imperial University Technology Centre (UTC) for Mobility and Lubricants, which is hosted by the Tribology Group in the Department of Mechanical Engineering at Imperial College London. It will be supervised by members of academic staff in the Group including Prof. Daniele Dini, Dr Janet Wong and Prof. Hugh Spikes. The studentship is for 4 years starting in October 2024 and will provide full coverage of standard tuition fees and an annual tax-free stipend of approximately £24,000. This studentship is funded by an EPSRC Industrial Cooperative Awards in Science & Technology (CASE) and industrial partner Shell. The student will be expected to study at a Shell location for a minimum period of at least 3 months during the studentship and will be offered industrial mentoring throughout the project. At Imperial, the student will be a member of a larger community of Shell-funded researchers in the Tribology Group who are working on lubricants and electric vehicle-related projects, which cover both experimental and modelling techniques across the scales. The Tribology Group at Imperial College is a vibrant, world-leading research group with unparalleled experimental and modelling equipment facilities.

The project is concerned with the development of novel water-based lubricants for EVs and environmentally-friendly hydraulics. The aim of this project is to improve our understanding of and ability to design aqueous lubricants based on polymer solutions in water. Although most liquid lubricants are based on organic hydrocarbons and esters, for many years a few have been based on water. To date these have been used primarily as mining hydraulic fluids (because of their fire resistance) and in metal cutting (due to their superior cooling properties). However, there is now growing interest in using water-based lubricants in a much wider range of applications, including electric vehicle (EV) transmissions, industrial oils and hydraulics. Their excellent cooling properties are important for EVs, but the main desirable features in other applications are their biodegradability and general green credentials.

The main objectives of this project are to study the fundamental aspects that govern the performance of water-based polymer solutions as lubricants. This will be pursued by looking at novel sustainable formulations of polymers to be used to form separating films with characteristics similar to those achieved with the best performing conventional lubricants. We will be adopting our modern experimental techniques, which include very high shear rate viscometry, film thickness measurement rigs and conventional rolling-sliding tribometers as well as in-contact fluorescence to explore the in-contact composition of lubricant films and local viscosity and rheological description of the fluids under consideration. This will be coupled with the use of in-house models that can be employed to explore and predict the behaviour of newly developed fluids in different components and applications of interest to Shell.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You should hold or expect to obtain a First-Class Honours or a high 2:1 degree at Master’s level (or equivalent) in Mechanical Engineering, another branch of relevant engineering, Materials, Physics, Chemistry or a related science. We expect you to have an enquiring and rigorous approach to research together with a strong intellect and disciplined work habits. An interest in developing new experimental and/or modelling techniques for the discovery of new engineering solutions for the energy transition is essential, as are good team-working, observational and communication skills.

https://www.imperial.ac.uk/tribology/shell-utc/

For further details of the post contact Prof. Daniele Dini, [email protected] or Dr Janet Wong, [email protected] . Interested applicants should send an up-to-date curriculum vitae to them. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be addressed by College Registry.

PhD Studentship in Tribology: Metal Forming: Next Generation Patterned Steel Floors for Best in Class Slip Resistance Performance(Prof Daniele Dini)

Applications are invited for a research studentship in the field of “ Next Generation Patterned Steel Floors for Best in Class Slip Resistance Performance ”, leading to the award of a PhD degree. The studentship will be based in the Tribology and the Metal Forming and Materials Modelling groups in the Department of Mechanical Engineering at Imperial College London. It will be supervised by Prof. Daniele Dini and Professor Jianguo Lin as well as an industrial expert, Dr Bin Xiao from Tata Steel. The studentship is for 4 years starting in October 2024 and will provide full coverage of standard tuition fees and an annual tax-free stipend of approximately £24,000. This studentship is funded by an EPSRC Industrial Cooperative Awards in Science & Technology (CASE) and industrial partner Tata Steel UK. The Tribology and the Metal Forming and Materials Modelling groups are vibrant, world-leading research groups with unparalleled experimental and modelling equipment facilities.

It is well known that slips and trips are the most common cause of injuries at work and therefore subject to Health and Safety Executive (HSE) consideration. Tata Steel UK is a product leader in the UK market for patterned steel floor plates. The dense pattern of studs on as rolled steel floor plates can provide outstanding slip resistance in both dry and wet conditions at all angles and allows plates/thick strips to be used in any direction. They are typically used in stairways (good bendability), walkways, lifts, platforms and bridges, and offering superior slip resistance. However, the fundamental mechanisms and important factors (stud geometry, roughness, conformance to shoe sole standards,…etc.) determining slip resistance under different conditions are not well understood; lack of fundamental knowledge hinders the development of new disruptive solutions in this space.

The main objectives of this project are to determine and rank important parameters controlling slip resistance of floorplate, as well as generate novel pattern designs with enhanced slip resistance performance. This will be achieved by combining fundamental understanding of tribological interactions and innovative surfaces and materials design and processes. The main outcome of this research programme will be the development of tools and methods for the selection of new geometrical patterns that could be considered for the next generation of patterned steel floor plates. This technology will also be applied to other Tata Steel UK products that require enhance slip &/or wear resistance performance. We will target the development of new geometrical patterns for products for specific applications through the development of advanced physics- and data-driven models, as well as laboratory tests and current industrial standards for validation. This will lead to new design tools and standard of broad applicability.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You should hold or expect to obtain a First-Class Honours or a high 2:1 degree at Master’s level (or equivalent) in Mechanical Engineering, another branch of relevant engineering, Materials, Physics, Chemistry or a related science. We expect you to have an enquiring and rigorous approach to research together with a strong intellect and disciplined work habits. An interest in developing modelling and simulation methods and the application of machine learning techniques for the discovery of new engineering solutions is essential, as are good team-working, observational and communication skills.

https://www.imperial.ac.uk/metal-forming/

For further details of the post contact Prof. Daniele Dini, [email protected] or +44 (0)20 75947242. Interested applicants should send an up-to-date curriculum vitae to Prof. Dini. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be addressed by College Registry.

AHRC Collaborative Doctoral Partnership (CDP) studentship – “Second life: understanding deterioration of recycled plastics (Prof. Maria Charalambides)

Supervisor: Prof Maria Charalambides

Imperial College London and the Victoria and Albert Museum (V&A) are pleased to announce the availability of a fully funded Collaborative Doctoral Studentship from October 2024 under the AHRC’s Collaborative Doctoral Partnerships (CDP) scheme .

Applications are invited for this research studentship in the field of Mechanics of Materials and Conservation of Art, leading to the award of a PhD degree.

This project will be jointly supervised by Prof Maria Charalambides at Imperial and Dr Valentina Risdonne at the V&A. The student will be expected to spend time at both Imperial and V&A, as well as becoming part of the wider cohort of CDP funded students at both the V&A, and across the UK. The CDP consortium organise an extensive range of professional and skills development activities designed to enhance CDP researcher’s PhD experience and future employability.

Students should have a master’s degree in a relevant subject or can demonstrate equivalent experience in a professional setting.

This project will focus on understanding the deterioration of recycled plastics in museums, with the purpose of defining a long-term mitigation strategy. Recycled plastic materials started to be used more extensively in the past two decades; with drives to increase global sustainability across design, more of these objects will enter the V&A collection. As the planet’s climate changes and the V&A creates lighter and brighter gallery spaces, there is an urgent need to evaluate the risks to objects containing recycled plastics and establish measures toward their preservation. We will employ experimental and computational mechanics methods to investigate chemical and mechanical degradation in these materials and the potential interaction between these. Experimental studies will determine the physical and mechanical properties of the plastics as a function of ageing. These properties will be used as input to novel computational models, to derive predictions of the plastics’ lifetime under various environments.

Research objectives include:

Establish the make-up of recycled plastics mostly found in museum collections to determine the materials that will be the focus of the study.
Establish methods for making mock-up samples out of the identified materials.
Survey gallery conditions in order to set up suitable ageing conditions.
Perform accelerated ageing tests using mock – ups and determine degradation in mechanical, thermophysical or optical properties. Correlate with plasticisation, embrittlement, cracking and colour, gloss or texture changes.
Develop computational modelling tools for predicting environmental ageing and the associated degradation of the polymers.

Research with V&A

This research studentship is one allocated to V&A by the AHRC to support the collaboration between conservation specialists at the V&A and the research of Prof Charalambides’s team. The successful student will be expected to spend time carrying out research and gaining relevant experience at the V&A as part of the studentship.

CDP doctoral training grants fund full-time studentships for 48 months or part time equivalent. The award pays full maintenance for all students, both home and international students. The National Minimum Doctoral Stipend for 2024/2025 is £19,237 plus London Weighting of £2000/year. There is also a CDP maintenance payment of £600 per year. CDP students will have access to training and development opportunities throughout their PhD, supported and facilitated by the CDP Consortium, Imperial College London, and the V&A. CDP students are expected to undertake a work placement or development opportunity for a minimum of a 3-month period (or part-time equivalent).

Further guidance can be found on the UKRI website .

Applicants should ideally have or expect to receive a relevant Masters-level qualification in a relevant subject Mechanical Engineering, Conservation Science or a related subject, or be able to demonstrate equivalent experience in a professional setting.
Applicants must be able to demonstrate an interest in the art conservation sector or mechanical engineering as well as potential and enthusiasm for developing skills more widely in related areas.
As a collaborative award, students will be expected to spend time at both the University and the V&A. All applicants must meet UKRI terms and conditions for funding .

For further details of the post contact Prof Maria Charalambides m.charalambides @imperial.ac.uk or Dr Valentina Risdonne [email protected] . Interested applicants should send an up-to-date curriculum vitae to Prof Charalambides. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be addressed by College Registry.

Reasonable Adjustments and Support for Applicants

Support or adjustments may include (but are not limited to):

Opportunity to speak with project supervisors about the project and the process.
Opportunity to speak regarding institutional support systems (e.g. neurodiversity, racial diversity and LGBTQIA+ networks, mental health support, support for carers).
An insight into the interview process (e.g. selection criteria used).
Opportunity to visit the relevant building and room prior to interview, as well as on-site guidance (demonstrating accessible routes and/or familiarity with building layouts for example)
Opportunity to speak with active CDP students to ask questions regarding student experience as part of the CDP scheme.

The V&A has made a commitment to the principle of equality, diversity and inclusion (EDI) for all and strives to go beyond public duty placed upon us by the Equality Act 2010. We believe that all our employees, volunteers and contracted suppliers should find the V&A to be a supportive and nurturing environment free from bullying, harassment, discrimination or victimisation, and we hope that we can support this to be the case through our proactive EDI work. Full details of our EDI intentions can be found in our Corporate EDI Strategy and Action Plan 2022-2025 .

PhD Studentship Novel Metal-metal Solid Bonding Technique (Jun Jiang)

Applications are invited for a research studentship in the field of advanced manufacturing technologies, leading to the award of a PhD degree. The position is supported by a bursary and fees (at the UK student rate) provided by various industry stakeholders, including Commonwealth Fusion Systems, UKAEA, Alfa Laval, SMT, and British Gear Associate, emphasising its significant industrial relevance and potential.

Dr Jiang's group at Imperial College has invented a ground-breaking solid-bonding technology that seamlessly integrates cold bonding with diffusion bonding, all in open-air conditions. This innovative method has demonstrated exceptional results, such as maintaining base metal properties with minimal deformation. Its advantages encompass high joint strength, precision, cost-effectiveness, scalability, and much more, earning its 1st place in the Fusion Manufacturing Challenges 2023 at TechConnect, Washington.

The prime focus of this PhD will be to develop and optimise this revolutionary welding technique for manufacturing industry-representative nuclear fusion components (like tungsten-316L or vanadium) or creating bimetallic Al-Fe lightweight gears for transmission systems. With access to the state-ofthe-art Gleeble 3800 testing facility, the candidate will investigate deep into understanding the intricacies of bonding mechanisms. This will encompass studies on oxide evolution, grain boundary migration, and void closure. Using cutting-edge in-situ thermal micromechanical testing and characterisation units Tescan Clara+ Oxford Instrument EBSD Symmetry 2, EDX, the student will explore the microstructure evolution at the solid bonding joints. Furthermore, the project will also encompass developing physically based constitutive equations to numerically portray these bonding mechanisms, facilitating the simulation and optimisation of the welding process.

Ideal candidates should be passionate and self-motivated and meet the academic prerequisites for enrolment in the PhD degree at Imperial College London. Possession of a first-class honours degree in Mechanical/Material Engineering or a related field is essential. The student should demonstrate robust project and communication skills and possess a keen interest in advanced manufacturing, welding, mechanics of materials, and materials science.

To understand more about research at Imperial College London in this sphere, visit: https://www.imperial.ac.uk/mechanical-engineering/research/

For application guidance, please refer to: http://www.imperial.ac.uk/mechanical-engineering/study/phd/how-to-apply/

For any further details about this position, please get in touch with Dr Jun Jiang at [email protected] . Prospective applicants should forward an updated CV to Dr Jiang. Suitable candidates must complete an electronic application form at Imperial College London, ensuring their credentials are assessed by the College Registry.

PhD Studentship on Thermoacoustic instability in hydrogen-rich combustors (Prof Aimee Morgans)

Supervisor: Aimee Morgans

Applications are invited for a research studentship in the field of fluid dynamics, leading to the award of a PhD degree. The post is supported by a bursary and fees (at the UK student rate) provided by the EPSRC through an iCASE studentship with Siemens Energy. Candidates must demonstrate relevant connection with the UK, usually established by residence, as is standard for EPSRC funding.

Thermoacoustic instability is caused by a two-way coupling between acoustics waves and unsteady combustion. It can occur in the combustors of gas turbines and leads to damaging high amplitude oscillations. The need to decarbonize energy generation is driving the transition to hydrogen as a fuel. However, hydrogen enrichment increases propensity to thermoacoustic instability. In order to design-out thermoacoustic instability, accurate and efficient methods for its computational prediction are needed. Multi-scale computations, which couple different treatments for the acoustic waves and the flame, are particularly efficient. The acoustic waves are captured using linear, wave-based models, while the flame unsteadiness is obtained using computational fluid dynamics in the form of large eddy simulations (LES). These coupled approaches have been applied with success to predict thermoacoustic instability in real combustors, but not as yet for hydrogen-rich combustors.

This PhD will work towards this in two key ways. Firstly, to deal with hydrogen’s vastly different properties – its fast flame speed, low density, high diffusivity etc - compared to traditional fuels, the best flame simulation tools for thermoacoustic predictions will be investigated. Secondly, for the largest, most efficient gas turbines, combustion occurs in separate but linked “cans”. New acoustic models will be developed for multiple cans interacting at their downstream end.

The project will combine mathematical modelling and flow simulations for hydrogen combustion, the latter using the OpenFOAM CFD package. Machine learning will be used to model the effect of hydrogen enrichment on the flame. The project will work towards fully computational prediction of thermoacoustic instability in an experimental hydrogen-rich lab combustor (at a collaborator’s lab) which can operate in single-can, two-can and three-can modes.

You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You will have a 1st class honours degree in mechanical engineering or related subject and demonstrate excellent project-work and communication skills. You will be interested in fluid dynamics, acoustics and computational fluid dynamics. You will join a supportive and inclusive research group and benefit from co-supervision with the Siemens Energy partner.

For further details of the post contact Prof Aimee Morgans, [email protected] . Interested and eligible applicants should send an up-to-date curriculum vitae to Prof Morgans. Suitable candidates will be required to complete an electronic application form at Imperial College London in order for their qualifications to be addressed by College Registry.

Ongoing opportunities

Research groups.

The following research groups have flexible funding, which may enable them to provide funding for outstanding PhD students at any time. Please visit the group websites for more information and to get in touch with a member of the group:

Non-Destructive Evaluation Group
Metal Forming and Materials Modelling Group

Centres for Doctoral Training

You may wish to explore the opportunities offered by the following Centres for Doctoral Training:

CDT in Fluid Dynamics across Scales
CDT in Nuclear Energy
CDT in Theory and Simulation of Materials
CDT in Quantitative Non-destructive Evaluation

You may wish to explore the opportunities offered by the SKF University Technology Centre in Advanced Modelling and Measurements in Tribology

Website navigation

In this section

Imperial Home
Postgraduate doctoral
Application process
Choose a course

Integrated PhD

Mr Gary Kass, Natural England, gives a talk to SSCP DTP students during the Sustainability module

Studentships

Funding for our CDTs and DTPs is provided by Research Councils so eligibility criteria apply for the studentships that they offer. This is outlined on the UK Research and Innovation website . They may also consider self-funding applicants for non-funded projects.

A new model of Doctoral training

Integrated PhDs provide a new model of postgraduate training. They retain the depth, rigour and focus of a conventional PhD while also providing a broader training experience.

While the specific training routes may vary, they typically consist of a one-year Master's course (MSc or MRes) which leads straight into a three-year PhD.

This new style of doctoral training is available within our Research Council-funded Centres for Doctoral Training (CDTs) and Doctoral Training Partnerships (DTPs).

CDTs and DTPs

Our CDTs and DTPs recruit cohorts of students from a broad spectrum of disciplines, creating vibrant multi-disciplinary communities.

The diversity of students recruited to these centres reflects the breadth of research which they cover.

As well as benefitting from a variety of training opportunities and cohort-building activities, students studying within these centres may also have access to a supervisor and facilities at a partner institution.

Doctoral Training Partnerships (DTPs)

We offer the following DTPs:

Science and Solutions for a Changing Planet , funded by the Natural Environment Research Council (NERC) and hosted by the Grantham Institute – Climate Change and the Environment.
Medical Research Council Studentships – Imperial College Medical Research Council Doctoral Training Partnership (DTP) , funded by the Medical Research Council (MRC)
Photonics , available through several EPSRC-funded Doctoral Training Partnerships (DTPs) in which Photonics research group members are involved.

Imperial is also a partner in London Interdisciplinary Social Science Doctoral Training Partnership (LISS) , funded by the Economic and Social Research Council (ESRC).

Centres for Doctoral Training (CDTs)

Imperial currently hosts the following Centres for Doctoral Training. Explore the centres that interest you to find out more about their training programme and available studentships.

Advanced Characterisation of Materials
Artificial Intelligence for Healthcare – UKRI Centre for Doctoral Training
BioDesign Engineering
Chemical Biology - Innovation for the Life Sciences
Modern Statistics and Statistical Machine Learning
Next Generation Synthesis and Reaction Technology
Nuclear Energy Futures

We have 79 imperial college PhD Projects, Programmes & Scholarships

All disciplines

All locations

Institution

All Institutions

All PhD Types

All Funding

imperial college PhD Projects, Programmes & Scholarships

Investigating the phase separation underlying the transcriptional regulation and 3d chromatin organisation in acute myeloid leukaemia (aml) pathogenesis., phd research project.

PhD Research Projects are advertised opportunities to examine a pre-defined topic or answer a stated research question. Some projects may also provide scope for you to propose your own ideas and approaches.

Funded PhD Project (UK Students Only)

This research project has funding attached. It is only available to UK citizens or those who have been resident in the UK for a period of 3 years or more. Some projects, which are funded by charities or by the universities themselves may have more stringent restrictions.

PhD Studentship in Tribology: Fundamental understanding of water-based lubricants for hydraulic and EV applications – Industrial CASE (ICASE) with Shell

Phd studentship in tribology/metal forming and materials modelling next generation patterned steel floors for best in class slip resistance performance – industrial case with tata steel, fully-funded phd position available in synthetic organometallic chemistry for functional materials at the department of chemistry, imperial college london, design, manufacturing and characterisation of functional and green end-of-life cellulose-based materials (ref: ae0052), phd studentship in novel metal-metal solid bonding technique, fully-funded phd position available in data-driven design of amorphous porous materials at the department of chemistry, imperial college london, funded phd project (students worldwide).

This project has funding attached, subject to eligibility criteria. Applications for the project are welcome from all suitably qualified candidates, but its funding may be restricted to a limited set of nationalities. You should check the project and department details for more information.

PhD Studentship in Molecular Simulations of Food Biotribology

Contribute to the clean energy transition: phd studentship in the effects of hydrogen on the performance of machine elements, phd studentship in battery fire safety, phd studentship in development of a vibration management concept for gas turbine engines, phd studentship in laser processing of challenging materials, phd studentship in in-process evaluation of battery electrodes, phd studentship in shear band modelling, competition funded phd project (students worldwide).

This project is in competition for funding with other projects. Usually the project which receives the best applicant will be successful. Unsuccessful projects may still go ahead as self-funded opportunities. Applications for the project are welcome from all suitably qualified candidates, but potential funding may be restricted to a limited set of nationalities. You should check the project and department details for more information.

PhD Studentship in Optimal Frictional Damping in Bladed Discs Under Rotating Conditions

Unknown ( change )

Have you got time to answer some quick questions about PhD study?

Select your nearest city

You haven’t completed your profile yet. To get the most out of FindAPhD, finish your profile and receive these benefits:

Monthly chance to win one of ten £10 Amazon vouchers ; winners will be notified every month.*
The latest PhD projects delivered straight to your inbox
Access to our £6,000 scholarship competition
Weekly newsletter with funding opportunities, research proposal tips and much more
Early access to our physical and virtual postgraduate study fairs

Or begin browsing FindAPhD.com

or begin browsing FindAPhD.com

*Offer only available for the duration of your active subscription, and subject to change. You MUST claim your prize within 72 hours, if not we will redraw.

Do you want hassle-free information and advice?

Create your FindAPhD account and sign up to our newsletter:

Find out about funding opportunities and application tips
Receive weekly advice, student stories and the latest PhD news
Hear about our upcoming study fairs
Save your favourite projects, track enquiries and get personalised subject updates

Create your account

Looking to list your PhD opportunities? Log in here .

Filtering Results

How MSc Strategic Marketing has shaped me

Our MSc Strategic Marketing leverages the Business School's top marketing faculty and experts in strategy, entrepreneurship, and technology. The programme uniquely integrates marketing fundamentals with cutting-edge technology and data-driven decision-making. Suhani Gupta , a MSc Strategic Marketing student, shares her reflections on the enriching journey of studying this dynamic programme.

The MSc Strategic Marketing programme has given me a global perspective and showed that possibilities are endless, so keep on expanding your horizons.

London, a city rich in history and innovation, where cobblestone streets echo with countless tales. Just as Arthur Conan Doyle brought Sherlock Holmes' adventures to life on these very streets, my own journey began when I joined Imperial College Business School.

Choosing Imperial College Business School

With an engineering background and a stint at a top management consulting firm, I felt there were still missing pieces in my career puzzle. It became clear that marketing was the key to completing that picture.

Applying to the MSc Strategic Marketing at Imperial was a clear choice. It has turned out to be the ideal blend of everything I had envisioned. While the prestigious ranking and the Imperial's esteemed reputation are significant draws, what truly sets this programme apart is its comprehensive approach. It’s not merely marketing; it’s a fusion of strategy, entrepreneurship, and innovation. As I look back on my journey so far, here are my reflections.

Saina presenting a lecture slide in class

Embracing the unknown

Embrace the unknown there and take risks. Initially daunting, I had to step out of my comfort zone to improve in areas where I felt less confident. The programme has helped me enhance my presentation and time management skills and take on leadership roles, fostering personal growth and newfound confidence in my abilities.

I always thought marketing was just about creativity, but as I near the end of my programme, I realised it’s much more layered. MSc Strategic Marketing has taught us to think strategically and adopt an entrepreneurial mindset, preparing us to be future leaders. It has made me even more curious and observant. Staying abreast of industry trends and continuously learning new skills is crucial to staying ahead in our careers.

Learning at Imperial

There will be opportunities for you to choose your electives, to fill gaps in your knowledge. I thoroughly enjoyed electives like Effective Crisis Management and Market Decision Making which were different from what I had studied and gave me an insight into what goes behind building a successful business. Apart from this, it is imperative to make the right choice for the summer term. I opted for a consulting project from the other options available because I wanted to apply my learnings to a practical setup and working with a client like Pladis, one of the largest biscuit manufacturers in the world has been one of the most rewarding experiences.

Learning at Imperial goes well beyond the classroom. Since the beginning, I have been actively involved in various clubs, holding positions such as Chief Marketing Officer for the India Business Careers Club and Head of Retail for the FMCG, Luxury, and Retail Careers Club. I also dedicated time to volunteering for Imperial-supported events and social causes. Additionally, I enjoyed the opportunity to choreograph for the annual cultural event of the Indian Society. This involvement has not only enriched my educational journey but also equipped me with leadership skills and provided invaluable exposure to diverse aspects of student life, making my experience fulfilling.

Students from Indian Society strike pose

We’ve all heard the saying "Teamwork makes the Dream work," a significant portion of the coursework here revolves around group projects but experiencing it first-hand was more challenging than I expected. Collaborating with students from diverse backgrounds, each bringing a unique perspective, has been both intellectually stimulating and humbling. It required mastering the art of unlearning and relearning, more than just dividing tasks—it’s been about leveraging each person’s unique strengths to achieve a common goal. And, in this journey, you come to realise that your team members often become lifelong friends.

Value of Networking

You quickly learn that "one's network is their net worth." The programme provides countless avenues like Career fairs, and guest sessions, allowing you to forge strong relationships with leaders you look up to. A standout experience for me was the CMP lectures delivered by the industry experts that helped build a deeper understanding of several topics and breakfast with board events during the Woman@Imperial Week, where sessions offered the chance to engage in profound conversations with trailblazing women.

The MSc Strategic Marketing programme has given me a global perspective and showed that possibilities are endless, so keep on expanding your horizons. Don’t come here only for just world-class rankings, groundbreaking research or industry-rooted courses, Imperial is about a transformational journey that prepares you for life and this journey for me has been the culmination of a childhood dream and I would do it all over again.

IMAGES

50 PhD Positions at Imperial College London 2024, UK [Fully Funded]
PhD Scholarships at Imperial College London
Find PhDs
PhD study
Graduation 2019
Phd Courses in Imperial College London,London

COMMENTS

PhD
A PhD (Doctor of Philosophy) is the most common type of doctoral degree and the highest level of academic qualification you can achieve. It normally takes between three and four years of full-time work to complete. It is also possible to undertake a PhD part time, over five to six years. The main activity of a PhD is to carry out an original ...
Imperial College London PhD Projects, Programmes & Scholarships
Imperial College London National Heart and Lung Institute. Applications are invited for a 3-year PhD studentship starting in mid-late autumn 2024 from candidates with a Master's degree (Merit and above) in Immunology or a related discipline. Read more. Supervisors: Dr L Yates, Prof C Lloyd, Prof S Saglani.
PhD Programme
Programme content. The Business School Master's in Research (MRes) is an integral part of the PhD, introducing theory and research methods in Finance, Economics and Management, providing you with a solid foundation for your doctoral studies. Depending on the research area you choose to specialise in, you will embark on a one or two-year MRes ...
PhD
Research Projects. 49 Research Projects. PhD Opportunities. EPSRC Centre for Doctoral Training in Chemical Biology - Empowering UK BioTech Innovation. EPSRC Centre for Doctoral Training in the Mathematics for our Future Climate: Theory, Data and Simulation. Fully-funded EPSRC Centre for Doctoral Training in Green Industrial Futures.
Postgraduate doctoral
Postgraduate doctoral admissions process. Applying as an international student may involve a few extra steps. Find out all you need below. Apply now Applying for a student visa Fee status and CAS. Follow the steps below to apply for a postgraduate doctoral course. You may only be considered for a maximum of two courses in any one admission ...
PhD
PhD study is offered across the College. To search for opportunities based on your own research idea you first need to identify a research group whose objectives best match your idea. If you find a suitable group, you normally need to identify a potential supervisor before submitting an application. This is an important step, as you will need ...
PhD opportunities
It has a research degree student body of 400 PhD and MD (Res) students making up one-tenth of Imperial College's research degree student population. The Department welcomes research degree applications from around the world, provided that they meet Imperial College's eligibility criteria. Our supervisors are outstanding scientists and ...
PhD opportunities
View the latest PhD opportunities within each Department. Department PhDs. Brain Sciences. To learn more about our studentships. ... Imperial College London. Address. Imperial College London South Kensington Campus London SW7 2AZ, UK tel: +44 (0)20 7589 5111. Facebook X, formerly known as Twitter YouTube LinkedIn Instagram TikTok.
Postgraduate research admissions (PhD)
Find a PhD Supervisor. Research Areas. The Department is comprised of 7 research sections. We also participate in a number of Centres for Doctoral Training ... Imperial College London. Skempton Building South Kensington Campus London, SW7 2AZ +44 (0)20 7594 5929 / 5932 / 5931. [email protected].
PhD/MPhil Research Degreees
PhD/MPhil Research Degrees Introduction. The Department of Computing at Imperial College is an internationally leading research institution which offers an exciting research environment for prospective postgraduate students. It has consistently been awarded the highest research rating (5*) in the UK Research Assessment Exercises, including the ...
PhD admissions
As a PhD graduate of Imperial College Business School, you will be expected to have a solid foundation in quantitative research methods, understand the breadth of your research area and have in depth knowledge of your specific field demonstrated through your own original research. Graduates who are working in primarily qualitative fields are ...
PhD/MPhil Research Degreees
It has consistently been awarded the highest research rating (5*) in Research Assessment Exercises, including the most recent one held in 2001, and was rated as "Excellent" in the previous national assessment of teaching quality. Two research degree programmes are offered, one leading to the MPhil degree and the other to the PhD degree.
Current PhD studentships
You will be an enthusiastic and self-motivated person who meets the academic requirements for enrolment for the PhD degree at Imperial College London. You should hold or expect to obtain a First-Class Honours or a high 2:1 degree at Master's level (or equivalent) in Mechanical Engineering, another branch of relevant engineering, Materials ...
Physics, Ph.D.
Physics PhD research at the Imperial can be undertaken with any of our nine research groups. Imperial. London , England , United Kingdom. Top 0.1% worldwide. Studyportals University Meta Ranking. 4.2 Read 77 reviews. You can apply for and start this programme anytime. Our application deadline is 1st February each year.
Integrated PhD
A new model of Doctoral training. Integrated PhDs provide a new model of postgraduate training. They retain the depth, rigour and focus of a conventional PhD while also providing a broader training experience. While the specific training routes may vary, they typically consist of a one-year Master's course (MSc or MRes) which leads straight ...
Imperial College London PhD Projects, Programmes ...
Imperial College London National Heart and Lung Institute. Applications are invited for a 3-year PhD studentship starting in mid-late autumn 2024 from candidates with a Master's degree (Merit and above) in Immunology or a related discipline. Read more. Supervisors: Dr L Yates, Prof C Lloyd, Prof S Saglani.
Chemistry, Ph.D.
Studying for a PhD in the Department of Chemistry at Imperial will provide you with access to world-class research facilities as well as the opportunity to take advantage of the many transferable skills training courses that are offered both within the Department and at the Imperial. Imperial. London , England , United Kingdom. Top 0.1% worldwide.
Integrated PhD
Information about pursuing an integrated PhD at Imperial. Doctoral Training Partnerships (DTPs) We offer the following DTPs: Science and Solutions for a Changing Planet, funded by the Natural Environment Research Council (NERC) and hosted by the Grantham Institute - Climate Change and the Environment.; Medical Research Council Studentships - Imperial College Medical Research Council ...
Imperial College London hiring Research Associate in AI for Chemistry
Act as the representative for Imperial College London in meetings, conference calls and present research at conferences, workshops, and open days, and publish research results in journals. ... Candidates who have not yet been officially awarded their PhD will be appointed as Research Assistant within the salary range £41,694 - £44,888 per annum.
Imperial College London PhD Projects, Programmes ...
Mechanisms determining the protective impact of the farm environment in the development of early - life allergy and asthma. Imperial College London National Heart and Lung Institute. Applications are invited for a 3-year PhD studentship starting in mid-late autumn 2024 from candidates with a Master's degree (Merit and above) in Immunology ...
imperial college PhD Projects, Programmes & Scholarships
A consumables budget is also provided. Applications are invited for a 3-year PhD studentship based in the Centre for Haematology, Department of Immunology & Inflammation at Imperial College London. Read more. Supervisor: Dr S Agrawal-Singh. 31 October 2024 PhD Research Project Funded PhD Project (UK Students Only)
Postgraduate doctoral
Integrated PhD (1+3) Find out more about this funded model of doctoral training, typically consisting of a one-year Master's course, leading straight into a three-year PhD. Explore our integrated PhDs.
Finding a supervisor
Finding a supervisor. Finding a supervisor depends on which PhD route you're taking: you're applying for a funded research project (studentship); or. you're putting forward your own research proposal. If you're applying for a studentship, your supervisor will usually be the academic who made the funding application for the research project.
Engagement, Funding and Impact Masterclass
Doctoral students attending the Communication in Engagement masterclass will receive 1 credit from the Graduate School. If you are unsure about whether this session is for you, please contact [email protected]. Learning Outcomes . On completion of this session, you will be better able to:
Moving to London: Finding My Stride at Imperial College Business School
Saina Kalra is currently pursuing an MSc in Strategic Marketing at Imperial College Business School. She has transitioned into this programme in London, blending innovative marketing strategies with advanced business insights. Join us as we explore her journey, the challenges she faces, and the triumphs she achieves in this exciting new chapter of her academic career.
How MSc Strategic Marketing has shaped me
Our MSc Strategic Marketing leverages the Business School's top marketing faculty and experts in strategy, entrepreneurship, and technology. The programme uniquely integrates marketing fundamentals with cutting-edge technology and data-driven decision-making. Suhani Gupta, a MSc Strategic Marketing student, shares her reflections on the enriching journey of studying this dynamic programme.