• How it works

Useful Links

How much will your dissertation cost?

Have an expert academic write your dissertation paper!

Dissertation Services

Dissertation Services

Get unlimited topic ideas and a dissertation plan for just £45.00

Order topics and plan

Order topics and plan

Get 1 free topic in your area of study with aim and justification

Yes I want the free topic

Yes I want the free topic

The Best Mechanical Engineering Dissertation Topics and Titles

Published by Carmen Troy at January 5th, 2023 , Revised On April 25, 2024

Introduction 

Engineering is a vast subject that encompasses different branches for a student to choose from. Mechanical engineering is one of these branches , and one thing that trips students in the practical field is dissertation . Writing a mechanical engineering dissertation from scratch is a difficult task due to the complexities involved, but the job is still not impossible.

To write an excellent dissertation, you first need a stellar research topic. Are you looking to select the best mechanical engineering dissertation topic for your dissertation? To help you get started with brainstorming for mechanical engineering dissertation topics, we have developed a list of the latest topics that can be used for writing your mechanical engineering dissertation.

These topics have been developed by PhD-qualified writers on our team, so you can trust them to use these topics for drafting your own dissertation.

You may also want to start your dissertation by requesting a brief research proposal from our writers on any of these topics, which includes an introduction to the topic, research question, aim and objectives, literature review, and the proposed methodology of research to be conducted. Let us know  if you need any help in getting started.

Check our  dissertation example to get an idea of  how to structure your dissertation .

Review the step-by-step guide on how to write your own dissertation here.

2024 Mechanical Engineering Research Topics

Topic 1: an investigation into the applications of iot in autonomous and connected vehicles.

Research Aim: The research aims to investigate the applications of IoT in autonomous and connected vehicles

Objectives:

  • To analyse the applications of IoT in mechanical engineering
  • To evaluate the communication technologies in autonomous and connected vehicles.
  • To investigate how IoT facilitates the interaction of smart devices in autonomous and connected vehicles

Topic 2: Evaluation of the impact of combustion of alternative liquid fuels on the internal combustion engines of automobiles

Research Aim: The research aims to evaluate the impact of the combustion of alternative liquid fuels on the internal combustion engines of automobiles

  • To analyse the types of alternative liquid fuels for vehicles and their implications
  • To investigate the benchmarking of alternative liquid fuels based on the principles of combustion performance.
  • To evaluate the impact of combustion of alternative liquid fuels on the internal combustion engines of automobiles with conventional engines

Topic 3: An evaluation of the design and control effectiveness of production engineering on rapid prototyping and intelligent manufacturing

Research Aim: The research aims to evaluate the design and control effectiveness of production engineering on rapid prototyping and intelligent manufacturing

  • To analyse the principles of design and control effectiveness of production engineering.
  • To determine the principles of rapid prototyping and intelligent manufacturing for ensuring quality and performance effectiveness
  • To evaluate the impact of production engineering on the design and control effectiveness of rapid prototyping and intelligent manufacturing.

Topic 4: Investigating the impact of industrial quality control on the quality, reliability and maintenance in industrial manufacturing

Research Aim: The research aims to investigate the impact of industrial quality control on the quality, reliability and maintenance in industrial manufacturing

  • To analyse the concept and international standards associated with industrial quality control.
  • To determine the strategies for maintaining quality, reliability and maintenance in manufacturing.
  • To investigate the impact of industrial quality control on the quality, reliability and maintenance in industrial manufacturing.

Topic 5: Analysis of the impact of AI on intelligent control and precision of mechanical manufacturing

Research Aim: The research aims to analyse the impact of AI on intelligent control and precision of mechanical manufacturing

  • To analyse the applications of AI in mechanical manufacturing
  • To evaluate the methods of intelligent control and precision of the manufacturing
  • To investigate the impact of AI on intelligent control and precision of mechanical manufacturing for ensuring quality and reliability

COVID-19 Mechanical Engineering Research Topics

Investigate the impacts of coronavirus on mechanical engineering and mechanical engineers..

Research Aim: This research will focus on identifying the impacts of Coronavirus on mechanical engineering and mechanical engineers, along with its possible solutions.

Research to study the contribution of mechanical engineers to combat a COVID-19 pandemic

Research Aim: This study will identify the contributions of mechanical engineers to combat the COVID-19 pandemic highlighting the challenges faced by them and their outcomes. How far did their contributions help combat the Coronavirus pandemic?

Research to know about the transformation of industries after the pandemic.

Research Aim: The study aims to investigate the transformation of industries after the pandemic. The study will answer questions such as, how manufacturing industries will transform after COVID-19. Discuss the advantages and disadvantages.

Damage caused by Coronavirus to supply chain of manufacturing industries

Research Aim: The focus of the study will be on identifying the damage caused to the supply chain of manufacturing industries due to the COVID-19 pandemic. What measures are taken to recover the loss and to ensure the continuity of business?

Research to identify the contribution of mechanical engineers in running the business through remote working.

Research Aim: This study will identify whether remote working is an effective way to recover the loss caused by the COVID-19 pandemic? What are its advantages and disadvantages? What steps should be taken to overcome the challenges faced by remote workers?

Mechanical Engineering Dissertation Topics of 2024

Topic 1: mini powdered metal design and fabrication for mini development of waste aluminium cannes and fabrication.

Research Aim: The research will focus on producing and manufacturing copula furnaces and aluminium atomisers with available materials to manufacture aluminium powder metal.0.4 kg of refined coke will be chosen to measure content and energy balance and calculate the design values used to produce the drawings.

Topic 2: Interaction between the Fluid, Acoustic, and vibrations

Research Aim: This research aims to focus on the interaction between the Fluid, Acoustic, and vibrations

Topic 3: Combustion and Energy Systems.

Research Aim: This research aims to identify the relationship between Combustion and Energy Systems

Topic 4: Study on the Design and Manufacturing

Research Aim: This research will focus on the importance of design and manufacturing

Topic 5: Revolution in the Design Engineering

Research Aim: This research aims to highlight the advances in design engineering

Topic 6: Optimising HVAC Systems for Energy Efficiency

Research Aim: The study investigates different design configurations and operational strategies to optimise heating, ventilation, and air conditioning (HVAC) systems for energy efficiency while maintaining indoor comfort levels.

Topic 7: Impact of Building Design Parameters on Indoor Thermal Comfort

Research Aim: The research explores the impact of building design parameters, such as insulation, glazing, shading, and ventilation, on indoor thermal comfort and energy consumption.

Topic 8: An Empirical Analysis of Enhanced Security and Privacy Measures for Call Taxi Metres

Research Aim: The research explores the methods to enhance the security and privacy of call taxi meter systems. It explores encryption techniques for sensitive data transmission and authentication protocols for driver and passenger verification.

Topic 9: An Investigation of Optimising Manifold Design

Research Aim: The study investigates various designs for manifolds used in HBr/HCl charging systems. It focuses on factors such as material compatibility, pressure control, flow rates, and safety protocols. 

Topic 10: Implementation of a Plant Lean Transformation

Research Aim: The research examines the implementation process and outcomes of a Lean Transformation in a plant environment. It focuses on identifying the key factors contributing to successful adoption and sustained improvement in operational efficiency. 

Topic 11: Exploring Finite Element Analysis (FEA) of Torque Limiters

Research Aim: Exploring the use of FEA techniques to simulate the behaviour of torque limiters under various loading conditions. The research provides insights into stress distribution and deformation.

Best Mechanical Dissertation Topics of 2024

Topic 1: an overview of the different research trends in the field of mechanical engineering..

Research Aim: This research aims to analyse the main topics of mechanical engineering explored by other researchers in the last decade and the research methods. The data used is accumulated from 2009 to 2019. The data used for this research is used from the “Applied Mechanics Review” magazine.

Topic 2: The Engineering Applications of Mechanical Metamaterials.

Research Aim: This research aims to analyse the different properties of various mechanical metamaterials and how they can be used in mechanical engineering. This research will also discuss the potential uses of these materials in other industries and future developments in this field.

Topic 3: The Mechanical Behaviour of Materials.

Research Aim: This research will look into the properties of selected materials for the formation of a product. The study will take the results of tests that have already been carried out on the materials. The materials will be categorised into two classes from the already prepared results, namely destructive and non-destructive. The further uses of the non-destructive materials will be discussed briefly.

Topic 4: Evaluating and Assessment of the Flammable and Mechanical Properties of Magnesium Oxide as a Material for SLS Process.

Research Aim: The research will evaluate the different properties of magnesium oxide (MgO) and its potential use as a raw material for the SLS (Selective Laser Sintering) process. The flammability and other mechanical properties will be analysed.

Topic 5: Analysing the Mechanical Characteristics of 3-D Printed Composites.

Research Aim: This research will study the various materials used in 3-D printing and their composition. This research will discuss the properties of different printing materials and compare the harms and benefits of using each material.

Topic 6: Evaluation of a Master Cylinder and Its Use.

Research Aim: This research will take an in-depth analysis of a master cylinder. The material used to create the cylinder, along with its properties, will be discussed. The use of the master cylinder in mechanical engineering will also be explained.

Topic 7: Manufacturing Pearlitic Rail Steel After Re-Modelling Its Mechanical Properties.

Research Aim: This research will look into the use of modified Pearlitic rail steel in railway transportation. Modifications of tensile strength, the supported weight, and impact toughness will be analysed. Results of previously applied tests will be used.

How Can ResearchProspect Help?

ResearchProspect writers can send several custom topic ideas to your email address. Once you have chosen a topic that suits your needs and interests, you can order for our dissertation outline service , which will include a brief introduction to the topic, research questions , literature review , methodology , expected results , and conclusion . The dissertation outline will enable you to review the quality of our work before placing the order for our full dissertation writing service !

Electro-Mechanical Dissertation Topics

Topic 8: studying the electro-mechanical properties of multi-functional glass fibre/epoxy reinforced composites..

Research Aim: This research will study the properties of epoxy-reinforced glass fibres and their use in modern times. Features such as tensile strength and tensile resistance will be analysed using Topic 13: Studying the Mechanical and Durability different current strengths. Results from previous tests will be used to explain their properties.

Topic 9: Comparing The Elastic Modules of Different Materials at Different Strain Rates and Temperatures.

Research Aim: This research will compare and contrast a selected group of materials and look into their elastic modules. The modules used are the results taken from previously carried out experiments. This will explain why a particular material is used for a specific purpose.

Topic 10: Analysing The Change in The Porosity and Mechanical Properties of Concrete When Mixed With Coconut Sawdust.

Research Aim: This research will analyse the properties of concrete that are altered when mixed with coconut sawdust. Porosity and other mechanical properties will be evaluated using the results of previous experiments. The use of this type of concrete in the construction industry will also be discussed.

Topic 11: Evaluation of The Thermal Resistance of Select Materials in Mechanical Contact at Sub-Ambient Temperatures.

Research Aim: In this research, a close evaluation of the difference in thermal resistance of certain materials when they come in contact with a surface at sub-ambient temperature. The properties of the materials at the temperature will be noted. Results from previously carried out experiments will be used. The use of these materials will be discussed and explained, as well.

Topic 12: Analysing The Mechanical Properties of a Composite Sandwich by Using The Bending Test.

Research Aim: In this research, we will analyse the mechanical properties of the components of a composite sandwich through the use of the bending test. The results of the tests previously carried out will be used. The research will take an in-depth evaluation of the mechanical properties of the sandwich and explain the means that it is used in modern industries.

Mechanical Properties Dissertation Topics

Topic 13: studying the mechanical and durability properties of magnesium silicate hydrate binders in concrete..

Research Aim: In this research, we will evaluate the difference in durability and mechanical properties between regular concrete binders and magnesium silicate hydrate binders. The difference between the properties of both binders will indicate which binder is better for concrete. Features such as tensile strength and weight it can support are compared.

Topic 14: The Use of Submersible Pumping Systems.

Research Aim: This research will aim to analyse the use of a submersible pumping system in machine systems. The materials used to make the system, as well as the mechanical properties it possesses, will be discussed.

Topic 15: The Function of a Breather Device for Internal Combustion Engines.

Research Aim: In this research, the primary function of a breather device for an internal combustion engine is discussed. The placement of this device in the system, along with its importance, is explained. The effects on the internal combustion engine if the breather device is removed will also be observed.

Topic 16: To Study The Compression and Tension Behaviour of Hollow Polyester Monofilaments.

Research Aim: This research will focus on the study of selected mechanical properties of hollow polyester monofilaments. In this case, the compression and tension behaviour of the filaments is studied. These properties are considered in order to explore the future use of these filaments in the textile industry and other related industries.

Topic 17: Evaluating the Mechanical Properties of Carbon-Nanotube-Reinforced Cementous Materials.

Research Aim: This research will focus on selecting the proper carbon nanotube type, which will be able to improve the mechanical properties of cementitious materials. Changes in the length, diameter, and weight-based concentration of the nanotubes will be noted when analysing the difference in the mechanical properties. One character of the nanotubes will be of optimal value while the other two will be altered. Results of previous experiments will be used.

Topic 18: To Evaluate the Process of Parallel Compression in LNG Plants Using a Positive Displacement Compressor

Research Aim: This research aims to evaluate a system and method in which the capacity and efficiency of the process of liquefaction of natural gas can avoid bottlenecking in its refrigerant compressing system. The Advantages of the parallel compression system in the oil and gas industry will be discussed.

Topic 19: Applying Particulate Palm Kernel Shell Reinforced Epoxy Composites for Automobiles.

Research Aim: In this research, the differences made in applying palm kernel shell particulate to reinforced epoxy composites for the manufacturing of automobile parts will be examined. Properties such as impact toughness, wear resistance, flexural, tensile, and water resistance will be analysed carefully. The results of the previous tests will be used. The potential use of this material will also be discussed.

Topic 20: Changes Observed in The Mechanical Properties of Kevlar KM2-600 Due to Abrasions.

Research Aim: This research will focus on observing the changes in the mechanical properties of Kevlar KM2-600 in comparison to two different types of S glass tows (AGY S2 and Owens Corning Shield Strand S). Surface damage, along with fibre breakage, will be noted in all three fibres. The effects of the abrasions on all three fibres will be emphasised. The use of Kevlar KM2 and the other S glass tows will also be discussed, along with other potential applications.

Order a Proposal

Worried about your dissertation proposal? Not sure where to start?

  • Choose any deadline
  • Plagiarism free
  • Unlimited free amendments
  • Free anti-plagiarism report
  • Completed to match exact requirements

Order a Proposal

Industrial Application of Mechanical Engineering Dissertation Topics

Topic 1: the function of a fuel injector device..

Research Aim: This research focuses on the function of a fuel injector device and why this component is necessary for the system of an internal combustion engine. The importance of this device will be explained. The adverse effects on the entire system if the equipment is either faulty or completely removed will also be discussed.

Topic 2: To Solve Optimization Problems in a Mechanical Design by The Principles of Uncertainty.

Research Aim: This research will aim to formulate an optimization in a mechanical design under the influence of uncertainty. This will create an efficient tool that is based on the conditions of each optimisation under the risk. This will save time and allow the designer to obtain new information in regard to the stability of the performance of his design under uncertainties.

Topic 3: Analysing The Applications of Recycled Polycarbonate Particle Materials and Their Mechanical Properties.

Research Aim: This research will evaluate the mechanical properties of different polycarbonate materials and their potential to be recycled. The materials that can be recycled are then further examined for potential use as 3-dimensional printing materials. The temperature of the printer’s nozzle, along with the nozzle velocity matrix from previous experiments, is used to evaluate the tensile strength of the printed material. Other potential uses of these materials are also discussed.

Topic 4: The Process of Locating a Lightning Strike on a Wind Turbine.

Research Aim: This research will provide a detailed explanation of the process of detecting a lightning strike on a wind turbine. The measurement of the magnitude of the lightning strike, along with recognising the affected area will be explained. The proper method employed to rectify the damage that occurred by the strike will also be discussed.

Topic 5: Importance of a Heat Recovery Component in an Internal Combustion Engine for an Exhaust Gas System.

Research Aim: The research will take an in-depth evaluation of the different mechanics of a heat recovery component in an exhaust gas system. The functions of the different parts of the heat recovery component will be explained along with the importance of the entire element itself. The adverse effect of a faulty defective heat recovery component will also be explained.

“Feel free to contact us if you require custom dissertation topics and titles for your dissertation. ResearchProspect Ltd is a UK registered academic writing company which can provide you with highly qualified writers to assist you in the process of the formation of your dissertation. For more information about the type of services we offer.“

Related: Civil Engineering Dissertation

Important Notes:

As a student of mechanical engineering looking to get good grades, it is essential to develop new ideas and experiment on existing mechanical engineering theories – i.e., to add value and interest to the topic of your research.

The field of mechanical engineering is vast and interrelated to so many other academic disciplines like  civil engineering ,  construction ,  law , and even  healthcare . That is why it is imperative to create a mechanical engineering dissertation topic that is particular, sound and actually solves a practical problem that may be rampant in the field.

We can’t stress how important it is to develop a logical research topic; it is the basis of your entire research. There are several significant downfalls to getting your topic wrong: your supervisor may not be interested in working on it, the topic has no academic creditability, the research may not make logical sense, and there is a possibility that the study is not viable.

This impacts your time and efforts in  writing your dissertation as you may end up in a cycle of rejection at the very initial stage of the dissertation. That is why we recommend reviewing existing research to develop a topic, taking advice from your supervisor, and even asking for help in this particular stage of your dissertation.

Keeping our advice in mind while developing a research topic will allow you to pick one of the best mechanical engineering dissertation topics that not only fulfill your requirement of writing a research paper but also add to the body of knowledge.

Therefore, it is recommended that when finalizing your dissertation topic, you read recently published literature in order to identify gaps in the research that you may help fill.

Remember- dissertation topics need to be unique, solve an identified problem, be logical, and can also be practically implemented. Take a look at some of our sample mechanical engineering dissertation topics to get an idea for your own dissertation.

How to Structure Your Mechanical Engineering Dissertation

A well-structured   dissertation can help students   to achieve a high overall academic grade.

  • A Title Page
  • Acknowledgments
  • Declaration
  • Abstract: A summary of the research completed
  • Table of Contents
  • Introduction : This chapter includes the project rationale, research background, key research aims and objectives, and the research problems to be addressed. An outline of the structure of a dissertation can also be added to this chapter.
  • Literature Review :  This chapter presents relevant theories and frameworks by analysing published and unpublished literature available on the chosen research topic in light of research questions to be addressed. The purpose is to highlight and discuss the relative weaknesses and strengths of the selected research area whilst identifying any research gaps. Break down of the topic and key terms can have a positive impact on your dissertation and your tutor.
  • Methodology: The  data collection  and  analysis methods and techniques employed by the researcher are presented in the Methodology chapter, which usually includes  research design, research philosophy, research limitations, code of conduct, ethical consideration, data collection methods, and  data analysis strategy .
  • Findings and Analysis: The findings of the research are analysed in detail under the Findings and Analysis chapter. All key findings/results are outlined in this chapter without interpreting the data or drawing any conclusions. It can be useful to include  graphs , charts, and   tables in this chapter to identify meaningful trends and relationships.
  • Discussion and  Conclusion: The researcher presents his interpretation of results in this chapter and states whether the research hypothesis has been verified or not. An essential aspect of this section of the paper is to draw a linkage between the results and evidence from the literature. Recommendations with regard to the implications of the findings and directions for the future may also be provided. Finally, a summary of the overall research, along with final judgments, opinions, and comments, must be included in the form of suggestions for improvement.
  • References:  This should be completed in accordance with your University’s requirements
  • Bibliography
  • Appendices: Any additional information, diagrams, graphs that were used to  complete the  dissertation  but not part of the dissertation should be included in the Appendices chapter. Essentially, the purpose is to expand the information/data.

About ResearchProspect Ltd

ResearchProspect is a  UK-based academic writing service that provides help with  Dissertation Proposal  Writing,  PhD proposal writing ,  Dissertation Writing ,  Dissertation Editing, and Improvement .

Our team of writers is highly qualified. They are experts in their respective fields. They have been working in the industry for a long, thus are aware of the issues as well as the trends of the industry they are working in.

Need more Topics.?

Free Dissertation Topic

Phone Number

Academic Level Select Academic Level Undergraduate Graduate PHD

Academic Subject

Area of Research

Review Our Best Dissertation Topics 2021 complete list.

Frequently Asked Questions

How to find dissertation topics about mechanical engineering.

To discover mechanical engineering dissertation topics:

  • Research recent advancements.
  • Explore industry challenges.
  • Consider sustainability or automation.
  • Review academic journals.
  • Consult with professors.
  • Opt for a niche aligning with your passion and career aims.

You May Also Like

Need interesting and manageable science dissertation topics or thesis? Here are the trending science dissertation titles so you can choose the most suitable one.

Need interesting and manageable Architecture dissertation topics? Here are the trending Architecture dissertation titles so you can choose the most suitable one.

Family law dissertation topics are included in a section of UK law. This topic is more of a minor category in terms of your broader research. Family law dissertations are challenging.

USEFUL LINKS

LEARNING RESOURCES

researchprospect-reviews-trust-site

COMPANY DETAILS

Research-Prospect-Writing-Service

  • How It Works

ScholarWorks@UMass Amherst

Home > Engineering > MIE > ME_THESES

Mechanical and Industrial Engineering

Mechanical Engineering Masters Theses Collection

Theses from 2024 2024.

TECHNICAL EVALUATION OF FLOATING OFFSHORE WIND PLANTS AND INSTALLATION OPERATIONS , CENGIZHAN CENGIZ, Mechanical Engineering

Heat Transfer Enhacement of Latent Heat Thermal Enery Storage , Joe Hatem T. Saba, Mechanical Engineering

Theses from 2023 2023

Device Design for Inducing Aneurysm-Susceptible Flow Conditions Onto Endothelial Cells , hans f. foelsche, Mechanical Engineering

Thermal Conductivity and Mechanical Properties of Interlayer-Bonded Graphene Bilayers , Afnan Mostafa, Mechanical Engineering

Wind-Wave Misalignment Effects on Multiline Anchor Systems for Floating Offshore Wind Turbines , Doron T. Rose, Mechanical Engineering

Theses from 2022 2022

A Simplified Fluid Dynamics Model of Ultrafiltration , Christopher Cardimino, Mechanical Engineering

Local Nanomechanical Variations of Cold-sprayed Tantalum Coatings , Dhrubajyoti Chowdhury, Mechanical Engineering

Aerodynamically Augmented Air-Hockey Pucks , Madhukar Prasad, Mechanical Engineering

Analysis of Low-Induction Rotors for Increased Power Production , Jack E. Rees, Mechanical Engineering

Application of the New IEC International Design Standard for Offshore Wind Turbines to a Reference Site in the Massachusetts Offshore Wind Energy Area , Samuel C. Roach, Mechanical Engineering

Applications of Thermal Energy Storage with Electrified Heating and Cooling , Erich Ryan, Mechanical Engineering

Theses from 2021 2021

Design and Testing of a Foundation Raised Oscillating Surge Wave Energy Converter , Jacob R. Davis, Mechanical Engineering

Wind Turbine Power Production Estimation for Better Financial Agreements , Shanon Fan, Mechanical Engineering

Finite Element Analysis of Impact and Cohesion of Cold Sprayed Particles onto Non-Planar Surfaces , Zhongkui Liu, Mechanical Engineering

Mechanical Design and Analysis: High-Precision Microcontact Printhead for Roll-to-Roll Printing of Flexible Electronics , Mehdi Riza, Mechanical Engineering

Jet Breakup Dynamics of Inkjet Printing Fluids , Kashyap Sundara Rajan, Mechanical Engineering

Ground Source Heat Pumps: Considerations for Large Facilities in Massachusetts , Eric Wagner, Mechanical Engineering

Theses from 2020 2020

Modeling of Electrical Grid Systems to Evaluate Sustainable Electricity Generation in Pakistan , Muhammad Mustafa Amjad, Mechanical Engineering

A Study on Latent Thermal Energy Storage (LTES) using Phase Change Materials (PCMs) 2020 , Ritvij Dixit, Mechanical Engineering

SunDown: Model-driven Per-Panel Solar Anomaly Detection for Residential Arrays , Menghong Feng, Mechanical Engineering

Nozzle Clogging Prevention and Analysis in Cold Spray , Alden Foelsche, Mechanical Engineering

Short Term Energy Forecasting for a Microgird Load using LSTM RNN , Akhil Soman, Mechanical Engineering

Optimization of Thermal Energy Storage Sizing Using Thermodynamic Analysis , Andrew Villanueva, Mechanical Engineering

Fabrication of Binder-Free Electrodes Based on Graphene Oxide with CNT for Decrease of Resistance , Di Zhang, Mechanical Engineering

Theses from 2019 2019

Computational Fluid Dynamics Models of Electromagnetic Levitation Experiments in Reduced Gravity , Gwendolyn Bracker, Mechanical Engineering

Forecasting the Cost of Electricity Generated by Offshore Wind Turbines , Timothy Costa, Mechanical Engineering

Optical-Fiber-Based Laser-Induced Cavitation for Dynamic Mechanical Characterization of Soft Materials , Qian Feng, Mechanical Engineering

On the Fuel Spray Applications of Multi-Phase Eulerian CFD Techniques , Gabriel Lev Jacobsohn, Mechanical Engineering

Topology Network Optimization of Facility Planning and Design Problems , Ravi Ratan Raj Monga, Mechanical Engineering

The Promise of VR Headsets: Validation of a Virtual Reality Headset-Based Driving Simulator for Measuring Drivers’ Hazard Anticipation Performance , Ganesh Pai Mangalore, Mechanical Engineering

Ammonia Production from a Non-Grid Connected Floating Offshore Wind-Farm: A System-Level Techno-Economic Review , Vismay V. Parmar, Mechanical Engineering

Calculation of Scalar Isosurface Area and Applications , Kedar Prashant Shete, Mechanical Engineering

Theses from 2018 2018

Electroplating of Copper on Tungsten Powder , Richard Berdos, Mechanical Engineering

A NUMERICAL FLUTTER PREDICTOR FOR 3D AIRFOILS USING THE ONERA DYNAMIC STALL MODEL , Pieter Boersma, Mechanical Engineering

Streamwise Flow-Induced Oscillations of Bluff Bodies - The Influence of Symmetry Breaking , Tyler Gurian, Mechanical Engineering

Thermal Radiation Measurement and Development of Tunable Plasmonic Thermal Emitter Using Strain-induced Buckling in Metallic Layers , Amir Kazemi-Moridani, Mechanical Engineering

Restructuring Controllers to Accommodate Plant Nonlinearities , Kushal Sahare, Mechanical Engineering

Application and Evaluation of Lighthouse Technology for Precision Motion Capture , Soumitra Sitole, Mechanical Engineering

High Strain Rate Dynamic Response of Aluminum 6061 Micro Particles at Elevated Temperatures and Varying Oxide Thicknesses of Substrate Surface , Carmine Taglienti, Mechanical Engineering

The Effects of Mechanical Loading and Tumor Factors on Osteocyte Dendrite Formation , Wenbo Wang, Mechanical Engineering

Microenvironment Regulates Fusion of Breast Cancer Cells , Peiran Zhu, Mechanical Engineering

Design for Sustainability through a Life Cycle Assessment Conceptual Framework Integrated within Product Lifecycle Management , Renpeng Zou, Mechanical Engineering

Theses from 2017 2017

Improving the Efficiency of Wind Farm Turbines using External Airfoils , Shujaut Bader, Mechanical Engineering

Evaluation Of Impedance Control On A Powered Hip Exoskeleton , Punith condoor, Mechanical Engineering

Experimental Study on Viscoelastic Fluid-Structure Interactions , Anita Anup Dey, Mechanical Engineering

BMI, Tumor Lesion and Probability of Femur Fracture: a Probabilistic Biomechanics Approach , Zhi Gao, Mechanical Engineering

A Magnetic Resonance Compatible Knee Extension Ergometer , Youssef Jaber, Mechanical Engineering

Non-Equispaced Fast Fourier Transforms in Turbulence Simulation , Aditya M. Kulkarni, Mechanical Engineering

INCORPORATING SEASONAL WIND RESOURCE AND ELECTRICITY PRICE DATA INTO WIND FARM MICROSITING , Timothy A. Pfeiffer, Mechanical Engineering

Effects of Malformed or Absent Valves to Lymphatic Fluid Transport and Lymphedema in Vivo in Mice , Akshay S. Pujari, Mechanical Engineering

Electroless Deposition & Electroplating of Nickel on Chromium-Nickel Carbide Powder , Jeffrey Rigali, Mechanical Engineering

Numerical Simulation of Multi-Phase Core-Shell Molten Metal Drop Oscillations , Kaushal Sumaria, Mechanical Engineering

Theses from 2016 2016

Cold Gas Dynamic Spray – Characterization of Polymeric Deposition , Trenton Bush, Mechanical Engineering

Intent Recognition Of Rotation Versus Translation Movements In Human-Robot Collaborative Manipulation Tasks , Vinh Q. Nguyen, Mechanical Engineering

A Soft Multiple-Degree of Freedom Load Cell Based on The Hall Effect , Qiandong Nie, Mechanical Engineering

A Haptic Surface Robot Interface for Large-Format Touchscreen Displays , Mark Price, Mechanical Engineering

Numerical Simulation of High Velocity Impact of a Single Polymer Particle during Cold Spray Deposition , Sagar P. Shah, Mechanical Engineering

Tunable Plasmonic Thermal Emitter Using Metal-Coated Elastomeric Structures , Robert Zando, Mechanical Engineering

Theses from 2015 2015

Thermodynamic Analysis of the Application of Thermal Energy Storage to a Combined Heat and Power Plant , Benjamin McDaniel, Mechanical Engineering

Towards a Semantic Knowledge Management Framework for Laminated Composites , Vivek Premkumar, Mechanical Engineering

A CONTINOUS ROTARY ACTUATION MECHANISM FOR A POWERED HIP EXOSKELETON , Matthew C. Ryder, Mechanical Engineering

Optimal Topological Arrangement of Queues in Closed Finite Queueing Networks , Lening Wang, Mechanical Engineering

Creating a New Model to Predict Cooling Tower Performance and Determining Energy Saving Opportunities through Economizer Operation , Pranav Yedatore Venkatesh, Mechanical Engineering

Theses from 2014 2014

New Generator Control Algorithms for Smart-Bladed Wind Turbines to Improve Power Capture in Below Rated Conditions , Bryce B. Aquino, Mechanical Engineering

UBOT-7: THE DESIGN OF A COMPLIANT DEXTEROUS MOBILE MANIPULATOR , Jonathan Cummings, Mechanical Engineering

Design and Control of a Two-Wheeled Robotic Walker , Airton R. da Silva Jr., Mechanical Engineering

Free Wake Potential Flow Vortex Wind Turbine Modeling: Advances in Parallel Processing and Integration of Ground Effects , Nathaniel B. Develder, Mechanical Engineering

Buckling of Particle-Laden Interfaces , Theo Dias Kassuga, Mechanical Engineering

Modeling Dynamic Stall for a Free Vortex Wake Model of a Floating Offshore Wind Turbine , Evan M. Gaertner, Mechanical Engineering

An Experimental Study of the C-Start of a Mechanical Fish , Benjamin Kandaswamy Chinna Thambi, Mechanical Engineering

Measurement and Verification - Retro-Commissioning of a LEED Gold Rated Building Through Means of an Energy Model: Are Aggressive Energy Simulation Models Reliable? , Justin M. Marmaras, Mechanical Engineering

Development of a Support Structure for Multi-Rotor Wind Turbines , Gaurav Murlidhar Mate, Mechanical Engineering

Towards Accessible, Usable Knowledge Frameworks in Engineering , Jeffrey Mcpherson, Mechanical Engineering

A Consistent Algorithm for Implementing the Space Conservation Law , Venkata Pavan Pillalamarri Narasimha Rao, Mechanical Engineering

Kinetics of Aluminization and Homogenization in Wrought H-X750 Nickel-Base Superalloy , Sean Reilly, Mechanical Engineering

Single-Phase Turbulent Enthalpy Transport , Bradley J. Shields, Mechanical Engineering

CFD Simulation of the Flow around NREL Phase VI Wind Turbine , Yang Song, Mechanical Engineering

Selection of Outputs for Distributed Parameter Systems by Identifiability Analysis in the Time-scale Domain , Teergele, Mechanical Engineering

The Optimization of Offshore Wind Turbine Towers Using Passive Tuned Mass Dampers , Onur Can Yilmaz, Mechanical Engineering

Design of a Passive Exoskeleton Spine , Haohan Zhang, Mechanical Engineering

TURBULENT TRANSITION IN ELECTROMAGNETICALLY LEVITATED LIQUID METAL DROPLETS , Jie Zhao, Mechanical Engineering

Theses from 2013 2013

Optimization of Mixing in a Simulated Biomass Bed Reactor with a Center Feeding Tube , Michael T. Blatnik, Mechanical Engineering

Continued Development of a Chilled Water System Analysis Tool for Energy Conservation Measures Evaluation , Ghanshyam Gaudani, Mechanical Engineering

Application of Finite Element Method in Protein Normal Mode Analysis , Chiung-fang Hsu, Mechanical Engineering

Asymmetric Blade Spar for Passive Aerodynamic Load Control , Charles Mcclelland, Mechanical Engineering

Background and Available Potential Energy in Numerical Simulations of a Boussinesq Fluid , Shreyas S. Panse, Mechanical Engineering

Techno-Economic Analysis of Hydrogen Fuel Cell Systems Used as an Electricity Storage Technology in a Wind Farm with Large Amounts of Intermittent Energy , Yash Sanghai, Mechanical Engineering

Multi Rotor Wind Turbine Design And Cost Scaling , Preeti Verma, Mechanical Engineering

Activity Intent Recognition of the Torso Based on Surface Electromyography and Inertial Measurement Units , Zhe Zhang, Mechanical Engineering

Theses from 2012 2012

Simulations of Non-Contact Creep in Regimes of Mixed Dominance , Maija Benitz, Mechanical Engineering

Techniques for Industrial Implementation of Emerging Semantic Technologies , Jay T. Breindel, Mechanical Engineering

Environmental Impacts Due to Fixed and Floating Offshore Wind Turbines , Micah K. Brewer, Mechanical Engineering

Physical Model of the Feeding Strike of the Mantis Shrimp , Suzanne M. Cox, Mechanical Engineering

Investigating the Relationship Between Material Property Axes and Strain Orientations in Cebus Apella Crania , Christine M. Dzialo, Mechanical Engineering

A Multi-Level Hierarchical Finite Element Model for Capillary Failure in Soft Tissue , Lu Huang, Mechanical Engineering

Finite Element Analysis of a Femur to Deconstruct the Design Paradox of Bone Curvature , Sameer Jade, Mechanical Engineering

Vortex-Induced Vibrations of an Inclined Cylinder in Flow , Anil B. Jain, Mechanical Engineering

Experimental Study of Stability Limits for Slender Wind Turbine Blades , Shruti Ladge, Mechanical Engineering

Semi-Active Damping for an Intelligent Adaptive Ankle Prosthesis , Andrew K. Lapre, Mechanical Engineering

A Finite Volume Approach For Cure Kinetics Simulation , Wei Ma, Mechanical Engineering

Advanced Search

  • Notify me via email or RSS
  • Collections
  • Disciplines

Author Corner

  • Login for Faculty Authors
  • Faculty Author Gallery
  • Expert Gallery
  • University Libraries
  • Mechanical and Industrial Engineering Webpage
  • UMass Amherst

This page is sponsored by the University Libraries.

© 2009 University of Massachusetts Amherst • Site Policies

Privacy Copyright

Digital Commons @ University of South Florida

  • USF Research
  • USF Libraries

Digital Commons @ USF > College of Engineering > Mechanical Engineering > Theses and Dissertations

Mechanical Engineering Theses and Dissertations

Theses/dissertations from 2023 2023.

Metachronal Locomotion: Swimming, Scaling, and Schooling , Kuvvat Garayev

A Human-in-the-Loop Robot Grasping System with Grasp Quality Refinement , Tian Tan

Theses/Dissertations from 2022 2022

Health Effects of Oil Spills and Dispersal of Oil Droplets and Zooplankton by Langmuir Cells , Sanjib Gurung

Estimating the As-Placed Grout Volume of Auger Cast Piles , Tristen Mee

Hybrid RANS-LES Hemolytic Power Law Modeling of the FDA Blood Pump , Joseph Tarriela

Theses/Dissertations from 2021 2021

Dynamic Loading Directed Neural Stem Cell Differentiation , Abdullah Revaha Akdemir

An Investigation of Cross-links on Crystallization and Degradation in a Novel, PhotoCross-linkable Poly (Lactic Acid) System , Nicholas Baksh

A Framework to Aid Decision Making for Smart Manufacturing Technologies in Small-and Medium-Sized Enterprises , Purvee Bhatia

Formation of Gas Jets and Vortex Rings from Bursting Bubbles: Visualization, Kinematics, and Fluid Dynamics , Ali A. Dasouqi

Development of Carbon and Silicon Carbide Based Microelectrode Implantable Neural Interfaces , Chenyin Feng

Sulfate Optimization in the Cement-Slag Blended System Based on Calorimetry and Strength Studies , Mustafa Fincan

Interrelation of Thermal Stimulation with Haptic Perception, Emotion, and Memory , Mehdi Hojatmadani

Modeling the Ambient Conditions of a Manufacturing Environment Using Computational Fluid Dynamics (CFD) , Yang Liu

Flow Visualization and Aerosol Characterization of Respiratory Jets Exhaled from a Mannequin Simulator , Sindhu Reddy Mutra

A Constitutive-Based Deep Learning Model for the Identification of Active Contraction Parameters of the Left Ventricular Myocardium , Igor Augusto Paschoalotte Nobrega

Sensible/Latent Hybrid Thermal Energy Storage for the Supercritical Carbon Dioxide Brayton Cycle , Kelly Osterman

Evaluating the Performance of Devices Engineering to Quantify the FARS Test , Harsh Patel

Event-Triggered Control Architectures for Scheduling Information Exchange in Uncertain and Multiagent Systems , Stefan Ristevski

Theses/Dissertations from 2020 2020

Experimental Investigation of Liquid Height Estimation and Simulation Verification of Bolt Tension Quantification Using Surface Acoustic Waves , Hani Alhazmi

Investigation of Navigation Systems for Size, Cost, and Mass Constrained Satellites , Omar Awad

Simulation and Verification of Phase Change Materials for Thermal Energy Storage , Marwan Mosubah Belaed

Control of a Human Arm Robotic Unit Using Augmented Reality and Optimized Kinematics , Carlo Canezo

Manipulation and Patterning of Mammalian Cells Using Vibrations and Acoustic Forces , Joel Cooper

Stable Adaptive Control Systems in the Presence of Unmodeled and Actuator Dynamics , Kadriye Merve Dogan

The Design and Development of a Wrist-Hand Orthosis , Amber Gatto

ROBOAT - Rescue Operations Bot Operating in All Terrains , Akshay Gulhane

Mitigation of Electromigration in Metal Interconnects Passivated by Ångstrom-Thin 2D Materials , Yunjo Jeong

Swimming of Pelagic Snails: Kinematics and Fluid Dynamics , Ferhat Karakas

Functional Gait Asymmetries Achieved Through Modeling and Understanding the Interaction of Multiple Gait Modulations , Fatemeh Rasouli

Distributed Control of Multiagent Systems under Heterogeneity , Selahattin Burak Sarsilmaz

Design and Implementation of Intuitive Human-robot Teleoperation Interfaces , Lei Wu

Laser Micropatterning Effects on Corrosion Resistance of Pure Magnesium Surfaces , Yahya Efe Yayoglu

Theses/Dissertations from 2019 2019

Synthesis and Characterization of Molybdenum Disulfide/Conducting Polymer Nanocomposite Materials for Supercapacitor Applications , Turki S. Alamro

Design of Shape-Morphing Structures Consisting of Bistable Compliant Mechanisms , Rami Alfattani

Low Temperature Multi Effects Desalination-Mechanical Vapor Compression Powered by Supercritical Organic Rankine Cycle , Eydhah Almatrafi

Experimental Results of a Model Reference Adaptive Control Approach on an Interconnected Uncertain Dynamical System , Kemberly Cespedes

Modeling of Buildings with Electrochromic Windows and Thermochromic Roofs , Hua-Ting Kao

Design and Testing of Experimental Langmuir Turbulence Facilities , Zongze Li

Solar Thermal Geothermal Hybrid System With a Bottoming Supercritical Organic Rankine Cycle , Francesca Moloney

Design and Testing of a Reciprocating Wind Harvester , Ahmet Topcuoglu

Distributed Spatiotemporal Control and Dynamic Information Fusion for Multiagent Systems , Dzung Minh Duc Tran

Controlled Wetting Using Ultrasonic Vibration , Matthew A. Trapuzzano

On Distributed Control of Multiagent Systems under Adverse Conditions , Emre Yildirim

Theses/Dissertations from 2018 2018

Synthesis and Characterization of Alpha-Hematite Nanomaterials for Water-Splitting Applications , Hussein Alrobei

Control of Uncertain Dynamical Systems with Spatial and Temporal Constraints , Ehsan Arabi

Simulation and Optimization of a Sheathless Size-Based Acoustic Particle Separator , Shivaraman Asoda

Simulation of Radiation Flux from Thermal Fluid in Origami Tubes , Robert R. Bebeau

Toward Verifiable Adaptive Control Systems: High-Performance and Robust Architectures , Benjamin Charles Gruenwald

Developing Motion Platform Dynamics for Studying Biomechanical Responses During Exercise for Human Spaceflight Applications , Kaitlin Lostroscio

Design and Testing of a Linear Compliant Mechanism with Adjustable Force Output , William Niemeier

Investigation of Thermal History in Large Area Projection Sintering, an Additive Manufacturing Technology , Justin Nussbaum

Acoustic Source Localization with a VTOL sUAV Deployable Module , Kory Olney

Defect Detection in Additive Manufacturing Utilizing Long Pulse Thermography , James Pierce

Design and Testing of a Passive Prosthetic Ankle Foot Optimized to Mimic an Able-Bodied Gait , Millicent Schlafly

Simulation of Turbulent Air Jet Impingement for Commercial Cooking Applications , Shantanu S. Shevade

Materials and Methods to Fabricate Porous Structures Using Additive Manufacturing Techniques , Mohsen Ziaee

Theses/Dissertations from 2017 2017

Large Area Sintering Test Platform Design and Preliminary Study on Cross Sectional Resolution , Christopher J. Gardiner

Enhanced Visible Light Photocatalytic Remediation of Organics in Water Using Zinc Oxide and Titanium Oxide Nanostructures , Srikanth Gunti

Heat Flux Modeling of Asymmetrically Heated and Cooled Thermal Stimuli , Matthew Hardy

Simulation of Hemiparetic Function Using a Knee Orthosis with Variable Impedance and a Proprioception Interference Apparatus , Christina-Anne Kathleen Lahiff

Synthesis, Characterization, and Application of Molybdenum Oxide Nanomaterials , Michael S. McCrory

Effects of Microstructure and Alloy Concentration on the Corrosion and Tribocorrosion Resistance of Al-Mn and WE43 Mg Alloys , Hesham Y. Saleh Mraied

Novel Transducer Calibration and Simulation Verification of Polydimethylsiloxane (PDMS) Channels on Acoustic Microfluidic Devices , Scott T. Padilla

Force Compensation and Recreation Accuracy in Humans , Benjamin Rigsby

Experimental Evaluation of Cooling Effectiveness and Water Conservation in a Poultry House Using Flow Blurring ® Atomizers , Rafael M. Rodriguez

Media Velocity Considerations in Pleated Air Filtration , Frederik Carl Schousboe

Orthoplanar Spring Based Compliant Force/Torque Sensor for Robot Force Control , Jerry West

Experimental Study of High-Temperature Range Latent Heat Thermal Energy Storage , Chatura Wickramaratne

Theses/Dissertations from 2016 2016

Al/Ti Nanostructured Multilayers: from Mechanical, Tribological, to Corrosion Properties , Sina Izadi

Molybdenum Disulfide-Conducting Polymer Composite Structures for Electrochemical Biosensor Applications , Hongxiang Jia

Waterproofing Shape-Changing Mechanisms Using Origami Engineering; Also a Mechanical Property Evaluation Approach for Rapid Prototyping , Andrew Jason Katz

Hydrogen Effects on X80 Steel Mechanical Properties Measured by Tensile and Impact Testing , Xuan Li

Application and Analysis of Asymmetrical Hot and Cold Stimuli , Ahmad Manasrah

Droplet-based Mechanical Actuator Utilizing Electrowetting Effect , Qi Ni

Experimental and Computational Study on Fracture Mechanics of Multilayered Structures , Hai Thanh Tran

Designing the Haptic Interface for Morse Code , Michael Walker

Optimization and Characterization of Integrated Microfluidic Surface Acoustic Wave Sensors and Transducers , Tao Wang

Corrosion Characteristics of Magnesium under Varying Surface Roughness Conditions , Yahya Efe Yayoglu

Theses/Dissertations from 2015 2015

Carbon Dioxide (CO 2 ) Emissions, Human Energy, and Cultural Perceptions Associated with Traditional and Improved Methods of Shea Butter Processing in Ghana, West Africa , Emily Adams

Experimental Investigation of Encapsulated Phase Change Materials for Thermal Energy Storage , Tanvir E. Alam

Design Of Shape Morphing Structures Using Bistable Elements , Ahmad Alqasimi

Heat Transfer Analysis of Slot Jet Impingement onto Roughened Surfaces , Rashid Ali Alshatti

Systems Approach to Producing Electrospun Polyvinylidene Difluoride Fiber Webs with Controlled Fiber Structure and Functionality , Brian D. Bell

Self-Assembly Kinetics of Microscale Components: A Parametric Evaluation , Jose Miguel Carballo

Measuring Polydimethylsiloxane (PDMS) Mechanical Properties Using Flat Punch Nanoindentation Focusing on Obtaining Full Contact , Federico De Paoli

A Numerical and Experimental Investigation of Flow Induced Noise In Hydraulic Counterbalance Valves , Mutasim Mohamed Elsheikh

An Experimental Study on Passive Dynamic Walking , Philip Andrew Hatzitheodorou

Use of Anaerobic Adhesive for Prevailing Torque Locking Feature on Threaded Product , Alan Hernandez

Viability of Bismuth as a Green Substitute for Lead in Jacketed .357 Magnum Revolver Bullets , Joel A. Jenkins

A Planar Pseudo-Rigid-Body Model for Cantilevers Experiencing Combined Endpoint Forces and Uniformly Distributed Loads Acting in Parallel , Philip James Logan

Kinematic Control of Redundant Mobile Manipulators , Mustafa Mashali

Passive Symmetry in Dynamic Systems and Walking , Haris Muratagic

Mechanical Properties of Laser-Sintered-Nylon Diamond Lattices , Clayton Neff

Design, Fabrication and Analysis of a Paver Machine Push Bar Mechanism , Mahendra Palnati

Synthesis, Characterization, and Electrochemical Properties of Polyaniline Thin Films , Soukaina Rami

A Technical and Economic Comparative Analysis of Sensible and Latent Heat Packed Bed Storage Systems for Concentrating Solar Thermal Power Plants , Jamie Trahan

Use of FDM Components for Ion Beam and Vacuum Applications , Eric Miguel Tridas

The Development of an Adaptive Driving Simulator , Sarah Marie Tudor

Dual 7-Degree-of-Freedom Robotic Arm Remote Teleoperation Using Haptic Devices , Yu-Cheng Wang

Ductility and Use of Titanium Alloy and Stainless Steel Aerospace Fasteners , Jarrod Talbott Whittaker

Advanced Search

  • Email Notifications and RSS
  • All Collections
  • USF Faculty Publications
  • Open Access Journals
  • Conferences and Events
  • Theses and Dissertations
  • Textbooks Collection

Useful Links

  • Rights Information
  • SelectedWorks
  • Submit Research

Home | About | Help | My Account | Accessibility Statement | Language and Diversity Statements

Privacy Copyright

Home Page

  •   Create Account
  •   Login
  •   Home

Browsing/Searching: UR Research > Mechanical Engineering Department  >  Mechanical Engineering Ph.D. Theses

  • Browse Publications
  • Browse Authors/Contributors
  • Browse Sponsors

Viewing: 1 - 25 of 62

mechanical technology thesis title

  • Help  | 
  • Contact Us  | 
  • About  | 
  • Privacy Policy

ODU Digital Commons

Home > Engineering & Technology > MAE > ETDs

Mechanical & Aerospace Engineering Theses & Dissertations

Theses and dissertations published by graduate students in the Department of Mechanical and Aerospace Engineering, College of Engineering, Old Dominion University since Fall 2016 are available in this collection. Backfiles of all dissertations (and some theses) have also been added.

In late Fall 2023 or Spring 2024, all theses will be digitized and available here. In the meantime, consult the Library Catalog to find older items in print.

Theses/Dissertations from 2023 2023

Thesis: Switching Methods for Three-Dimensional Rotational Dynamics Using Modified Rodrigues Parameters , Matthew Jarrett Banks

Dissertation: Studies of Flowfields and Dynamic Stability Characteristics of a Quadrotor , Engin Baris

Thesis: Development, Experimental Validation, and Progressive Failure Modeling of an Ultra-Thin High Stiffness Deployable Composite Boom for in-Space Applications , Jimesh D. Bhagatji

Thesis: Design and Implementation of a Launching Method for Free to Oscillate Dynamic Stability Testing , Kristen M. Carey

Thesis: SeaLion CubeSat Mission Architecture Using Model Based Systems Engineering with a Docs as Code Approach , Kevin Yi-Tzu Chiu

Dissertation: RoboRetrieve --In a Dual Role as a Hand-held Surgical Robot and a Collaborative Robot End-effector to Perform Spillage-free Specimen Retrieval in Laparoscopy , Siqin Dong

Thesis: Fabrication of Solid Oxide Fuel Cell Components Using Stereolithography 3D Printing , Hannah Dyer

Thesis: Fusion Bonding Behavior of 3D Printed PA6/CF Composites Via Post Fabrication Compaction , Gonzalo Fernandez Mediavilla

Dissertation: Machine Learning Approach to Activity Categorization in Young Adults Using Biomechanical Metrics , Nathan Q. C. Holland

Thesis: Study of Microphonic Effects on the C100 Cryomodule for High Energy Electron Beam Accelerators , Caleb James Hull

Dissertation: E-Cadherin Force Transmission and Stiffness Sensing , Mazen Mezher

Thesis: Experimental and Computational Aerodynamic Studies of Axially-Oriented Low-Fineness-Ratio Cylinders , Forrest Miller

Thesis: The Effect of Through Thickness Reinforcement Angle on the Disbonding Behavior in Skin-Stringer Configuration , Christopher John Morris

Dissertation: Chemical and Physical Interaction Mechanisms and Multifunctional Properties of Plant Based Graphene in Carbon Fiber Epoxy Composites , Daniel W. Mulqueen

Thesis: Data-Driven Predictive Modeling to Enhance Search Efficiency of Glowworm-Inspired Robotic Swarms in Multiple Emission Source Localization Tasks , Payal Nandi

Dissertation: Fabrication of Smooth SAC305 Thin Films via Magnetron Sputtering and Evaluations of Microstructure, Creep, and Electrical Resistivity , Manish Ojha

Dissertation: Faster, Cheaper, and Better CFD: A Case for Machine Learning to Augment Reynolds-Averaged Navier-Stokes , John Peter Romano II

Thesis: A Comparative Study of Vinti-Based Orbit Propagation and Estimation for CubeSats in Very Low Earth Orbits , Ethan Michael Senecal

Theses/Dissertations from 2022 2022

Thesis: A Comparison of Uniaxial Compressive Response and Inelastic Deformation Mechanisms in Freeze Cast Alumina-Epoxy Composites Without and With Rigid Confinement , Tareq Aljuhari

Thesis: Failure Mode, Effects and Criticality Analysis of a Very Low Earth Orbit CubeSat Mission , Robb Christopher Borowicz

Thesis: A Study of Asymmetric Supersonic Wind Tunnel Nozzle Design , Brittany A. Davis

Thesis: Electromagnetic Modeling of a Wind Tunnel Magnetic Suspension and Balance System , Desiree Driver

Dissertation: Advanced Generalized Predictive Control and Its Application to Tiltrotor Aircraft for Stability Augmentation and Vibration Reduction , Thomas Glen Ivanco

Dissertation: Numerical Simulation of Electroosmotic Flow of Viscoelastic Fluid in Microchannel , Jianyu Ji

Thesis: Assembly of Ceramic Particles in Aqueous Suspensions Induced by High-Frequency AC Electric Field , James E. John IV

Dissertation: The Effect of Soft Tissue and Bone Morphology on the Stresses in the Foot and Ankle , Jinhyuk Kim

Thesis: Development of Modeling and Simulation Platform for Path-Planning and Control of Autonomous Underwater Vehicles in Three-Dimensional Spaces , Sai Krishna Abhiram Kondapalli

Thesis: Deep Learning Object-Based Detection of Manufacturing Defects in X-ray Inspection Imaging , Juan C. Parducci

Dissertation: Utilization of Finite Element Analysis Techniques for Adolescent Idiopathic Scoliosis Surgical Planning , Michael A. Polanco

Thesis: Mechanics of Preimpregnated Fiber Tow Deposition and Compaction , Virginia Meredith Rauch

Dissertation: Role of Structural Hierarchy in Multiscale Material Systems , Siavash Sattar

Thesis: Implementation of an Extended Kalman Filter Using Inertial Sensor Data for UAVs During GPS Denied Applications , Sky Seliquini

Dissertation: Collaborative Robotics Strategies for Handling Non-Repetitive Micro-Drilling Tasks Characterized by Low Structural Mechanical Impedance , Xiangyu Wang

Theses/Dissertations from 2021 2021

Dissertation: Tunable Compressive Mechanical Behavior of Ice-Templated Materials , Sashanka Akurati

Thesis: Analysis of a Non-Equilibrium Vortex Pair as Aircraft Trailing Vortices , Manuel Ayala

Thesis: Modeling Interactions in Concentrated Ceramic Suspensions Under AC Electric Field , Naga Bharath Gundrati

Dissertation: Improved Strain Gage Instrumentation Strategies for Rotorcraft Blade Measurements , Timothy S. Davis

Thesis: A Model-Based Systems Engineering Approach to e-VTOL Aircraft and Airspace Infrastructure Design for Urban Air Mobility , Heidi Selina Glaudel

Dissertation: Development and Applications of Adjoint-Based Aerodynamic and Aeroacoustic Multidisciplinary Optimization for Rotorcraft , Ramiz Omur Icke

Thesis: A New Method for Estimating the Physical Characteristics of Martian Dust Devils , Shelly Cahoon Mann

Thesis: Post-Processing and Characterization of Additive Manufactured Carbon Fiber Reinforced Semi-Crystalline Polymers , Patricia Revolinsky

Thesis: Gradient-Based Tradeoff Design for Engineering Applications , Lena Alexis Royster

Thesis: The Effect of Through Thickness Reinforcement on Debonding Behavior of Skin/Stringer Configuration , Yogaraja Sridhar

Thesis: Empirical Modeling of Tilt-Rotor Aerodynamic Performance , Michael C. Stratton

Thesis: A Digital One Degree of Freedom Model of an Electromagnetic Position Sensor , Michelle Elizabeth Weinmann

Theses/Dissertations from 2020 2020

Thesis: Parametric Study of Residual Stresses in Wire and Arc Additive Manufactured Parts , Hisham Khaled Jamil Abusalma

Thesis: The Effect of Compaction Temperature and Pressure on Mechanical Properties of 3D Printed Short Glass Fiber Composites , Pushpashree Jain Ajith Kumar Jain

Thesis: Numerical Analysis of a Roadway Piezoelectric Harvesting System , Abdul Rahman Badawi

Dissertation: Role of Anisometric Particles in Ice-Templated Porous Ceramic Structure and Mechanical Properties , Mahesh Banda

Thesis: Mechanism of Compaction With Wrinkle Formation During Automatic Stitching of Dry Fabrics and the Size Effect of Compression Molded Discontinuous Fiber-Reinforced Composites , Anibal Benjamin Beltran Laredo

Thesis: Conical Orbital Mechanics: A Rework of Classic Orbit Transfer Mechanics , Cian Anthony Branco

Thesis: Rotorcraft Blade Angle Calibration Methods , Brian David Calvert Jr.

Dissertation: Onboard Autonomous Controllability Assessment for Fixed Wing sUAVs , Brian Edward Duvall

Thesis: A Parametric Analysis of a Turbofan Engine with an Auxiliary Bypass Combustion Chamber – The TurboAux Engine , Kaleab Fetahi

Thesis: Space-Based Countermeasure for Hypersonic Glide Vehicle , Robert Joseph Fowler IV

Thesis: Compaction and Residual Stress Modeling in Composite Manufactured with Automated Fiber Placement , Von Clyde Jamora

Thesis: Trajectory Simulation With Battery Modeling for Electric Powered Unmanned Aerial Vehicles , Ege Konuk

Thesis: Detailed Modeling of the Flash Hydrolysis of Algae for Biofuel-Production in COMSOL Multiphysics , Noah Joseph LeGrand

Thesis: Through-Thickness Reinforcement and Repair of Carbon Fiber Based Honeycomb Structures Under Flexure and Tension of Adhesively Bonded Joints , Aleric Alden Sanders

Thesis: Energy Harvesting Using Flextensional Piezoelectric Energy Harvesters in Resonance and Off-Resonance Modes , Mohamed A. Shabara

Thesis: Thermal Contact Resistance Measurement and Related Uncertainties , Amanda Elizabeth Stark

Thesis: Model Based Systems Engineering for a Venture Class Launch Facility , Walter McGee Taraila

Thesis: A Post-Impact Behavior of Platelet-Based Composites Produced by Compression Molding , Christopher Eugene Ervin Volle

Thesis: Nonlinearity Index Aircraft Spin Motion Analysis With Dynamic Inversion Spin Recovery Controller Design , Jeffry Walker

Thesis: A Study of the Aeroacoustics of Swept Propellers for Small Unmanned Aerial Vehicles , Arthur David Wiedemann

Thesis: Finite Element Analysis Investigation of Hybrid Thin-Ply Composites for Improved Performance of Aerospace Structures , Alana M. Zahn

Theses/Dissertations from 2019 2019

Thesis: Characterization and Optimization of a Propeller Test Stand , Colin Bruce Leighton Benjamin

Dissertation: Endogenous Force Transmission Between Epithelial Cells and a Role for α-Catenin , Sandeep Dumbali

Dissertation: Effect of the Physical Micro-Environment on Cell Adhesion and Force Exertion , Mohamad Eftekharjoo

Thesis: Reducing the Noise Impact of Unmanned Aerial Vehicles by Flight Control System Augmentation , Matthew B. Galles

Thesis: Design and Manufacture of an Inertial Cascade Impactor for Industrial Hygiene Purposes , Hector Joel Gortaire

Thesis: Off Axis Compressive Response of Ice-Templated Ceramics , Rahul Kumar Jujjavarapu

Thesis: Unsupervised-Learning Assisted Artificial Neural Network for Optimization , Varun Kote

Dissertation: Numerical Simulation of Viscoelastic Flow in Micro/Nanochannels , Lanju Mei

Thesis: Comparison of Support Methods for Static Aerodynamic Testing and Validation of a Magnetic Suspension and Balance System , Cameron K. Neill

Thesis: Extension of a Penalty Method for Numerically Solving Constrained Multibody Dynamic Problems , Troy Newhart

Dissertation: Computational Analysis and Design Optimization of Convective PCR Devices , Jung Il Shu

Thesis: Periodic Orbit Analytic Construction In The Circular Restricted Three-Body Problem , Jay Shriram Suryawanshi

Thesis: A CFD Study of Steady Fully Developed Laminar Flow Through a 90-Degree Bend Pipe with a Square Cross-Sectional Area , Subodh Sushant Toraskar

Dissertation: Estimation of Arterial Wall Parameters Via Model-Based Analysis of Noninvasively Measured Arterial Pulse Signals , Dan Wang

Theses/Dissertations from 2018 2018

Thesis: Offshore Wind Energy: Simulating Local Offshore Wind Turbine , Ian P. Aquino

Dissertation: Epithelial Sheet Response to External Stimuli , Yashar Bashirzadeh

Thesis: Anthropomorphically Inspired Design of a Tendon-Driven Robotic Prosthesis for Hand Impairments , Manali Bapurao Bhadugale

Thesis: Aerothermodynamic Analysis of a Mars Sample Return Earth-Entry Vehicle , Daniel A. Boyd

Thesis: Volterra Series Approximation for Multi-Degree of Freedom, Multi-Input, Multi-Output, Aircraft Dynamics , Alexander J. Chen

Dissertation: Simplified, Alternative Formulation of Numerical Simulation of Proton Exchange Membrane Fuel Cell , Russell L. Edwards

Thesis: Distributed Sensing and System Identification of Cantilever Beams and Plates in the Presence of Weak Nonlinearities , Patrick Sean Heaney

Thesis: Dynamic Response Modeling of High Speed Planing Craft with Enforced Acceleration , Brian K. Johnson

Dissertation: Identification and Optimal Linear Tracking Control of ODU Autonomous Surface Vehicle , Nadeem Khan

Dissertation: Design and Implementation of an Artificial Neural Network Controller for Quadrotor Flight in Confined Environment , Ahmed Mekky

Thesis: Gust Alleviation System for General Aviation Aircraft , Lucas Coleman Mills

Thesis: Human-Robot Collaborative Force-Controlled Micro-Drilling for Advanced Manufacturing and Medical Applications , Parimal Mahesh Prajapati

Thesis: Single-Stage, Venturi-Driven Desalination System , Brandon Proetto

Thesis: A Cost Effective Design for a Propeller Thrust/Torque Balance , Nicholas Barrett Sadowski

Dissertation: Understanding the Mechanical Behavior of Costal Cartilage at Their Curved Exterior Surface Via a Tactile Sensor with a Built-In Probe for Distributed-Deflection Detection , Jiayue Shen

Thesis: A Scientific Approach to Understanding the Head Trauma Endured by a Mixed Martial Arts Fighter , John William Michael Sorbello

Thesis: Robocatch: Design and Making of a Hand-Held Spillage-Free Specimen Retrieval Robot for Laparoscopic Surgery , Farid Tavakkolmoghaddam

Thesis: Effects of Automated Fiber Placement on High Strain Rate Compressive Response of Advanced Composites , Alexander Trochez

Thesis: A Monolithic Internal Strain-Gage Balance Design Based on Design for Manufacturability , Thomas Ladson Webb III

Dissertation: A Stepwise Compression-Relaxation Testing Method for Tissue Characterization and Tumor Detection Via a Two-Dimensional Tactile Sensor , Yichao Yang

Advanced Search

  • Notify me via email or RSS
  • Collections
  • Disciplines
  • Author Guidelines
  • MAE Website
  • Other Digital Collections
  • ODU Libraries
  • Old Dominion University

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

George W. Woodruff School of Mechanical Engineering

Master's thesis process.

The Graduate Committee meets once a month to review and approve academic student matters; therefore, please plan accordingly. 

Process Initiation

Step 1. Identify an advisor, a thesis topic, and your thesis reading committee

  • You are encouraged to talk to various faculty members regarding possible thesis topics and to begin this process immediately upon embarking on a degree program. Composition of your reading committee should be decided in conjunction with your advisor.
  • The committee consists of at least three members . The advisor or one of the co-advisors must be a tenure-track (academic) Woodruff School faculty member, or a Woodruff School research faculty member with an earned doctorate. Two members of the M.S. Thesis Reading Committee must be tenure-track (academic faculty with primary or joint appointments in the Woodruff School). All committee members must have an earned doctorate or equivalent professional experience.

Step 2. Submit the Request for Approval of Master's Thesis Topic Form

  • Complete the Request for Approval of Master's Thesis Topic form in the ME Graduate Handbook. Please go to the following link and follow the online instructions:

         Request for Approval

  • Once the form is submitted, your faculty advisor will receive an automated email requesting a short justification for the composition of your reading committee. 

Please Note: If a proposed member is not a Georgia Tech faculty member, a CV of that proposed member must also accompany the request. Please email the CV to your Staff Academic Advisor in the Office of Student Services.

Step 3. Receive approval from the Woodruff School Graduate Committee and then obtain signatures of remaining committee members

  • After the Woodruff School Graduate Committee approves your master's thesis reading committee and your Request for Approval of Master's Thesis Topic, you will receive an email from the Office of Student Services.
  • Please log into eSignature.gatech.edu to create an account with DocuSign. Once logged into DocuSign, complete the Request for Approval of Master’s Thesis Topic electronic form.

Please be sure to list Dr. Andrei Fedorov as the School Chair and your Staff Academic Advisor as the Graduate Coordinator. An email will send automatically requesting the required signatures. Everyone will receive a final, signed copy of the form.

Change in Thesis Title or Abstract

If there are any changes in your Thesis Title or Abstract, please complete a revised Request for Approval of Master's Thesis Topic   form via DocuSign. Indicate on the form that this is only a change in title, abstract, or both. You and your advisor must sign the form. Changes to a master's thesis title or abstract are handled administratively and need not go to the Woodruff School Graduate Committee for approval.

Change in Thesis Reading Committee

If there are any changes to your Master's Thesis Reading Committee, it must be submitted to the Office of Student Services on a revised Request for Approval of Master's Thesis Topic form. Please follow the above instructions in steps 2 and 3 in order to have the new reading committee member(s) approved. If the person is not a Georgia Tech faculty member, please email the CV to your Staff Academic Advisor in the Office of Student Services. 

Writing the Master's Thesis

The purpose of the master's thesis is to further your educational development by requiring you to plan, conduct, and report an organized and systematic study of importance. In keeping with the Woodruff School’s policy of educating both practicing and research engineers, a thesis might range from a design project to a fundamental research investigation. Although you may propose a thesis topic and seek an advisor, the usual procedure is for you to work on a problem suggested by a faculty member. If you are employed on a sponsored research project, the thesis will usually be derived from this work.

Suggested Content of the Thesis

A master's thesis should present information in four steps:

  • Describe a problem or question
  • Motivate the problem or question
  • Provide a solution to that problem or an answer to the question
  • Discuss or validate the solution or answer.

The first two of these steps provide introductory information that generally fills one or two chapters of the final document. The information provided in the third and fourth steps is governed by the scope of the project and by the kind of documentation that is deemed appropriate to the project. An experimental project, for example, is likely to require different kinds of evidence than might a redesign project. Such differences in the standards for evidence will directly impact the length of the final thesis, and they will impact the kinds of illustrations that are selected for inclusion in the final document.

Next is a list of the most common format headings for a master's thesis. Under each heading, we list the kinds of information typically presented under that heading. These information listings are necessarily schematic. Since thesis documents will vary according to project scope and evidentiary standards, you should view the listings as a point of departure from which to begin your own work.

On one sheet of paper, list the problem(s) addressed by the project and the solutions that are reported in the thesis.

Introduction

Describe the need or question that is addressed in the project. Also, explain the benefits of addressing the need or answering the question, and explain briefly what solution you have developed.

Describe the background of the need or question, addressing some combination of the following:

  • A review of published literature
  • A survey of existing products or patents
  • A survey of industrial efforts to address the problem or need

Explain your strategy for addressing the problem, including theory and comparative benchmarks, as required. Describe the specific steps you have taken to address the problem, such as experimentation, computer modeling or simulation, and design and evaluation.

Results and Discussion

Present, explain, and evaluate the results obtained on each component of the project.

Summarize your conclusions and outline the questions raised or left open by your project.

Presentation

Step 1. Provide the completed written thesis to your committee members

  • Master's students who are preparing a thesis must give an oral presentation of their work. This presentation is not a formal defense. Rather, approval of the thesis is based upon the written document. The presentation may be scheduled only after the student’s thesis advisor has reviewed the completed written document and considers the thesis to be satisfactory.

Step 2. Schedule the M.S. Thesis Oral Presentation and submit the Thesis Presentation Announcement to the Office of Student Services

  • Poll the members of your reading committee to establish a date and time for the presentation. Reserve a room for your oral presentation.  Submit your announcement at the following link:

         Submit your announcement

  • This step must be completed at least two weeks (14 days) before the presentation. The announcement will be posted to the Woodruff School calendar.

Step 3. Submit Final Forms

  • The Thesis/Proposal/Dissertation Assessment form is now available in Qualtrics . Each committee member must complete the Qualtrics form at the conclusion of the presentation. The form will be routed to the Office of Student Services for further processing.
  • After your presentation, complete the Certificate of MS Thesis Approval form via DocuSign. Please list Dr. Andrei Fedorov as the Graduate Coordinator/Staff Administrator. Your committee will sign off on your form via the email request. Please email a copy of the completed signed form to your Staff Academic Advisor once you receive it back.
  • The committee chair will submit the forms to the Office of Student Services. 

IMPORTANT NOTICE

You must be registered during the semester in which the final presentation occurs, unless an Enrollment Waiver is requested and approved.

Enrollment Waiver

Submitting the Master's Thesis

Format Check

You are urged to have your thesis format checked before making the final copies for your committee. To make an appointment to have the format of your thesis checked, please call the Graduate Thesis Office (Savant Building, Room 318) at 404-894-3092, or e-mail [email protected] .

There are deadlines for the initial format check that is one week before the final submission deadline. There is a recommended deadline, but initial format checks will not be done in the week leading up to the thesis deadline; only final submissions will be checked that week.

  • The specific requirements for the format, publication, and distribution of the thesis are explained here:

         Theses & Dissertations Resources

Electronic Submission of Theses and Dissertations

Paper copies should be given to your advisor and the members of your reading committee, unless the members request a different format.

  • Please submit your theses electronically to the Graduate Studies office:

         Electronic Submission

Enter the requested information about yourself and your thesis/dissertation and upload your thesis or dissertation in PDF format. Once you submit the documents electronically, an e-mail notice will be sent to your committee members.

The Thesis Approval Page will be the second page in your thesis/dissertation, but it will not show any signatures. List the committee members who approved your thesis or dissertation, but remove the signature lines and be certain you type in the date, which is the date that the final draft of your thesis/dissertation was approved.

The Graduate Office will check your electronic document and let you know about any corrections you must make. Make the corrections and resubmit the corrected file. If the Graduate Office has all the related documents, your thesis/dissertation will be approved and they will notify the Registrar's Office that you are eligible to graduate. Once you have graduated, your thesis/dissertation will be released for electronic circulation.

  • < Back to MS Degree Program

UKnowledge

UKnowledge > College of Engineering > Mechanical Engineering > Theses & Dissertations

Theses and Dissertations--Mechanical Engineering

Theses/dissertations from 2024 2024.

The Determination of Darcy Permeabilities and Slip Parameters in Porous Thermal Protection Media via Pressure-Driven Steady Flows at Varying Levels of Thermal Decomposition , John Ryan O'Nan

Theses/Dissertations from 2023 2023

Utilization of Uncrewed Aircraft Systems Towards Investigating the Structure of the Atmospheric Surface Layer , Loiy Al-Ghussain

MECHANICAL ENERGY HARVESTER FOR POWERING RFID SYSTEMS COMPONENTS: MODELING, ANALYSIS, OPTIMIZATION AND DESIGN , Alireza Babaei

Impact of spallation and internal radiation on fibrous ablative materials , Raghava Sai Chaitanya Davuluri

ANISOTROPIC MATERIAL BEHAVIOR OF 3D PRINTED FIBER COMPOSITES , Jordan Garcia

Stratospheric Glider Measurements of Atmospheric Parameters , Anisa Haghighi

Attrition Study of Copper-Supplemented Iron-Based Oxygen Carrier for Chemical Looping Combustion , Neng Huang

MACHINE LEARNING FOR ADVANCING AUTOMATION AND QUALITY CONTROL IN ROBOTIC WELDING , Joseph Kershaw

A computational fluid dynamic analysis of oxyacetylene combustion flow for use in material response boundary conditions , Craig Meade

MULTISCALE MODELING OF CARDIAC GROWTH AND BAROREFLEX CONTROL , Hossein Sharifi

Precision Meteorological Prediction Employing A Data-Driven, Adaptive, Real-Time (DART) Approach , Sujit Sinha

Parallel Real Time RRT*: An RRT* Based Path Planning Process , David Yackzan

Theses/Dissertations from 2022 2022

IN-SITU CHARACTERIZATION OF SURFACE QUALITY IN γ-TiAl AEROSPACE ALLOY MACHINING , David Adeniji

NUMERICAL AND SCALING STUDY ON APPLICATION OF INKJET TECHNOLOGY TO AUTOMOTIVE COATING , Masoud Arabghahestani Dr.

EXPERIMENTAL INVESTIGATION OF ROUGHNESS AND BLOWING EFFECTS OVER ABLATOR-LIKE SURFACES , Colby Borchetta

Energy and Economic Modeling of Stillage Dewatering Processes in Kentucky Bourbon Distilleries , William Brennan

Peridynamic Material Correspondence Models: Bond-Associated and Higher-Order Formulations , WaiLam Chan

A Decoupled Engineering Methodology for Accurate Prediction of Ablative Surface Boundary Conditions in Thermal Protection Systems , Justin Cooper

QUANTITATIVE METHODS FOR TOTAL LIFECYCLE RISK LIKELIHOOD AND IMPACT ASSESSMENT IN SUSTAINABLE PRODUCT DESIGN DECISION MAKING , Christian Enyoghasi

Numerical Investigation of an Oxyacetylene Torch With Regards to an Ablative Material , Luke Fortner

Formation Control with Collision Avoidance for Fixed-Wing Unmanned Air Vehicles With Speed Constraints , Christopher Heintz

Radiative Conductivity Estimation Using Direct Approach For Fibrous Materials , Mohammad Khaleel

Modeling Human Control Behavior in Command-following Tasks , Sajad Koushkbaghi

Formation Control with Bounded Controls and Collision Avoidance: Theory and Application to Quadrotor Unmanned Air Vehicles , Zachary S. Lippay

Small-Satellite Attitude Control Using Sinusoidal Actuator Motion: Experiments on the International Space Station , K. Ryan Lush

Page 1 of 14

Advanced Search

  • Notify me via email or RSS

Browse by Author

  • Collections
  • Disciplines

Author Corner

  • Submit Research

New Title Here

Below. --> connect.

  • Law Library
  • Special Collections
  • Copyright Resource Center
  • Graduate School
  • Scholars@UK

Logo of Kentucky Research Commons

  • We’d like your feedback

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

University of Kentucky ®

An Equal Opportunity University Accreditation Directory Email Privacy Policy Accessibility Disclosures

MS in Mechanical Engineering - Thesis Guidelines

Students may choose to pursue a thesis as part of their MS degree program, but only with the consent of a faculty advisor willing to supervise the thesis work. 

Preparation of a thesis representing an independent research work is a pivotal phase of this MS degree program. It provides the student with an opportunity to work on an open-ended problem, developing a particular solution that is not pre-determined and involving synthesis of knowledge and intellectual creativity. The thesis may involve an investigation that is fundamental in nature, or may be applied, incorporating theory, experimental testing and/or analytical modeling, and/or creative design. Through the thesis, candidates are expected to give evidence of competence in research and a sound understanding of the area of specialization involved. Students are also strongly encouraged to present their research at scientific conferences and publish the results of their thesis research in a peer-reviewed journal.

Students receive a grade of Y (incomplete) in these courses as long as the thesis in progress. Eventual thesis grades replace the incomplete grades upon formal completion of the thesis. In order to receive a grade of Y for ME-0296, students must submit a  thesis prospectus  that outlines the area of work, thesis goals, proposed approach and a review of relevant past work in the literature before the end of the first semester in which the student enrolls in ME-0296, typically the third semester of full-time study. An example of a recent MS thesis prospectus can be found in the Mechanical Engineering office.

The examining committee for MS candidates completing theses should be composed of three (3) members.

  • Thesis advisor (committee chair)
  • One technical expert outside of the ME department
  • A third member of the committee, often another faculty member in the ME department

The committee chair is normally a full-time, tenure-track faculty member. One committee member must be from outside the ME department. Thesis normally counts as 9 credits towards the MS degree requirements. However, a student, with the approval of his/her thesis advisor, has the option to complete a 6-credit thesis by submitting a petition form to the Department. This petition must be signed by the student and the thesis advisor and will become part of the student's academic record. With a 6-credit thesis, a student must complete an extra graduate-level course (for a total of 8 courses) to fulfill the 30-credit requirement for graduation. This option is not typically available to those intending to pursue a Ph.D. degree. 

Thesis Completion

The MS thesis is completed upon:

  • A successful oral defense (open to the community)
  • Submittal of an approved thesis to the Office of Graduate Studies

The student should consult the  Graduate Student Handbook  for specific dates and deadlines for this process in the graduation semester.

mechanical technology thesis title

List Of Project/Thesis Topics For M.E. /M.TECH Mechanical Engineers.

  • STRUCTURAL ANALYSIS OF A FLAT
  • BED VIBRATION ANALYSIS OF A FLATBED 
  • MECHANICAL AND THERMAL BUCKLING OF THIN FILMS 
  • FATIGUE RESISTANCE ANALYSIS OF A FUEL INJECTION COMPONENT 
  • DESIGN /ANALYSIS OF MACHINE TOOL ELEMENTS USING UNIGRAPHICS/ANSYS 
  • VIBRATION ANALYSIS OF A ROTARY COMPRESSOR 
  • FIELD PROBLEM OF A CABIN MOUNTING BRACKET OF LOAD-KING PRIDE 
  • DESIGN AND ANALYSIS OF MINIATURE POSITIVE DISPLACEMENT PUMP 
  • CAVITATION IN THE COOLING FLUID OF AN IC DIESEL ENGINE DUE TO FORCES GENERATED IN A PISTON-CYLINDER ASSEMBLY 
  • INVESTIGATIONS ON SLIDING CONTACT CHARACTERISTICS OF FRP COMPOSITE BEARINGS 

mtech me project list

  • CUTTING DYNAMICS OF HIGH SPEED MACHINING OF THIN RIBBED STRUCTURES 
  • STABILITY ANALYSIS OF BALL BEARING CONSIDERING THE EFFECT OF WAVINESS IN BALL BEARING ASSEMBLY SYNOPSIS 
  • PRE-STRESSED MODAL ANALYSIS OF ENGINE SHROUD OF LAWN BOY ENGINE 
  • OPTIMIZATION OF DIE EXTRUSION PARAMETERS USING FEM. 
  • RANDOM VIBRATION ANALYSIS OF COMPRESSOR HOUSING: 
  • OPTIMUM DESIGN AND ANALYSIS OF COMPOSITE DRIVE SHAFT FOR AN AUTOMOBILE 
  • STRUCTURAL ANALYSIS OF A REFRIGERATOR COMPRESSOR CRANK SHAFT 
  • STRUCTURAL STATIC ANALYSIS ON CRANKSHAFT BEARING ASSEMBLY 
  • MODAL ANALYSIS OF INTAKE MANIFOLD OF A CARBURETTOR 
  • STRUCTURAL STATIC ANALYSIS OF CYLINDER HEAD 
  • OPTIMIZATION OF THE JIG DESIGN 
  • MODAL ANALYSIS OF REFRIGERATOR COMPRESSOR CYLINDER HEAD 
  • MODAL ANALYSIS OF VALVE PLATES AND COMPARE THE RESULTS BETWEEN THE TWO VALVE PLATES. 
  • MODAL ANALYSIS OF SUCTION VALVE 
  • TO PERFORM STRUCTURAL STATIC ANALYSIS ON A CRANK SHAFT 
  • TO PERFORM STRUCTURAL STATIC ANALYSIS ON A FLANGE: 
  • SIMULATION OF CENTRIFUGAL PUMP PERFORCE USING CFD TOOL AND OPTIMIZATION OF THE PUMP FOR THE IMPROVED PERFORMANCE 
  • MODAL ANALYSIS OF MUFFLER GUARD 
  • Thermal analysis of Coolant Plumbing pipe 
  • HEAT TRANSFER IN THE CYLINDER HEAD OF A TWO-STROKE ENGINE 
  • Chasis design for HCV 
  • Analysis Of A C Class Adhesively Bonded Car Floor Structure Joints
  • Analysis Of A C Class Spot Welded Car Floor Structure Joints
  • Automotive System Design Of Lcv (Low Carbon Vehicle) Pick Up
  • Briquette Manufacturing In A Controlled Environment And Its Effects On Combustion
  •  Crash Analysis Of Student Model Lcv Chassis For Low And High Speed Rear Impact
  • Design And Analysis Of Battery Carrying Structure Of An Automobile For Static And Dynamic Loading
  • Design Of Lcv (Low Carbon Vehicle) Diesel Hybrid Suv
  • Front Crash Analysis Of Student Model Lcv Chassis
  • Projects For Mechanical Engineering Students
  • Regenerative Suspension System Retrofitted To The Vehicle
  • Retrofit Kers (Kinetic Energy Recovery System) To Land Rover Vehicle
  • Study And Research On Regenerative Braking System
  • Study On Structural Behavior Of Automotive Muffler Through Fea
  • Study On Thermal Behavior Of Automotive Muffler
  • Study On Thermal Behavior Of Manifold Assembly
  • Thermal Behavior Of Exhaust Manifold (Thermal Fatigue Analysis)
  • Thermo Electric Energy Recovery System

CAD / CAM Projects List - Abstract , Report Download

New Mechanical Projects 2020 ( All Projects Post Index List )

Related posts:

Default Thumbnail

Sachin Thorat

Sachin is a B-TECH graduate in Mechanical Engineering from a reputed Engineering college. Currently, he is working in the sheet metal industry as a designer. Additionally, he has interested in Product Design, Animation, and Project design. He also likes to write articles related to the mechanical engineering field and tries to motivate other mechanical engineering students by his innovative project ideas, design, models and videos.

One thought on “ List Of Project/Thesis Topics For M.E. /M.TECH Mechanical Engineers. ”

I am looking for technical support in Fuel cell storage thesis topic. Do you any colleague to support in this topic?

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name and email in this browser for the next time I comment.

This site uses Akismet to reduce spam. Learn how your comment data is processed .

Recent Posts

Top Branches of Mechanical Engineering

Mechanical Engineering is an essential discipline of engineering encompassing many specializations, with each contributing its unique aspect to the dynamic and inventive nature of this field. With...

Shree Ram Ayodhya Murti, idol - Vector , Wallart

The Ram Lalla idol, which is installed at Ayodhya's Ram temple has many significant religious symbols from Hinduism. All 10 incarnations of Lord Vishnu are engraved on the idol. Notably, Lord Ram is...

Eindhoven University of Technology research portal Logo

  • Help & FAQ

Mechanical Engineering

Student theses.

  • 1 - 50 out of 5,004 results
  • Title (descending)

Search results

(structural) identification of a single track truck model.

Supervisor: Nijmeijer, H. (Supervisor 1) & Bekkers, F. P. J. (External coach)

Student thesis : Master

(Voor-)ontwerp van een transportsysteem voor productstroken

Supervisor: Smals, A. T. J. M. (External person) (Supervisor 1)

1D parameter study on tar conversion in counterflow diffusion flames

Supervisor: de Goey, L. P. H. (Supervisor 1), van Oijen, J. A. (Supervisor 2) & Vogels - Verhoeven, L. M. (Supervisor 2)

2D Core flow instability in a wide vaneless diffuser: experimental set-up design

Supervisor: van Steenhoven, A. A. (Supervisor 1), de Lange, H. C. (Supervisor 2) & Ljevar, S. (External person) (External coach)

2D Detection of Carton Boxes from RGB images

Supervisor: Saccon, A. (Supervisor 1) & De Queiroz Mendes, R. (Coach)

Student thesis : Bachelor

2D in-cylinder temperature and fuel distribution measurements using two-color LIF

Supervisor: Izadi Najafabadi, M. (Supervisor 1), Dam, N. J. (Supervisor 2) & Deen, N. G. (Supervisor 2)

2D temperature measurements in the EHPC using laser-induced phosphorescence

Supervisor: de Goey, L. P. H. (Supervisor 1), Aldén, L. E. M. (External coach), Dam, N. J. (Supervisor 2), Luijten, C. C. M. (Supervisor 2), Speetjens, M. F. M. (Supervisor 2) & Yu, M. (Supervisor 2)

2-D temperature measurements in water using laser induced fluorescence

Supervisor: van Steenhoven, A. A. (Supervisor 1), Rindt, C. C. M. (Supervisor 2), Kieft, R. (Supervisor 2) & van der Plas, G. A. J. (Supervisor 2)

2-D temperatuurmetingen met behulp van "laser-induced fluorescence"

Supervisor: van Steenhoven, A. A. (Supervisor 1), Kieft, R. (Supervisor 2), Rindt, C. C. M. (Supervisor 2) & van der Plas, G. A. J. (Supervisor 2)

3D FE implementation of an incompressible quadriphasic mixture model for large deformations

Supervisor: Baaijens, F. P. T. (Supervisor 1) & Huyghe, J. M. R. J. (Supervisor 2)

3D geometry reconstruction based on limited experimental data

Supervisor: Wijnen, J. (Supervisor 1) & Peerlings, R. H. J. (Supervisor 2)

3D geometry reconstruction of multi-phase materials with limited experimental data using the Phase Field method

3d modelling and validation of boiler emissions using the flamelet generated manifold technique.

Supervisor: de Goey, L. P. H. (Supervisor 1) & Vance, F. H. (Supervisor 2)

3D Object Detection From LiDAR data using Distance Depended Feature Extraction

Supervisor: Dubbelman, G. (Supervisor 1)

3D particle tracking velocimetry of particle-laden turbulent pipe flow

Supervisor: Kuerten, J. G. M. (Supervisor 1) & van der Geld, C. W. M. (Supervisor 1)

3D printing of microfluidic chips with different modules for point-of-care testing applications

Supervisor: den Toonder, J. M. J. (Supervisor 1), Bernards, J. (External person) (External coach) & Planken, K. L. (External coach)

Supervisor: Schellekens, P. H. J. (Supervisor 1), Velzel, C. H. F. (Supervisor 2) & Busselaar, E. J. (External person) (External coach)

3D viscoelastic analysis

Supervisor: Janssen, J. D. (Supervisor 1), Baaijens, F. P. T. (Supervisor 2) & Verbeeten, W. M. H. (Supervisor 2)

5th Generation district heating and cooling in the Efteling

Supervisor: van Bunder, T. M. L. A. (Supervisor 1) & Smeulders, D. M. J. (Supervisor 2)

A 2-D finite element model of a muscle cell in agarose gel-matrix

Supervisor: Baaijens, F. P. T. (Supervisor 1), Oomens, C. W. J. (Supervisor 2), Bouten, C. V. C. (Supervisor 2) & Breuls, R. G. M. (Supervisor 2)

A 3-D finite element model of the tibialis anterior muscle of a rat: a contribution to pressure sores research

Supervisor: Janssen, J. D. (Supervisor 1), Oomens, C. W. J. (Supervisor 2), Bosboom, E. M. H. (Supervisor 2) & Bouten, C. V. C. (Supervisor 2)

A 3-D structural skin model: development and implementation

Supervisor: Starmans, F. J. M. (Supervisor 1), Douven, L. F. A. (Supervisor 2), Oomens, C. W. J. (Supervisor 2) & Janssen, J. D. (Supervisor 2)

Aanbrengen van krimpkappen om verschillende typen beeldbuizen met behulp van een universele automaat

Aandrijvingen van een 3d-meetmachine.

Supervisor: Koster, M. P. (Supervisor 1) & Lammers, M. G. M. (Supervisor 2)

Aanpassing en ontwerp van een injecteermachine

Supervisor: van der Hoorn, R. J. G. A. (Supervisor 1) & Schrauwen, J. J. M. (External person) (External coach)

Aanzet voor een softwarepakket ter analyse van de afwijkingenstructuur van meerassige machines

Supervisor: van der Wolf, A. C. H. (Supervisor 1), Schellekens, P. H. J. (Supervisor 2) & Soons, J. A. (Supervisor 2)

A bottum-up approach for modeling the performance of partially shaded PV systems with power optimizers

Supervisor: Loonen, R. C. G. M. (Supervisor 1) & Bognár, Á. (Supervisor 2)

A brain chip to investigate neurite outgrowth by trapping cell-laden hydrogel beads in microsieves

Supervisor: Bouten, C. (Supervisor 1), Luttge, R. (Supervisor 2), Kurniawan, N. (Supervisor 2) & Bastiaens, A. (Supervisor 2)

Absolute Stress Measurement at the Microscale Using High Resolution Electron Backscatter Diffraction and Focused Ion Beam Ring-core Milling

Supervisor: Hoefnagels, J. P. M. (Supervisor 1)

A Case Study on Performance Degradation of Cooling Coils in the Netherlands

Supervisor: Zeiler, W. (Supervisor 1), Slootweg, H. (Supervisor 2), Schellen, H. (Supervisor 2), van den Brink, A. (Supervisor 2) & Katic, K. (Supervisor 2)

Accuracy analysis of an Atomic Force Microscope

Supervisor: Schellekens, P. H. J. (Supervisor 1), Haitjema, H. (Supervisor 2) & Pril, W. O. (Supervisor 2)

Accuracy analysis of multi-axis machines by Double Ball Bar method

Supervisor: Schellekens, P. H. J. (Supervisor 1) & Levasier, L. M. (Supervisor 2)

Accuracy evaluation of a kinematic tractor semi-trailer model using real-world measurement data

Supervisor: Besselink, I. J. M. (Supervisor 1) & Gosar, V. (Supervisor 2)

Accuracy of simulation methods for Differential Algebraic Equations of the simple and double pendulum

Supervisor: Cortes Garcia, I. (Supervisor 1)

Accuracy of Single Camera Pose Estimation with ArUco Fiducial Markers

Supervisor: Arslan, Ö. (Supervisor 1) & Işleyen, A. (Supervisor 2)

Accuracy of speed prediction of a self-propelled vessel using CFD

Supervisor: van Esch, B. P. M. (Supervisor 1) & Mikelic, A. (External coach)

A CFD study on DME/Methanol fuelled unconventional RCCI

Supervisor: Somers, L. M. T. (Supervisor 1)

A Combined Safety and Security based system development process for Automotive Applications

Supervisor: Barosan, I. (Supervisor 1), van Uden, J. G. S. (External coach) & van Bergeijk, K. (External coach)

A combustion model for a closed-cycle dieselengine

Supervisor: Evers, D. J. W. M. (Supervisor 1)

A comparative study between TRNSYS and RC thermal models to simulate a district thermal demand

Supervisor: Rindt, C. C. M. (Supervisor 1) & Jiang, M. (Supervisor 2)

A comparative study of conventional and pipeless batch plants

Supervisor: Rooda, J. E. (Supervisor 1), Drinkenburg, A. A. H. (Supervisor 2) & van Beek, D. A. (Coach)

A comparative study on modern lane detection algorithms

Supervisor: Dubbelman, G. (Supervisor 1) & Das, A. (Supervisor 2)

A comparison of timed games and time optimal supervisor synthesis

Supervisor: Rooda, J. E. (Supervisor 1) & van de Mortel-Fronczak, J. M. (Supervisor 2)

A comparison study between power-split CVTs and a push-belt CVT

Supervisor: Hofman, T. (Supervisor 1), Veenhuizen, P. A. (Supervisor 2) & Steinbuch, M. (Supervisor 2)

A computational fracture mechanics study of buckling in thin film systems

A computational model for evaluating a district heating system using a biomass heat source and thermal energy storage.

Supervisor: Hensen, J. L. M. (Supervisor 1), Nguyen, H. P. (Supervisor 2), Loomans, M. G. L. C. (Supervisor 2), Bynum, J. D. (Supervisor 2), Torrens Galdiz, J. I. (Supervisor 2) & de Schrevel, R. A. M. (External person) (External coach)

A computational study of tilted turbines: Examination of power production at different wind directions

Supervisor: Verhoosel, C. V. (Supervisor 1) & van de Klippe, R. (External person) (External coach)

A computational study on the role of glide plane interaction on the dislocation behavior by means of the Peierls-Naborro model

Supervisor: Bormann, F. (Supervisor 1) & Peerlings, R. (Supervisor 2)

A computer simulation of a slabbing mill with conventional direct current and superconducting machines

A concept for a low noise fan drive.

Supervisor: Meijlink, T. J. J. (Supervisor 1) & Verschuijten, J. A. M. (External coach)

Animo Repository

Home > ETD > Mechanical Engineering > ETDM_MECHENG

Mechanical Engineering Master's Theses

Theses/dissertations from 2023 2023.

Development of a finite element analysis model for fatigue crack propagation of energy storage flywheel rotors , Ailene B. Nuñez

An application of multi-criteria decision Analysis Methods in the Design of Alternative-Fueled Vehicle Systems for Different Transportation Sectors in the Philippines , Jaime Alonzo M. Poblete

Theses/Dissertations from 2022 2022

Analyzing the impact of EV charging to the power grid with emphasis on behavioral factors and charging infrastructure availability , Adrian A. Allana

Scenario analysis of policies supporting electric jeepney adoption using hybrid agent-based system dynamics model , Jeun Rei Benitez Barlis

Detection of cloudy spot defects on PET preforms using machine learning , Isabelle D. Co

Interfacial delamination analysis on fan-out wafer-level package using finite element method , Ariel P. Conversion

Spatiotemporal modeling of electric vehicle charging demand for strategic EV charger deployment in Metro Manila , Edwin Bernard F. Lisaba Jr.

Finite element analysis of active metal braised semiconductor package for warpage reduction , Roberto Louis P. Moran

A study on microalgal biorefinery system with use phase uncertainty and allocation analysis , Earle Anderson Sy Ng

Evaluation of the effects of electric vehicle battery cells layout and conductive sheet fins thickness to battery cooling using transportation micro-simulation modeling and finite element steady-state thermal analysis , Joshua Ezekiel Dimaunahan Rito

Spatial investigation of energy equity with consideration of the renewable energy transition , Christian Roice Tayag

Theses/Dissertations from 2021 2021

Swarm object transportation through phase transitions , Joseph Aldrin T. Chua

BEM theory analysis of a small biomimetic HAWT , Von Eric A. Damirez

Development of a life cycle assessment for chemical looping combustion , John Patrick D. Mercado

Multi-country analysis of driving factors to carbon emission using LMDI decomposition analysis method and rough set modeling , Mouy Meta

Multi-country analysis of driving factors to carbon emissions using LMDI decomposition analysis method and rough set modeling , Meta Mouy

Theses/Dissertations from 2020 2020

Quadrotor drone manipulation using neuro fuzzy algorithm with non-invasive brain-computer interface , Timothy Scott C. Chu

Theses/Dissertations from 2019 2019

Prediction and optimization models for integrated renewable-storage energy systems in mixed-use buildings , Aaron Jules R. Del Rosario

Development of a UAV with hand gesture recognition using deep learning , Calvin Alexander Y. Ng

Configuration enhancement for the flight endurance of a separate-lift-and-thrust hybrid unmanned aerial vehicle using Gaussian process optimization , Francis Gregory L. Ng

Theses/Dissertations from 2018 2018

Cooling load calculation and AHU equipment selection for a nutritional dry blend facility , John Paul Christian L. Benosa

Design criteria assessment for ball grid array semiconductor packaging based on thermomechanical simulation and crack analysis , Niño Rigo Emil G. Lim

Development of a predictive aeration strategy for microalgae cultivation in photobioreactors , Jeremy Jay B. Magdaong

Assessing energy security cost of the transport sector , Jimwell L. Soliman

Fabrication and characterization of lead tin telluride (Pb1-x SnxTe) thermoelectric nanomaterial using horizontal vapor phase growth technique (HVPG) , Sam Sopheap

Theses/Dissertations from 2017 2017

Bilevel fuzzy optimization model of an algae-based eco-industrial park under cooperative game theory , Kyle Darryl T. Aguilar

A fuzzy-genetic robust optimization framework for UAV conceptual design , Lemuel F. Banal

Performance analyses of low Reynolds number airfoils for small-scale horizontal axis wind turbines , John Christian T. Chua

An evaluation methodology with applied life-cycle assessment of coal-biomass cofiring in Philippine context , Dan William C. Martinez

Hydrodynamic investigation and characterization of a photo-bioreactor for microalgae cultivation , Andres Philip Mayol

Computational fluid dynamics analysis on the performance of the new design of savonius wind turbine for urban wind energy exploitation systems , San Rathana

A vacuum drying characterization and optimization of spirulina sp. using definitive screening design of experiment , Christian Joseph C. Ronquillo

Development of supply chain based fuel cycle inventory model for the Philippines , Alexis Mervin T. Sy

Optimization of one-part geopolymer based on fly ash and volcanic ash for soil stabilization , April Anne S. Tigue

Theses/Dissertations from 2016 2016

Performance, emission and net energy analysis of a diesel genset using producer gas from jatropha press-cake in dual fuel miode , Nechoh A. Arbon

Optimization of in situ transesterification of wet microalgae chlorella vulgaris under subcritical conditions , Charles B. Felix

Regional feasibility analysis of wind and solar renewable technologies in the Philippines using analytic hierarchy process (AHP) , Neil Stephen A. Lopez

Theses/Dissertations from 2015 2015

Development of gas leak detection system using fuzzy logic, optical flow and neural networks , Edgar Carrillo II

Synthesis and characterization of silver-titanium dioxide nanomaterials via horizontal vapor phase growth (HVPG) technique for antibacterial applications , Muhammad Akhsin Muflikhun

Combustion effect of jatropha producer gas fumigation in a stationary diesel genset , Monorom Rith

Theses/Dissertations from 2014 2014

Investigation of the effects of a blade profile geometry in a hinged blade cross axis turbine , Arvin H. Fernando

Design of a fuzzy GS-PID controller for payload drops of varying mass for a quadrotor , Ivan Henderson V. Gue

Energy audit of St. Joseph Hall and Miguel Hall of De La Salle University , Oswald D. Sapang

Theses/Dissertations from 2013 2013

Experimental evaluation and net energy analysis of methane gas production through anaerobic digestion of jatropha press-cake and pig manure , Jeremias A. Gonzaga

A study on the performance of jatropha press cake-coal cofiring in a fluidized bed combustion system , Maria Flor De Liza F. Jarquio

A molecular study on the effects of osmotic pressure on the lipids of microalgae chlorella vulgaris , Robby B. Manrique

Theses/Dissertations from 2012 2012

Automated bulk cartoning of folded sachet linked strips using constrained gravity stacking , Aaron Dee Bea

Vision based pedestrian detection using histogram of oriented gradients, adaboost, linear support vector machines and optical flow , Samantha Denise Fuentes Hilado

Theses/Dissertations from 2011 2011

Optimization of power train components of electric tricycle based on life cycle cost , Precious L. Alvarez

Research on life-cycle based simulation of the integration of compressed natural gas (CNG) buses in the Philippine transport sector , Lawrence M. Bersales

Energy modeling, fabrication and evaluation of a small-scale natural convection solar dryer for microalgae biofuel production , Neil Stephen A. Lopez

Life Cycle Assessment (LCA) of utilizing rice husk as alternative in Portland clinker production fuel , Daniel Joseph P. Mariano

Theses/Dissertations from 2009 2009

Design and optimization of a propeller type micro-hydro turbine using computational fluid dynamics , Isidro Antonio V. Marfori III

Theses/Dissertations from 2007 2007

A design analysis for small horizontal-axis wind turbine (HAWT) 3-bladed rotor , Byron Michael Codilla Omboy

Theses/Dissertations from 2006 2006

Optimizing the extraction of oil from sugarcane bagasse using thermochemical liquefaction , George Herbert L. Ang

Computer based evaluation of environmental impact of co-generation system of Distileria Bago, Inc. , Rofuat L. Lu

Emergy analysis for materials selection of small hydropower station , Rey L. Rifareal

An energy audit study of manufacturing operations in the Philippines , Yuri Sangala

Theses/Dissertations from 2005 2005

Design, fabrication, and testing of flexible noodle separator in pouch noodle packing , Karlo Roman C. Garcia

An energy audit study of Cavite State University Indang, Cavite , Ronald P. Peña

Theses/Dissertations from 2004 2004

Design and experimental analysis of a combined target fluidic and centrifungal pump system as a tachometer transducer , Lawrence K. Uy

Theses/Dissertations from 2003 2003

Design, fabrication and performance testing of stationary freezer of Jollibee Food Corporation using non-CFC refrigerator (R-404A) , Kenways S. Chee

A study on the co-combustion of rice hull and low-grade coal using a fluidized bed combustion system , Stevan S. Dimaguila

Theses/Dissertations from 2002 2002

Performance curve generation of an unglazed transpired collector system for a fish and crop solar drier , Jose Bienvenido Manuel M. Biona

Spectrally selective visible and solar transmitting heat barrier coating for flat-plate collector , Reynaldo C. Muli

Theses/Dissertations from 2001 2001

Using fuzzy logic in the governing system of a micro-hydro power plant , Laurence A. Gan Lim

Theses/Dissertations from 2000 2000

PC-based retrofitting designed for the automation of a conventional milling machine , Richard Alducente Bayona

Theses/Dissertations from 1998 1998

Occupational health and safety program for the U.S. Metal Industry Company, Inc. , Ronaldo A. Juanatas

Development of a maintenance program for the stamping, drawing, and bending divisions U.S. Metal Industry Co., Inc. , Joselito H. Recio

Occupational health and safety program for the metalcasting technology division of the Metals Industry Research and Development Center , Arnel O. Valdez

Theses/Dissertations from 1997 1997

Bottling line modification project in Bacolod brewery , Maximo A. Merilo

Design and evaluation of a calibration station for liquid types of flowmeters using water as test medium , Roxan De Luna Roxas

Theses/Dissertations from 1994 1994

Design and evaluation of locally-fabricated water-pumping windmill for small-scale irrigation , Pablito O. Anino Sr.

The design of an instrumented charpy impact tester using the deconvolution method , Alvin Y. Chua

Design and evaluation of waste heat recovery refrigeration apparatus , Jimmy Guillena

Computer modeling and simulation of a single cylinder, 4-stroke cycle, gasoline fueled spark ignition engine , Martin Ernesto L. Kalaw

Laboratory-scale combustion of coal-oil mixtures , Gileo Capagngan Sulla

Advanced Search

  • Notify me via email or RSS
  • Collections
  • Disciplines
  • Colleges and Units

Submissions

  • Submission Consent Form
  • Animo Repository Policies
  • Submit Research
  • Animo Repository Guide
  • AnimoSearch
  • DLSU Libraries
  • DLSU Website

Home | About | FAQ | My Account | Accessibility Statement

Privacy Copyright

30 Best universities for Mechanical Engineering in Moscow, Russia

Updated: February 29, 2024

  • Art & Design
  • Computer Science
  • Engineering
  • Environmental Science
  • Liberal Arts & Social Sciences
  • Mathematics

Below is a list of best universities in Moscow ranked based on their research performance in Mechanical Engineering. A graph of 269K citations received by 45.8K academic papers made by 30 universities in Moscow was used to calculate publications' ratings, which then were adjusted for release dates and added to final scores.

We don't distinguish between undergraduate and graduate programs nor do we adjust for current majors offered. You can find information about granted degrees on a university page but always double-check with the university website.

1. Moscow State University

For Mechanical Engineering

Moscow State University logo

2. Bauman Moscow State Technical University

Bauman Moscow State Technical University logo

3. National Research University Higher School of Economics

National Research University Higher School of Economics logo

4. Moscow Aviation Institute

Moscow Aviation Institute logo

5. N.R.U. Moscow Power Engineering Institute

N.R.U. Moscow Power Engineering Institute logo

6. National Research Nuclear University MEPI

National Research Nuclear University MEPI logo

7. National University of Science and Technology "MISIS"

National University of Science and Technology "MISIS" logo

8. Moscow Institute of Physics and Technology

Moscow Institute of Physics and Technology logo

9. Moscow State Technological University "Stankin"

Moscow State Technological University "Stankin" logo

10. RUDN University

RUDN University logo

11. Moscow Polytech

Moscow Polytech logo

12. Moscow State University of Railway Engineering

Moscow State University of Railway Engineering logo

13. Finance Academy under the Government of the Russian Federation

Finance Academy under the Government of the Russian Federation logo

14. Moscow Medical Academy

Moscow Medical Academy logo

15. Russian State University of Oil and Gas

16. mendeleev university of chemical technology of russia.

Mendeleev University of Chemical Technology of Russia logo

17. Russian National Research Medical University

Russian National Research Medical University logo

18. Plekhanov Russian University of Economics

Plekhanov Russian University of Economics logo

19. National Research University of Electronic Technology

National Research University of Electronic Technology logo

20. Moscow State Pedagogical University

Moscow State Pedagogical University logo

21. Russian Presidential Academy of National Economy and Public Administration

Russian Presidential Academy of National Economy and Public Administration logo

22. State University of Management

State University of Management logo

23. Moscow State Institute of International Relations

Moscow State Institute of International Relations logo

24. Russian State Geological Prospecting University

25. russian state agricultural university.

Russian State Agricultural University logo

26. New Economic School

New Economic School logo

27. Moscow State Technical University of Civil Aviation

Moscow State Technical University of Civil Aviation logo

28. Russian State University for the Humanities

Russian State University for the Humanities logo

29. Russian State Social University

Russian State Social University logo

30. Moscow State Linguistic University

Moscow State Linguistic University logo

Universities for Mechanical Engineering near Moscow

Engineering subfields in moscow.

Frequently Asked Questions

Essay writing help has this amazing ability to save a student’s evening. For example, instead of sitting at home or in a college library the whole evening through, you can buy an essay instead, which takes less than one minute, and save an evening or more. A top grade for homework will come as a pleasant bonus! Here’s what you have to do to have a new 100% custom essay written for you by an expert.

To get the online essay writing service, you have to first provide us with the details regarding your research paper. So visit the order form and tell us a paper type, academic level, subject, topic, number and names of sources, as well as the deadline. Also, don’t forget to select additional services designed to improve your online customer experience with our essay platform.

Once all the form fields are filled, submit the order form that will redirect you to a secure checkout page. See if all the order details were entered correctly and make a payment. Just as payment is through, your mission is complete. The rest is on us!

Enjoy your time, while an online essay writer will be doing your homework. When the deadline comes, you’ll get a notification that your order is complete. Log in to your Customer Area on our site and download the file with your essay. Simply enter your name on the title page on any text editor and you’re good to hand it in. If you need revisions, activate a free 14-30-day revision period. We’ll revise the work and do our best to meet your requirements this time.

Cookies! We use them. Om Nom Nom ...

19th Edition of Global Conference on Catalysis, Chemical Engineering & Technology

  • Victor Mukhin

Victor Mukhin, Speaker at Chemical Engineering Conferences

Victor M. Mukhin was born in 1946 in the town of Orsk, Russia. In 1970 he graduated the Technological Institute in Leningrad. Victor M. Mukhin was directed to work to the scientific-industrial organization "Neorganika" (Elektrostal, Moscow region) where he is working during 47 years, at present as the head of the laboratory of carbon sorbents.     Victor M. Mukhin defended a Ph. D. thesis and a doctoral thesis at the Mendeleev University of Chemical Technology of Russia (in 1979 and 1997 accordingly). Professor of Mendeleev University of Chemical Technology of Russia. Scientific interests: production, investigation and application of active carbons, technological and ecological carbon-adsorptive processes, environmental protection, production of ecologically clean food.   

Title : Active carbons as nanoporous materials for solving of environmental problems

Quick links.

  • Conference Brochure
  • Tentative Program

Watsapp

IMAGES

  1. Mechanical Engineering Project Titles

    mechanical technology thesis title

  2. (PDF) Mechanical Engineering Postgraduate Programs Handbook

    mechanical technology thesis title

  3. Thesis ideas for mechanical engineering! Mechanical and Automobile

    mechanical technology thesis title

  4. Mechanical Engineering Project Title 2015-2016

    mechanical technology thesis title

  5. Mechanical Engineering Thesis Ideas

    mechanical technology thesis title

  6. Mechanical Engineering Thesis Ideas

    mechanical technology thesis title

VIDEO

  1. PhD Thesis Defense. Konstantin Makarenko

  2. #002 || M-Tech Project || Simulation Of Crank Shaft in Solid Works By Ercoms com

  3. Thesis Title Defense 2024

  4. PhD Thesis Defense. Mikhail Bulavskiy

  5. PhD Thesis Defense. Vadim Sotskov

  6. PhD Thesis Defense. Nikita Akhmetov

COMMENTS

  1. The Best Mechanical Engineering Dissertation Topics and Titles

    Mechanical Engineering Dissertation Topics of 2024. Topic 1: Mini powdered metal design and fabrication for mini development of waste aluminium Cannes and fabrication. Topic 2: Interaction between the Fluid, Acoustic, and vibrations. Topic 3: Combustion and Energy Systems. Topic 4: Study on the Design and Manufacturing.

  2. Mechanical Engineering Masters Theses Collection

    Buckling of Particle-Laden Interfaces, Theo Dias Kassuga, Mechanical Engineering. PDF. Modeling Dynamic Stall for a Free Vortex Wake Model of a Floating Offshore Wind Turbine, Evan M. Gaertner, Mechanical Engineering. PDF. An Experimental Study of the C-Start of a Mechanical Fish, Benjamin Kandaswamy Chinna Thambi, Mechanical Engineering. PDF

  3. Mechanical Engineering Theses and Dissertations

    Waterproofing Shape-Changing Mechanisms Using Origami Engineering; Also a Mechanical Property Evaluation Approach for Rapid Prototyping, Andrew Jason Katz. PDF. Hydrogen Effects on X80 Steel Mechanical Properties Measured by Tensile and Impact Testing, Xuan Li. PDF. Application and Analysis of Asymmetrical Hot and Cold Stimuli, Ahmad Manasrah. PDF

  4. Browsing/Searching: Mechanical Engineering Ph.D. Theses

    Department of Mechanical Engineering, 2023. 2023. 8/31/2025. Elliot Maxwell Snider - Author. Ranga Dias - Thesis Advisor. Application of grinding fundamentals to develop material-specific relationships in the dental-grinding procedure. Thesis (Ph. D.)--University of Rochester.

  5. MIT Theses

    MIT's DSpace contains more than 58,000 theses completed at MIT dating as far back as the mid 1800's. Theses in this collection have been scanned by the MIT Libraries or submitted in electronic format by thesis authors. Since 2004 all new Masters and Ph.D. theses are scanned and added to this collection after degrees are awarded.

  6. Mechanical & Aerospace Engineering Theses & Dissertations

    Theses/Dissertations from 2023 PDF. Thesis: Switching Methods for Three-Dimensional Rotational Dynamics Using Modified Rodrigues Parameters, Matthew Jarrett Banks PDF. Dissertation: Studies of Flowfields and Dynamic Stability Characteristics of a Quadrotor, Engin Baris PDF. Thesis: Development, Experimental Validation, and Progressive Failure Modeling of an Ultra-Thin High Stiffness Deployable ...

  7. Master's Thesis Process

    Step 3. Receive approval from the Woodruff School Graduate Committee and then obtain signatures of remaining committee members. After the Woodruff School Graduate Committee approves your master's thesis reading committee and your Request for Approval of Master's Thesis Topic, you will receive an email from the Office of Student Services.

  8. PDF Strengths and Challenges of Mechanical Design Processes in a Federally

    electronic copies of this thesis document in whole or in part in any medium now known or hereafter created. Signature of Author: Department of Mechanical Engineering December 3, 2021 Certified by: Warren Seering Professor of Mechanical Engineering Thesis Supervisor Accepted by: Kenneth Kamrin

  9. Thesis, Research and Practice

    Read more. MIT's Department of Mechanical Engineering (MechE) offers a world-class education that combines thorough analysis with hands-on discovery. One of the original six courses offered when MIT was founded in 1865, MechE's faculty and students conduct research that pushes boundaries and provides creative solutions for the world's problems.

  10. PDF Master of Science in Mechanical and Manufacturing Engineering

    Master of Science in Mechanical and Manufacturing Engineering Technology (MMET) Thesis Option The Master of Science in Mechanical and Manufacturing Engineering Technology (MMET) degree is an opportunity for students in the program to greatly expand their knowledge of design and integration of mechanical and manufacturing systems.

  11. Mechanical Engineering Undergraduate Honors Theses

    Mechanical Behavior of Cyclo-18 on Nickel and Copper Substrates, Reagan Michael Kraft. PDF. Characterizing High Entropy Alloys for Hypersonic Applications, Katherine Pettus. PDF. Mathematical Modeling of a Two Wheeled Robotic Base, Kathryn Remell. PDF. Transient Performance and Melt Front Characterization of Phase Change Materials, Tyler Stamps

  12. Theses and Dissertations--Mechanical Engineering, University of

    MECHANICAL ENERGY HARVESTER FOR POWERING RFID SYSTEMS COMPONENTS: MODELING, ANALYSIS, OPTIMIZATION AND DESIGN, Alireza Babaei. PDF. Impact of spallation and internal radiation on fibrous ablative materials, Raghava Sai Chaitanya Davuluri. PDF. ANISOTROPIC MATERIAL BEHAVIOR OF 3D PRINTED FIBER COMPOSITES, Jordan Garcia. PDF

  13. PDF Guide to Graduate Study in Mechanical Engineering

    All official transcripts must be submitted directly to the MechE Graduate Office, Room 1-112, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, MA 02139 but only after the student has been admitted. All electronic transcripts should be submitted to [email protected].

  14. MS in Mechanical Engineering

    An example of a recent MS thesis prospectus can be found in the Mechanical Engineering office. The examining committee for MS candidates completing theses should be composed of three (3) members. The committee chair is normally a full-time, tenure-track faculty member. One committee member must be from outside the ME department.

  15. List Of Project/Thesis Topics For M.E. /M.TECH Mechanical Engineers

    List Of Project/Thesis Topics For M.E. /M.TECH Mechanical Engineers. STRUCTURAL ANALYSIS OF A FLAT BED VIBRATION ANALYSIS OF A FLATBED MECHANICAL AND THERMAL ... Manufacturing Technology (154) Material Science (42) Mechanical Projects Report (652) Mechanical Seminar (85) Mechatronics (36) Metrology and Instrumentation (61) Power Engineering (38 ...

  16. Mechanical Engineering

    A computational study on the role of glide plane interaction on the dislocation behavior by means of the Peierls-Naborro model. Author: Garcia Rodriguez, A., 11 Dec 2018. Supervisor: Bormann, F. (Supervisor 1) & Peerlings, R. (Supervisor 2) Student thesis: Master.

  17. Mechanical Engineering Master's Theses

    Theses/Dissertations from 2014. Investigation of the effects of a blade profile geometry in a hinged blade cross axis turbine, Arvin H. Fernando. Design of a fuzzy GS-PID controller for payload drops of varying mass for a quadrotor, Ivan Henderson V. Gue. Energy audit of St. Joseph Hall and Miguel Hall of De La Salle University, Oswald D. Sapang.

  18. Moscow, Russia's best Mechanical Engineering universities [Rankings]

    Below is the list of 30 best universities for Mechanical Engineering in Moscow, Russia ranked based on their research performance: a graph of 269K citations received by 45.8K academic papers made by these universities was used to calculate ratings and create the top. ... Mendeleev University of Chemical Technology of Russia. For Mechanical ...

  19. Active carbons as nanoporous materials for solving of environmental

    Catalysis Conference is a networking event covering all topics in catalysis, chemistry, chemical engineering and technology during October 19-21, 2017 in Las Vegas, USA. ... Title : Active carbons as nanoporous materials for solving of ... Victor M. Mukhin defended a Ph. D. thesis and a doctoral thesis at the Mendeleev University of Chemical ...

  20. Mechanical Technology Thesis Title

    Mechanical Technology Thesis Title: 14 Customer reviews. 13 Customer reviews. Recent Review About this Writer. Submit. Nursing Business and Economics Management Healthcare +108. 14550 + 29 Customer reviews. ID 9011. Finest Essay Writing Service & Essay Writer. About Us. 656 . Finished Papers. Level: College, University, Master's, High School ...

  21. PDF Manufacturing and Mechanical Engineering Technology

    Thesis Option. The Master of Science in Mechanical and Manufacturing Engineering Technology (MMET) degree is an opportunity for students in the program to greatly expand their knowledge of design and integration of mechanical and manufacturing systems. Each student in the program will be able to customize the program to fit their specific needs ...

  22. Victor Mukhin

    Catalysis Conference is a networking event covering all topics in catalysis, chemistry, chemical engineering and technology during October 19-21, 2017 in Las Vegas, USA. Well noted as well attended meeting among all other annual catalysis conferences 2018, chemical engineering conferences 2018 and chemistry webinars.

  23. "Metallurgical Plant "Electrostal" JSC

    Round table 2021. "Electrostal" Metallurgical plant" JSC has a number of remarkable time-tested traditions. One of them is holding an annual meeting with customers and partners in an extеnded format in order to build development pathways together, resolve pressing tasks and better understand each other. Although the digital age ...